nwAppnFwdLsDsap
CTRON-APPN-MIB ·
.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.32
Object
column
mandatory
r/w
OctetString
For a token ring or ethernet network, specifies the destination SAP address associated with the adjacent link station.
Context
- MIB
- CTRON-APPN-MIB
- OID
.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.32- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- nwAppnFwdLsEntry
- Table
- nwAppnFwdLsTable
- Siblings
- 31
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nwAppnFwdLsName mandatory Specifies the primary index to the adjacent link station table
(nwAppnFwdLsTable). | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.1 |
| nwAppnFwdLsAutoActSupport mandatory Specifies whether the link is automatically enabled when
a session is activated over the link. It is an error to set
this to yes(1) when nwAppnFwdLsCpCpSessSupp is set to yes(1). | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.10 |
| nwAppnFwdLsLimitedRsrc mandatory Specifies whether this link is to be deactivated when
there are no sessions using the link. If
nwAppnFwdLsCpCpSessSupp is yes, however, the link will
not be deactivated if CP-CP s… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.11 |
| nwAppnFwdLsSscpSession mandatory Requests a host system to initiate sessions between its SSCP and
dependent LUs within APPN Routing Services. If set to yes,
then nwAppnFwdLsPuName is required. Note: once this par… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.12 |
| nwAppnFwdLsPuName mandatory Specifies the name of the local PU if nwAppnFwdLsSscpSession is
set to yes. Valid characters are uppercase A through Z and
numerics 0 through 9. The name must start with an alph… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13 |
| nwAppnFwdLsBackLvlLenEN mandatory Specifies whether or not the adjacent node is a back level
LEN Node. If so, specify the type of back level LEN node as
follows:
xid3(2) - supports XID-3 proto… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.14 |
| nwAppnFwdLsCpCpSessSupp mandatory Specifies whether this link supports CP to CP sessions. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.16 |
| nwAppnFwdLsEffectCap mandatory Specifies th maximum kilo bits per second rate (link speed)
for the link. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.17 |
| nwAppnFwdLsConnectCost mandatory Specifies the cost per connect time for the link. Zero is the
lowest cost and 255 is the largest cost. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.18 |
| nwAppnFwdLsByteCost mandatory Specifies the cost per Byte for the link. Zero is the lowest
cost and 255 is the largest cost. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.19 |
| nwAppnFwdLsAdminStatus mandatory Sets the administrative state of a link to an adjacent
link station. enabled(3) causes the link to become established.
disable(2) causes the link to terminate. There are various
s… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.2 |
| nwAppnFwdLsSecurity mandatory Security selections available for the link are as follows:
non-secure - specifies no security.
public switched - data flows over a public switched
… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.20 |
| nwAppnFwdLsPropDelay mandatory Specifies the propagation delay which represents the relative
time it takes for a signal to travel the length of the link in
microseconds, with some of the more common default val… | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.21 |
| nwAppnFwdLsUsrDef1 mandatory Specifies user defined parameter 1. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.22 |
| nwAppnFwdLsUsrDef2 mandatory Specifies user defined parameter 2. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.23 |
| nwAppnFwdLsUsrDef3 mandatory Specifies user defined parameter 3. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.24 |
| nwAppnFwdLsTrgtPacingCount mandatory Species the desired pacing window size for BINDs on this
transmission group. The number is a value between 0 and 32767
and is significant only when fixed bind pacing is being used. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.25 |
| nwAppnFwdLsMaxSendBtu mandatory Specifies maximum Message Unit (MU) size that can be sent. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.26 |
| nwAppnFwdLsNumActiveSession mandatory Specifies total number of active sessions on this link.
This includes both end point sessions and intermediate sessions. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.27 |
| nwAppnFwdLsdynamicLs mandatory Specifies whether this link station was dynamically
allocated (yes(1)) or whether the link station was defined by
the user (no(2)). | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.28 |
| nwAppnFwdLsStopType mandatory Specifies the type of shutdown for a link. Once selected,
set disable in nwAppnFwdIfAdminStatus. The shutdown choices are
as follows:
immediate(1) causes the link … | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.29 |
| nwAppnFwdLsOperStatus mandatory Specifies the current operating status of the link for which this
entry exists. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.3 |
| nwAppnFwdLsPortNbr mandatory This link station port number corresponds to the index into
the nwAppnFwdIfTable and the nwAppnExtensionTable, which
together describe the port used by APPN Routing Services. | column | Integer32 | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.30 |
| nwAppnFwdLsDestAddr mandatory Specifies the destination address of the adjacent link station
depending on the media type. For token ring or ethernet ports,
the information is the 6 byte Destination MAC Address… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.31 |
| nwAppnFwdLsBlockNum mandatory This represents the 3 hexadecimal digit block number which
precedes the 5 digit id number in the 8 digit node id of the
adjacent node. The node id is used in XIDs and Alerts. The… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.33 |
| nwAppnFwdLsIdNum mandatory This represents the 5 hexadecimal digit id number which follows
the 3 digit block number in the 8 digit node id of the adjacent
node. The node id is used in XIDs and Alerts. The i… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.34 |
| nwAppnFwdLsOperationalTime mandatory Specifies the elapsed time, in hundredths of a second, that
nwAppnFwdLsAdminStatus has been either enabled or DISABLED.
If the operational state is pending-disable,
nwAppnFwdLsOpe… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.4 |
| nwAppnFwdLsControl mandatory Set this object to delete in order to delete the entry. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.5 |
| nwAppnFwdLsPortName mandatory This link station port name corresponds to the port name
index into the the nwAppnExtensionTable which describes the
router port on which the adjacent link station is defined. | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.6 |
| nwAppnFwdLsAdjCpName mandatory Specifies the fully-qualified, 17 byte long, adjacent Control
Point name. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN
is the network identifier and CCCCCCCC is the Control… | column | OctetString | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.7 |
| nwAppnFwdLsAdjCpType mandatory Specifies the adjacent node type. The following values are
valid: endnode(1), networknode(2). endnode(1) includes both
End Node and LEN node types. | column | Enumeration | .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.8 |