ctTransSrExpMode
CTRON-TRANSLATION-MIB ·
.1.3.6.1.4.1.52.4.1.3.4.7.1.1.3
Object
column
mandatory
r/w
Enumeration
This object selects the type of explorer frame the SR or SRT
interface will use, if and when an explorer frame is required.
This object is only applicable when ctTransSrIfMode is set to
sr (2) or srt (3). The requirements will depend on the device
being managed.
The inboundtype option (4) is supported only on those devices with
the ability to 'remember' the original state of the arriving
explorer packet. When set for this option the device will configure
all outbound explorer frames for whichever type of explorer
(ARE or STE) it arrived as.
The default value for this object is product specific. A write of
notsupported (1) will have no affect.
Context
- MIB
- CTRON-TRANSLATION-MIB
- OID
.1.3.6.1.4.1.52.4.1.3.4.7.1.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ctTransSrEntry
- Table
- ctTransSrTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notsupported |
2 | are |
3 | ste |
4 | inboundtype |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctTransSrPort mandatory The MIB-II interface number for which this entry
is administering source route configuration management. | column | Integer32 | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.1 |
| ctTransSrSRLF mandatory The maximum size of the INFO field (LLC and
above) that this interface can send/receive. It does
not include any MAC level (framing) octets. The
value of this object is used by … | column | Integer32 | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.10 |
| ctTransSRAutoRingNumberDetect mandatory This object enables an interface to automatically detect
the source route ring number of the attached ring segment.
When enabled, the interface wil automatically each time at
ope… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.11 |
| ctTransSrIfMode mandatory This object indicates the types of frames (sr,tp or both)
supported by endstations attached to this interface.
This information is used by the device to determine
if sr/tp transla… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.2 |
| ctTransSrIP mandatory This object determines how the sr/tp translation of IP frames
of type 'broadcast', 'destination unknown', or 'destination
known but IP not previously seen for this end station' … | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.4 |
| ctTransSrIPX mandatory This object determines how the sr/tp translation of IPX frames
of type `broadcast`, `destination unknown`, or `destination
known but IPX not previously seen for this end station… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.5 |
| ctTransSrNetBIOS mandatory This object determines how the sr/tp translation of NetBIOS frames
of type `broadcast`, `destination unknown`, or `destination
known but NetBIOS not previously seen for this end… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.6 |
| ctTransSrSNA mandatory This object determines how the sr/tp translation of SNA frames
of type 'broadcast', 'destination unknown', or 'destination
known but SNA not previously seen for this end station… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.7 |
| ctTransSrOther mandatory This object determines how the sr/tp translation of all 'other
protocols' is handled. 'other protocols' includes any protocol not
mentioned above (i.e. IP,IPX,NetBIOS, or SNA) … | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.8 |
| ctTransSRLocalSegment mandatory The segment (ring) number that uniquely identifies the
segment to which this interface is connected. Current
source routing protocols limit this value to the
range: 0 through 4095… | column | Integer32 | .1.3.6.1.4.1.52.4.1.3.4.7.1.1.9 |