gfomE1T1ModeRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.471.20.1.32
Object
column
r/w
Enumeration
Remote FRM220-GFOM04/08 card E1/T1 Mode : 0:E1 (75 ohm) 1:E1 (120 ohm) 2:T1 (100 ohm)
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.471.20.1.32- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gfomRemoteEntry
- Table
- gfomRemoteTable
- Siblings
- 172
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gfomChassisIndexRemote A unique value for each Remote card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.471.20.1.1 |
| gfomFx1TxFaultRemote Remote FRM220-GFOM04/08 card fiber1 Tx fault:
0:Normal
1:Fault | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.10 |
| gfomOrderWireActiveRemote Remote FRM220-GFOM04/08 card Order Wire Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.100 |
| gfomAlarmStatusRemote Remote FRM220-GFOM04/08 card Alarm Status :
0:None
1:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.101 |
| gfomAlarmBuzzerStatusRemote Remote FRM220-GFOM04/08 card Alarm Buzzer Status :
0:Normal
1:Buzzer | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.102 |
| gfomAlarmRDIStatusRemote Remote FRM220-GFOM04/08 card Alarm RDI Status :
0:None
1:Remote Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.103 |
| gfomAlarmBuzzerRemote Remote FRM220-GFOM04/08 card Alarm Buzzer Active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.104 |
| gfomAlarmTriggerOpticalRemote Remote FRM220-GFOM04/08 card Alarm Trigger Optical:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.105 |
| gfomAlarmTriggerLANRemote Remote FRM220-GFOM04/08 card Alarm Trigger LAN:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.106 |
| gfomAlarmTriggerRDIRemote Remote FRM220-GFOM04/08 card Alarm Trigger RDI:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.107 |
| gfomDeviceActiveRemote Remote FRM220-GFOM04/08 card Device Active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.108 |
| gfomSetDefaultRemote Force remote FRM220-GFOM04/08 card to default :
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.109 |
| gfomFx1DDRemote Remote FRM220-GFOM04/08 card fiber1 Digital Diagnostic function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.11 |
| gfomPortResetRemote Force remote FRM220-GFOM04/08 card reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.110 |
| gfomFx1DDVendorRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.111 |
| gfomFx1DDPartNoRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.112 |
| gfomFx1DDFiberTypeRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.113 |
| gfomFx1DDWaveLenRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.114 |
| gfomFx1DDWaveLen2Remote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.115 |
| gfomFx1DDLinkLenRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.116 |
| gfomFx1DDLenUnitRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.117 |
| gfomFx1DDStatusRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.118 |
| gfomFx1DDRxSensRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.119 |
| gfomFx2LinkRemote Remote FRM220-GFOM04/08 card fiber2 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.12 |
| gfomFx1DDTxPwrRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.120 |
| gfomFx1DDRxPwrRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.121 |
| gfomFx1DDTempRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.122 |
| gfomFx1DDPwrMarginRemote Remote FRM220-GFOM04/08 card fiber1 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.471.20.1.123 |
| gfomFx2DDVendorRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.124 |
| gfomFx2DDPartNoRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.125 |
| gfomFx2DDFiberTypeRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.126 |
| gfomFx2DDWaveLenRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.127 |
| gfomFx2DDWaveLen2Remote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.128 |
| gfomFx2DDLinkLenRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.129 |
| gfomFx2TypeRemote Remote FRM220-GFOM04/08 card fiber2 type:
0:1*9
1:SFP | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.13 |
| gfomFx2DDLenUnitRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.130 |
| gfomFx2DDStatusRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.131 |
| gfomFx2DDRxSensRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.132 |
| gfomFx2DDTxPwrRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.133 |
| gfomFx2DDRxPwrRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.134 |
| gfomFx2DDTempRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.135 |
| gfomFx2DDPwrMarginRemote Remote FRM220-GFOM04/08 card fiber2 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.471.20.1.136 |
| gfomRemotePowerRemote Remote FRM220-GFOM04 Remote power fail:
0:Ok
1:Abnormal | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.137 |
| gfomFEFRemote Remote FRM220-GFOM04 FEF:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.138 |
| gfomPower1TypeRemote Remote FMUX800 Power1 Type:
0:None
1:DV-24V
2:DV-48V
3:AC
4:Empty | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.139 |
| gfomFx2TxFaultRemote Remote FRM220-GFOM04/08 card fiber2 Tx fault:
0:Normal
1:Fault | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.14 |
| gfomPower1StatusRemote Remote FMUX800 Power1 Status:
0:Abnormal
1:OK | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.140 |
| gfomPower2TypeRemote Remote FMUX800 Power2 Type:
0:None
1:DV-24V
2:DV-48V
3:AC
4:Empty | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.141 |
| gfomPower2StatusRemote Remote FMUX800 Power2 Status:
0:Abnormal
1:OK | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.142 |
| gfomUTP1LinkStatusRemote Remote FMUX800 card UTP1 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.143 |
| gfomUTP1SpeedStatusRemote Remote FMUX800 card UTP1 speed state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.144 |
| gfomUTP1DuplexStatusRemote Remote FMUX800 card UTP1 duplex state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.145 |
| gfomUTP1PortActiveRemote Remote FMUX800 card UTP1 Port Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.146 |
| gfomUTP1NegotiationRemote Remote FMUX800 card UTP1 Negotiation :
0:Auto
1:Manual | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.147 |
| gfomUTP1SpeedConfRemote Remote FMUX800 card UTP1 Speed :
0:10M
1:100M
2:1000M | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.148 |
| gfomUTP1DuplexConfRemote Remote FMUX800 card UTP1 Duplex :
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.149 |
| gfomFx2DDRemote Remote FRM220-GFOM04/08 fiber2 Digital Diagnostic function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.15 |
| gfomUTP2LinkStatusRemote Remote FMUX800 card UTP2 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.150 |
| gfomUTP2SpeedStatusRemote Remote FMUX800 card UTP2 speed state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.151 |
| gfomUTP2DuplexStatusRemote Remote FMUX800 card UTP2 duplex state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.152 |
| gfomUTP2PortActiveRemote Remote FMUX800 card UTP2 Port Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.153 |
| gfomUTP2NegotiationRemote Remote FMUX800 card UTP2 Negotiation :
0:Auto
1:Manual | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.154 |
| gfomUTP2SpeedConfRemote Remote FMUX800 card UTP3 Speed :
0:10M
1:100M
2:1000M | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.155 |
| gfomUTP2DuplexConfRemote Remote FMUX800 card UTP3 Duplex :
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.156 |
| gfomUTP3LinkStatusRemote Remote FMUX800 card UTP3 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.157 |
| gfomUTP3SpeedStatusRemote Remote FMUX800 card UTP3 speed state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.158 |
| gfomUTP3DuplexStatusRemote Remote FMUX800 card UTP3 duplex state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.159 |
| gfomFxWorkingPathRemote Remote FRM220-GFOM04/08 card Fx Working Path Status:
0:OP1
1:OP2 | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.16 |
| gfomUTP3PortActiveRemote Remote FMUX800 card UTP3 Port Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.160 |
| gfomUTP3NegotiationRemote Remote FMUX800 card UTP3 Negotiation :
0:Auto
1:Manual | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.161 |
| gfomUTP3SpeedConfRemote Remote FMUX800 card UTP3 Speed :
0:10M
1:100M
2:1000M | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.162 |
| gfomUTP3DuplexConfRemote Remote FMUX800 card UTP3 Duplex :
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.163 |
| gfomUTP4LinkStatusRemote Remote FMUX800 card UTP4 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.164 |
| gfomUTP4SpeedStatusRemote Remote FMUX800 card UTP4 speed state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.165 |
| gfomUTP4DuplexStatusRemote Remote FMUX800 card UTP4 duplex state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.166 |
| gfomUTP4PortActiveRemote Remote FMUX800 card UTP4 Port Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.167 |
| gfomUTP4NegotiationRemote Remote FMUX800 card UTP4 Negotiation :
0:Auto
1:Manual | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.168 |
| gfomUTP4SpeedConfRemote Remote FMUX800 card UTP4 Speed :
0:10M
1:100M
2:1000M | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.169 |
| gfomFxBitErrorCounterRemote Remote FRM220-GFOM04/08 card Fx Bit Error Counter | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.471.20.1.17 |
| gfomUTP4DuplexConfRemote Remote FMUX800 card UTP4 Duplex :
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.170 |
| gfomAlarmRelayStatusRemote Remote FMUX800 card Alarm Relay Status :
0:Normal
1:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.171 |
| gfomAlarmRelayRemote Remote FMUX800 card Alarm Relay Active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.172 |
| gfomAlarmTriggerPowerRemote Remote FMUX800 card Alarm Trigger Power:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.173 |
| gfomFxProtectionModeRemote Remote FRM220-GFOM04/08 card Fx Protection Mode:
0:Auto, Non-Revert
1:Auto, Revert
2:Manual Fx1
3:Manual Fx2 | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.18 |
| gfomFxALSRemote Remote FRM220-GFOM04/08 card Fx Auto Laser Shutdown :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.19 |
| gfomSlotIndexRemote A unique value for each Remote card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.471.20.1.2 |
| gfomFxLoopbackTestRemote Remote FRM220-GFOM04/08 card Fx Loopback Test:
0:Disable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.20 |
| gfomFxInserOneErrorBitRemote Remote FRM220-GFOM04/08 card Fx Bert Insert One Bit Error:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.21 |
| gfomFxClearBitErrorCounterRemote Remote FRM220-GFOM04/08 card Fx Clear Bit Error Counter:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.22 |
| gfomUTPLinkStatusRemote Remote FRM220-GFOM04/08 card UTP link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.23 |
| gfomUTPSpeedStatusRemote Remote FRM220-GFOM04/08 card UTP speed state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.24 |
| gfomUTPDuplexStatusRemote Remote FRM220-GFOM04/08 card UTP duplex state | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.25 |
| gfomUTPPortActiveRemote Remote FRM220-GFOM04/08 card UTP Port Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.26 |
| gfomUTPNegotiationRemote Remote FRM220-GFOM04/08 card UTP Negotiation :
0:Auto
1:Manual | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.27 |
| gfomUTPSpeedConfRemote Remote FRM220-GFOM04/08 card UTP Speed :
0:10M
1:100M
2:1000M | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.28 |
| gfomUTPDuplexConfRemote Remote FRM220-GFOM04/08 card UTP Duplex :
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.29 |
| gfomCardHWVerRemote Remote FRM220-GFOM04/08 card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.3 |
| gfomUTPFlowControlRemote Remote FRM220-GFOM04/08 card UTP Flow Control :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.30 |
| gfomUTPJumboFrameRemote Remote FRM220-GFOM04/08 card UTP Jumbo Frame :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.31 |
| gfomE1T1Channel1LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.33 |
| gfomE1T1Channel1AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.34 |
| gfomE1T1Channel1TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.35 |
| gfomE1T1Channel1PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.36 |
| gfomE1T1Channel1ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.37 |
| gfomE1T1Channel1LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.38 |
| gfomE1T1Channel1AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.39 |
| gfomCardFWVerRemote Remote FRM220-GFOM04/08 card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.4 |
| gfomE1T1Channel1LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 1 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.40 |
| gfomE1T1Channel2LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.41 |
| gfomE1T1Channel2AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.42 |
| gfomE1T1Channel2TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.43 |
| gfomE1T1Channel2PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.44 |
| gfomE1T1Channel2ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.45 |
| gfomE1T1Channel2LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.46 |
| gfomE1T1Channel2AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.47 |
| gfomE1T1Channel2LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 2 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.48 |
| gfomE1T1Channel3LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.49 |
| gfomCardCPLDVerRemote Remote FRM220-GFOM04/08 card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.5 |
| gfomE1T1Channel3AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.50 |
| gfomE1T1Channel3TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.51 |
| gfomE1T1Channel3PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.52 |
| gfomE1T1Channel3ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.53 |
| gfomE1T1Channel3LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.54 |
| gfomE1T1Channel3AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.55 |
| gfomE1T1Channel3LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 3 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.56 |
| gfomE1T1Channel4LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.57 |
| gfomE1T1Channel4AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.58 |
| gfomE1T1Channel4TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.59 |
| gfomCardFPGAVerRemote Remote FRM220-GFOM04/08 card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.6 |
| gfomE1T1Channel4PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.60 |
| gfomE1T1Channel4ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.61 |
| gfomE1T1Channel4LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.62 |
| gfomE1T1Channel4AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.63 |
| gfomE1T1Channel4LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 4 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.64 |
| gfomE1T1Channel5LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.65 |
| gfomE1T1Channel5AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.66 |
| gfomE1T1Channel5TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.67 |
| gfomE1T1Channel5PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.68 |
| gfomE1T1Channel5ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.69 |
| gfomModelRemote Remote FRM220-GFOM04/08 Mode:
0:FRM220-GFOM04
1:FRM220-GFOM08
2:FMUX800 | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.7 |
| gfomE1T1Channel5LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.70 |
| gfomE1T1Channel5AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel5 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.71 |
| gfomE1T1Channel5LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 5 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.72 |
| gfomE1T1Channel6LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.73 |
| gfomE1T1Channel6AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.74 |
| gfomE1T1Channel6TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.75 |
| gfomE1T1Channel6PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.76 |
| gfomE1T1Channel6ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.77 |
| gfomE1T1Channel6LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.78 |
| gfomE1T1Channel6AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.79 |
| gfomFx1LinkRemote Remote FRM220-GFOM04/08 card fiber1 link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.8 |
| gfomE1T1Channel6LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 6 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.80 |
| gfomE1T1Channel7LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.81 |
| gfomE1T1Channel7AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.82 |
| gfomE1T1Channel7TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.83 |
| gfomE1T1Channel7PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.84 |
| gfomE1T1Channel7ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.85 |
| gfomE1T1Channel7LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.86 |
| gfomE1T1Channel7AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.87 |
| gfomE1T1Channel7LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 7 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.88 |
| gfomE1T1Channel8LinkStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Link Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.89 |
| gfomFx1TypeRemote Remote FRM220-GFOM04/08 card fiber1 fiber type:
0:1*9
1:SFP | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.9 |
| gfomE1T1Channel8AISStatusRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 AIS Status | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.90 |
| gfomE1T1Channel8TxDriverFailureRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Tx Driver Failure | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.91 |
| gfomE1T1Channel8PerformanceRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Performance | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.471.20.1.92 |
| gfomE1T1Channel8ActiveRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Active :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.93 |
| gfomE1T1Channel8LinCodeRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Line Code :
0:HDB3/B8ZS
1:AMI | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.94 |
| gfomE1T1Channel8AutoAISRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Auto AIS :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.95 |
| gfomE1T1Channel8LoopBackRemote Remote FRM220-GFOM04/08 card E1/T1 Channel 8 Loopback Test :
0:Disable
1:LLB
2:RLB
3:RRLB | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.96 |
| gfomE1T1ClearPerformanceCounterRemote Remote FRM220-GFOM04/08 card E1/T1 Clear Performance Counter
GFOM04:1-4
GFOM08:1-8 | column | Integer32 | .1.3.6.1.4.1.4756.20.471.20.1.97 |
| gfomOrderWirePhoneRingRemote Remote FRM220-GFOM04/08 card Order Wire Phone Ring :
0:None
1:Ring | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.98 |
| gfomOrderWireTypeRemote Remote FRM220-GFOM04/08 card Order Wire Type :
1:2-Wire
2:4-Wire
3:Empty | column | Enumeration | .1.3.6.1.4.1.4756.20.471.20.1.99 |