sfpsL4CPFlowSecMatchAnyDyn
CTRON-SFPS-L4SS-MIB ·
.1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.5
Object
column
mandatory
Enumeration
If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023.
Context
- MIB
- CTRON-SFPS-L4SS-MIB
- OID
.1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- sfpsL4CPFlowEntry
- Table
- sfpsL4CPFlowTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | yes |
2 | no |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpsL4CPFlowCnxIndex mandatory Index (1-based) of the SFPSGAPI connection table entry
to which this flow belongs. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.1 |
| sfpsL4CPFlowPrimSubstApplies mandatory Indication of whether or not MAC address substitution
applies to the primary endpoint for this flow. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.10 |
| sfpsL4CPFlowSecInPkts mandatory Count of packets transmitted from primary to secondary. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.11 |
| sfpsL4CPFlowSecInOctets mandatory Count of octets transmitted from primary to secondary. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.12 |
| sfpsL4CPFlowPrimInPkts mandatory Count of packets transmitted from secondary to primary. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.13 |
| sfpsL4CPFlowPrimInOctets mandatory Count of octets transmitted from secondary to primary. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.14 |
| sfpsL4CPFlowFlowAge mandatory Time elapsed since this entry was created. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.15 |
| sfpsL4CPFlowFlowLastUse mandatory Time elapsed since this entry was last used to send data. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.16 |
| sfpsL4CPFlowID mandatory The Call Detail Recording flow ID for this flow, or zero
if CDR is not active for the flow. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.17 |
| sfpsL4CPFlowSecL3Address mandatory The Layer 3 address of the secondary endpoint for this flow.
The secondary endpoint is the one having the higher MAC address. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.2 |
| sfpsL4CPFlowPrimL3Address mandatory The Layer 3 address of the primary endpoint for this flow.
The primary endpoint is the one having the lower MAC address. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.3 |
| sfpsL4CPFlowSubprotocol mandatory This value identifies the Layer 4 protocol. It
corresponds to the IP 'Protocol' field as described
in the 'Assigned Numbers' RFC. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.4 |
| sfpsL4CPFlowPrimMatchAnyDyn mandatory If this is a TCP or UDP entry, this value specifies whether
or not the protocol port of the primary endpoint should
be treated as a wildcard, able to match any port number above
1… | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.6 |
| sfpsL4CPFlowSecProtPort mandatory If this is a TCP or UDP entry, this value indicates the
protocol port number of the secondary endpoint.
Otherwise, this field is zero. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.7 |
| sfpsL4CPFlowPrimProtPort mandatory If this is a TCP or UDP entry, this value indicates the
protocol port number of the primary endpoint.
Otherwise, this field is zero. | column | Integer32 | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.8 |
| sfpsL4CPFlowSecSubstApplies mandatory Indication of whether or not MAC address substitution
applies to the secondary endpoint for this flow. | column | Enumeration | .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.9 |