els100SysBrcastCutoffRate

CTELS100-NG-MIB · .1.3.6.1.4.1.52.1011.1.5
MIB view Table view

Object

scalar mandatory r/w Integer32 
The Broadcast Cutoff Rate of the switch allowing for the
control of broadcast storms. The value of this variable sets
a per second rate. If the broadcast and unknown destination
address frames being forwarded through the system surpass this
rate, they are dropped. Valid values for this parameter are
in the range (100..500000).

Context

MIB
CTELS100-NG-MIB
OID
.1.3.6.1.4.1.52.1011.1.5
Type
scalar
Access
readwrite
Status
mandatory
Parent
els100SystemConfig
Siblings
12

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
els100SysSerialno mandatory
The serial number of the system.
scalarOctetString.1.3.6.1.4.1.52.1011.1.1
els100SysReset mandatory
Initiate a software reset of the system.
scalarEnumeration.1.3.6.1.4.1.52.1011.1.10
els100SysSyslogServer mandatory
The IP address of the Syslog Server.
scalarRFC1155-SMINetworkAddress.1.3.6.1.4.1.52.1011.1.11
els100SysLowestSyslogSeverity mandatory
The Lowest Syslog Severity Level. All logs with the same or higher severity will be delivered. Note: higher severity has lower number.
scalarEnumeration.1.3.6.1.4.1.52.1011.1.12
els100SysComPortEnable mandatory
The administrative state of the Com Port.
scalarEnumeration.1.3.6.1.4.1.52.1011.1.13
els100SysBoardID mandatory
The system board ID.
scalarInteger32.1.3.6.1.4.1.52.1011.1.14
els100SysTftpIPAddress mandatory
The IP address of the TFTP server from which a software download is to be initiated. This variable must be set before a TFTP download can be started with the els100SysTftpStartDo…
scalarRFC1155-SMINetworkAddress.1.3.6.1.4.1.52.1011.1.2
els100SysTftpFilename mandatory
The name of the software upgrade file residing on the TFTP server. Path information must be included in the file name. This variable must be set before a TFTP download can be st…
scalarOctetString.1.3.6.1.4.1.52.1011.1.3
els100SysPowerupCount mandatory
The total number of times the system has powered up since it was shipped from the factory.
scalarInteger32.1.3.6.1.4.1.52.1011.1.4
els100SysGatewayIPAddress mandatory
The IP address of the next hop router (gateway) to which frames destined for an IP subnet different than what the system resides are sent.
scalarRFC1155-SMINetworkAddress.1.3.6.1.4.1.52.1011.1.6
els100SysTftpStartDownload mandatory
Start a TFTP download. A SET of this variable with the value download (1) initiates a TFTP download to upgrade the system software. The variables els100SysTftpIPAddress and els10…
scalarEnumeration.1.3.6.1.4.1.52.1011.1.7
els100SysBootPDhcpEnable mandatory
Enable or disable the operation of the BootP and DHCP protocols on the system. These protocols are used for automatically configuring the system's IP address information if a pr…
scalarEnumeration.1.3.6.1.4.1.52.1011.1.8