nwAtportZoneDefault
CTRON-AppleTalk-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10
Object
column
mandatory
r/w
AtName
Specifies the name of the default zone for the port. If the port only has one zone, that zone is represented here. If the port is not a native AppleTalk port, this object will contain an octet string of zero length.
Context
- MIB
- CTRON-AppleTalk-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwAtportEntry
- Table
- nwAtportTable
- Siblings
- 17
Syntax
AtName
- Source
- AtName
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwAtportIndex mandatory Indicates a unique value for each router port. The value
of nwAtportIndex is an integer between 1 and the total
number of ports configured for AppleTalk Routing
Services. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.1 |
| nwAtportIfIndex mandatory Indicates the value of MIB 2 ifIndex, which identifies
the router port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.11 |
| nwAtportNetFrom mandatory When nwAtportNetConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk network number was garnered. When
nwAtportNetConfig i… | column | AtDdpNodeAddress | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.12 |
| nwAtportZoneFrom mandatory When nwAtportZoneConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk Zone List was garnered. When
nwAtportZoneConfig is se… | column | AtDdpNodeAddress | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.13 |
| nwAtportInPkts mandatory The total number of AppleTalk packets received on the
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.14 |
| nwAtportOutPkts mandatory The total number of AppleTalk packets transmitted on the
port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.15 |
| nwAtportHome mandatory The value of nwAtportHome indicates whether or not the
AppleTalk Routing Services-enabled device, the routing
entity, is `homed' on the port for which the entry exists.
If the ent… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.16 |
| nwAtportCurrentZone mandatory Specifies the current zone name for the port. In
general, this is the zone name in which services on the
port will be registered. If the port is not a native
AppleTalk port, this… | column | AtName | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.17 |
| nwAtportConflictPhysAddr mandatory Indicates the link-layer address of the device which
caused nwAtportStatus to be set to off (3). If this
address is not available, or if nwAtportStatus is not
set to off, this obj… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.18 |
| nwAtportDescr mandatory This text string provides a description of the port to
the end-user; it must not contain anything but printable
ASCII characters. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.2 |
| nwAtportType mandatory The value of nwArPortType indicates which link-layer
protocol is running immediately below DDP in the protocol
stack on the router port for which the entry exists. The
value of nw… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.3 |
| nwAtportNetStart mandatory The first AppleTalk network address in the network range
configured for the port. If the port is not a native
AppleTalk port, this object will have the value of two
octets of zero… | column | AtNetworkNumber | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.4 |
| nwAtportNetEnd mandatory The last AppleTalk network address in the network range
configured for the port. If the network to which this
AppleTalk port is connected is a non-extended network, or
if it is no… | column | AtNetworkNumber | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.5 |
| nwAtportNetAddress mandatory The AppleTalk node number configured for the port. This
value may be used as a hint for an initial node number
used during node-finding. If the port is not a native
AppleTalk port… | column | AtDdpNodeAddress | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.6 |
| nwAtportSTATUS mandatory Indicates the current state of the router port's
AppleTalk configuration. If either nwAtportNetConfig or
nwApportZoneConfig are set to (5), conflictAverseSeed,
and either the con… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.7 |
| nwAtportNetConfig mandatory Specifies the network configuration type of the port.
If the port is not a native AppleTalk port, this object
will have an unconfigured (4) value. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.8 |
| nwAtportZoneConfig mandatory Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.9 |