nwAppnSysDirCacheSize

CTRON-APPN-MIB · .1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.7
MIB view Table view

Object

scalar mandatory r/w Integer32 
Specifies number of located resources maintained in the Directory
Cache.  Note: if nwAppnSysDirCacheSize is set to a value too small,
it will be internally increased to a higher value after APPN routing
services has been successfully enabled. A subsequent GET
operation on nwAppnSysDirCacheSize will reflect this new value.

Context

MIB
CTRON-APPN-MIB
OID
.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.7
Type
scalar
Access
readwrite
Status
mandatory
Parent
nwAppnSysCfgLocalNode
Siblings
23

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nwAppnSysNodeType mandatory
Indicates the node type supported by APPN Routing Services which is always of type Network Node.
scalarEnumeration.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.1
nwAppnSysRegCds mandatory
Specifies whether the local or domain resources can be registered with the Central Directory Server.
scalarEnumeration.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.10
nwAppnSysMdsSendQSize mandatory
Specifies size of the MDS send alert Queue.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.11
nwAppnSysCosSize mandatory
Specifies maximum number of COS definitions maintained in the COS database weights cache. It determines the size of the COS Database weights cache. Note: if nwAppnSysCosSize is s…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.12
nwAppnSysTreeSize mandatory
Specifies the number of routes maintained in the Topology Database routing tree cache. Note: if nwAppnSysTreeSize is set to a value too small, it will be internally increased to a…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.13
nwAppnSysTreeUseLimit mandatory
Maximum number of times a cached tree will be used to compute a route before the tree is discarded and recomputed. This allows the APPN Routing Services to balance sessions among…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.14
nwAppnSysMaxTdmNodes mandatory
Specifies maximum number of nodes that can be stored in the Topology Database. Zero means unlimited.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.15
nwAppnSysMaxTdmTGs mandatory
Specifies maximum number of transmission groups that can be stored in Topology Database. Zero means unlimited.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.16
nwAppnSysMaxIsrSessions mandatory
Specifies maximum number of intermediate routing sessions permitted by APPN Routing Services at one time. This must be a non-negative number.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.18
nwAppnSysIsrUpperThresh mandatory
The thresholds control the congestion status of APPN routing services. If the number of ISR sessions exceeds the upper threshold, congestion status changes from uncongested to co…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.19
nwAppnSysCpAlias mandatory
Specifies the Control Point alias name used by APPN Routing Services.
scalarOctetString.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.2
nwAppnSysIsrLowerThresh mandatory
Specifes the number of ISR sessions at which congestion status will revert to uncongested. This must be a non-negative number. nwAppnSysIsrLowerThresh must be less than nwAppnSysI…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.20
nwAppnSysIsrMaxRuSize mandatory
Specifies maximum RU size supported for intermediate sessions. Note: the number provided will be rounded up to the next valid RU size if necessary after APPN Routing Services has…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.21
nwAppnSysIsrRcvPaceWind mandatory
Specifies suggested receive pacing window size for intermediate sessions. This value may be used as a fixed window size for fixed pacing, or as a tuning value for adaptive pacing.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.22
nwAppnSysRtAddResist mandatory
Specifies a desirability factor for APPN Routing Services to perform intermediate session routing. 255 is least desirable and 0 is more desirable.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.23
nwAppnSysStopType mandatory
Specifies the type of APPN Routing Services shutdown. Once specified, select disable from nwAppnSysAdminStatus. The shutdown choices are as follows: abort(1) All …
scalarEnumeration.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.24
nwAppnSysBlockNum mandatory
This represents the 3 hexadecimal digit block number which precedes the 5 digit id number in the 8 digit node id used in XIDs and Alerts. The block number identifies the product …
scalarOctetString.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.25
nwAppnSysIdNum mandatory
This represents the 5 hexadecimal digit id number which follows the 3 digit block number in the 8 digit node id used in XIDs and Alerts. The id number uniquely identifies this ins…
scalarOctetString.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.26
nwAppnSysModeCosMap mandatory
Specifies whether mode to COS mapping is supported by APPN Routing Services.
scalarEnumeration.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.3
nwAppnSysMdsSupport mandatory
Specifies whether Management Services supports Multiple Domain Support and Management Services capabilities.
scalarEnumeration.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.4
nwAppnSysMaxLocates mandatory
Specifies maximum Number of locate requests that APPN Routing Services can concurrently process. Note: if nwAppnSysMaxLocates is set to a value too small, it will be internally in…
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.6
nwAppnSysMaxDirEntries mandatory
Specifies maximum number of directory entries. If zero is selected, the number of entries is unlimited.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.8
nwAppnSysLocateTimeout mandatory
Specifies time in seconds before a network search will timeout. Zero indicates that the search has no timeout.
scalarInteger32.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.9