nwDecIVProtoIfPriority
CTRON-DECIV-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9
Object
column
mandatory
r/w
Integer32
Sets the priority of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. Within an area, the router with the highest value for nwDecIVProtoIfPriority becomes the priority or designated router. The highest possible value for nwDecIVProtocolIfPriority is 127. Set this value high to cause your DECnet Phase IV Routing Services-enabled device to become the designated router. Set this value low to guarantee that it does not become the designated router.
Context
- MIB
- CTRON-DECIV-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwDecIVProtoIfEntry
- Table
- nwDecIVProtoIfTable
- Siblings
- 16
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwDecIVProtoIfIndex mandatory Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.1 |
| nwDecIVProtoIfHelloTimer mandatory Sets the interval, in seconds, at which DECnet Phase IV
distance-vector-based routing protocol sends Hello packets on the
router port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.10 |
| nwDecIVProtoIfSplitHorizon mandatory This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Serv… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.11 |
| nwDecIVProtoIfPoisonReverse mandatory This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Serv… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.12 |
| nwDecIVProtoIfSnooping mandatory Controls the operation of DECnet Phase IV distance-vector-based
routing protocol snooping on the router port. When snooping is
enabled the DECnet Phase IV distance-vector-based r… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.13 |
| nwDecIVProtoIfType mandatory Indicates whether the directly connected network segment does or
does not support broadcast media access. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.14 |
| nwDecIVProtoIfXmitCost mandatory Sets the cost of transmitting a packet on the network segment
connected to the router port for which the entry exists. The DECnet
Phase IV distance-vector-based routing protocol p… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.15 |
| nwDecIVProtoIfAclIdentifier mandatory Specifies the Access Control ID of the access control list in
effect for DECnet Phase IV distance-vector-based routing protocol
packets on the router port for which the entry exis… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.16 |
| nwDecIVProtoIfAclStatus mandatory Controls the operation of the access control list identified by
nwDecIVProtoIfAclIdentifier. Enabled (3) applies the access control
list to all DECnet Phase IV distance-vector-bas… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.17 |
| nwDecIVProtoIfAdminStatus mandatory Sets the administrative state of the DECnet Phase IV
distance-vector-based routing protocol on the router port for which
the entry exists. Enabled (3) causes the routing protocol … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.2 |
| nwDecIVProtoIfOperStatus mandatory Indicates the current operating condition of the DECnet Phase IV
distance-vector-based routing protocol on the router port for which
the entry exists. The value of nwDecIVProtoIfO… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.3 |
| nwDecIVProtoIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second, that
nwDecIVProtoIfOperStatus has been in it`s current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.4 |
| nwDecIVProtoIfVersion mandatory Indicates the revision level of the DECnet Phase IV
distance-vector-based routing protocol firmware on the router port
for which the entry exists, in textual format. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.5 |
| nwDecIVProtoIfAdvertisement mandatory Sets the interval, in seconds, at which the DECnet Phase IV
distance-vectorbased routing protocol advertises its route table on
the router port for which the entry exists. Change … | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6 |
| nwDecIVProtoIfFloodDelay mandatory This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Serv… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7 |
| nwDecIVProtoIfRequestDelay mandatory This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Serv… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8 |