ctAutoNegReceivedTechnologyAbility
CTRON-ETHERNET-PARAMETERS-MIB ·
.1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.6
Object
column
mandatory
Integer32
Indicates the advertised ability of the remote hardware, or link
partner.
The value is a sum. This sum initially takes the value zero. Then, for
each technology, T, that the link partner supports, 2 raised to (T - 1)
is added to the sum. For example, a link partner advertising
1000BASE-TFD (T = 18) and 1000BASE-T (T = 17) would return a value
of 196608 ((2 ^ (18 - 1)) + (2 ^ (17 - 1))).
For ports supporting Auto-Negotiation, values should be calculated
as follows:
T Technology Description
-- ----------- ------------------------------------------------
1 global Reserved for future use.
2 other None of the following.
3 unknown Initializing, true state or type not yet known
4 10BASE-T 10BASE-T Half Duplex
5 10BASE-TFD 10BASE-T Full Duplex
6 100BASE-T4 100BASE-T4 Half Duplex
7 100BASE-TX 100BASE-TX Half Duplex
8 100BASE-TXFD 100BASE-TX Full Duplex
9 FDX PAUSE Full Duplex Flow Control
10 FDX APAUSE Full Duplex Asymmetric Flow Control
11 FDX SPAUSE Full Duplex Symmetric Flow Control
12 FDX BPAUSE Full Duplex Asymmetric and Symmetric Flow Control
13 100BASE-T2 100BASE-T2 Half Duplex
14 100BASE-T2FD 100BASE-T2 Full Duplex
15 1000BASE-X 1000BASE-X Half Duplex
16 1000BASE-XFD 1000BASE-X Full Duplex
17 1000BASE-T 1000BASE-T Half Duplex
18 1000BASE-TFD 1000BASE-T Full Duplex
19 Rem Fault1 Remote Fault Bit 1
20 Rem Fault2 Remote Fault Bit 2
21 ISO Ethernet IEEE Std 802.9 ISLAN-16T
Context
- MIB
- CTRON-ETHERNET-PARAMETERS-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ctAutoNegCtlEntry
- Table
- ctAutoNegCtlTable
- Siblings
- 5
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctAutoNegAdminStatus mandatory This object controls whether Auto-Negotiation is enabled
for the specified port. If Auto-Negotiation is disabled the port will
revert to the speed, duplex and flow control setti… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.1 |
| ctAutoNegRemoteSignalling mandatory This object indicates whether the remote end of the link is operating
Auto-Negotiation signalling or not. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.2 |
| ctAutoNegAutoConfig mandatory This object indicates whether Auto-Negotiation signalling is in
progress or has completed. | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.3 |
| ctAutoNegLocalTechnologyAbility mandatory This indicates the technology ability of the local hardware.
The value is a sum. This sum initially takes the value zero. Then, for
each technology, T, that the po… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.4 |
| ctAutoNegAdvertisedTechnologyAbility mandatory Indicates the advertised ability of the local hardware, but only
becomes active on ports that have auto-negotiation enabled.
The value is a sum. This sum initial… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.5 |