nwAtFwdIfForwarding
CTRON-AppleTalk-ROUTER-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7
Object
column
mandatory
r/w
Enumeration
Controls forwarding of AppleTalk packets on the AppleTalk router port for which the entry exists. Enabled (3) causes AppleTalk packets to be forwarded. Disabled (2) prevents AppleTalk packets from being forwarded.
Context
- MIB
- CTRON-AppleTalk-ROUTER-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwAtFwdIfEntry
- Table
- nwAtFwdIfTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwAtFwdIfIndex mandatory Indicates the value of the MIB 2 ifIndex, which
identifies the router port for which the entry exists. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.1 |
| nwAtFwdIfAclSTATUS mandatory Controls the operation of any access control list
configured for AppleTalk traffic on the router port for
which the entry exists. Enabled (3) applies the access
control list indic… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.10 |
| nwAtFwdIfCacheControl mandatory Controls AppleTalk Address caching on the router port
for which the entry exists. When AppleTalk Address
caching is enabled, AppleTalk Addresses used for address
validation, filte… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.11 |
| nwAtFwdIfCacheEntries mandatory Indicates the number of entries in the AppleTalk Address
cache on the router port for which the entry exists. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.12 |
| nwAtFwdIfCacheHits mandatory Indicates the number of times entries in the AppleTalk
Address cache have been used to provide the AppleTalk
address required to validate, filter, or forward an
AppleTalk packet o… | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.13 |
| nwAtFwdIfCacheMisses mandatory Indicates the number of times the AppleTalk Address
required to validate, filter, or forward an AppleTalk
packet on the router port was not found in the AppleTalk
Address cache. | column | RFC1155-SMICounter | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.14 |
| nwAtFwdIfAdminSTATUS mandatory Sets the administrative state of AppleTalk Routing
Services on the router port for which the entry exists.
Enabled (3) causes AppleTalk Routing Services to become
active. Disabled… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.2 |
| nwAtFwdIfOperSTATUS mandatory Indicates the current operating condition of AppleTalk
Routing Services on the AppleTalk router port for which
the entry exists. The value of nwAtFwdIfOperStatus
indicates any pro… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3 |
| nwAtFwdIfOperationalTime mandatory Indicates the elapsed time, in hundredths of a second,
that nwAtFwdIfOper Status has been in its current state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.4 |
| nwAtFwdIfControl mandatory This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Ser… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.5 |
| nwAtFwdIfMtu mandatory Specifies the Maximum Transmissions Unit (MTU) for
AppleTalk packets on the router port for which the entry
exists. This includes the AppleTalk header and data, but
does not inclu… | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.6 |
| nwAtFwdIfFrameType mandatory Specifies the framing type for AppleTalk packets forwarded on the
router port for which the entry exists. Some frame types are only
valid for specific media types. The comments … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.8 |
| nwAtFwdIfAclIdentifier mandatory Specifies the Access Control ID of the access control
list in effect for AppleTalk packets being routed on
the router port for which the entry exists. A value of 0
indicates that … | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.9 |