fxoFXSTimingSelectRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.71.20.1.18
Object
column
r/w
Enumeration
Remote FRM220-FXO/FXS card timing select: 0:Salve 1:Master
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.71.20.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fxoFXSRemoteEntry
- Table
- fxoFXSRemoteTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fxoFXSChassisIndexRemote A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.71.20.1.1 |
| fxoFXSFXSHookRemote Remote FRM220-FXO/FXS card FXS ON/OFF hook:
0:on-hook
1:off-hook | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.10 |
| fxoFXSFxLinkRemote Remote FRM220-FXO/FXS fiber link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.11 |
| fxoFXSFxSignalRemote Remote FRM220-FXO/FXS fiber signal detected:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.12 |
| fxoFXSFxFEFRemote Remote FRM220-FXO/FXS card fiber detected Far End Fault:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.13 |
| fxoFXSPortResetRemote Force remote FRM220-FXO/FXS card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.14 |
| fxoFXSSetDefaultRemote Force remote FRM220-FXO/FXS card to default status:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.15 |
| fxoFXSOpModeRemote Remote FRM220-FXO/FXS card operation mode:
0:FXO
1:FXS (20~35)
2:FXS (40~55Hz)
3:FXS Leased Mode | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.16 |
| fxoFXSRingFreqRemote Remote FRM220-FXO/FXS card ring frequency select:
0:50~55Hz
1:40~45Hz
2:30~35Hz
3:20~25Hz
4:55Hz
5:50Hz
6:45Hz
7:40Hz
8:35Hz
9:30Hz
10:25Hz
11:20Hz | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.17 |
| fxoFXSLeasedLineRemote Remote FRM220-FXO/FXS card leased line mode:
0:Mode2
1:Mode1 | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.19 |
| fxoFXSSlotIndexRemote A unique value for each remote card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.71.20.1.2 |
| fxoFXSAlsModeRemote Remote FRM220-FXO/FXS card Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.20 |
| fxoFXSFxDDRemote Remote FRM220-FXO/FXS card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.21 |
| fxoFXSDDVendorRemote Remote FRM220-FXO/FXS card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.22 |
| fxoFXSDDPartNoRemote Remote FRM220-FXO/FXS card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.23 |
| fxoFXSDDFiberTypeRemote Remote FRM220-FXO/FXS card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.24 |
| fxoFXSDDWaveLenRemote Remote FRM220-FXO/FXS card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.25 |
| fxoFXSDDWaveLen2Remote Remote FRM220-FXO/FXS card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.26 |
| fxoFXSDDLinkLenRemote Remote FRM220-FXO/FXS card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.27 |
| fxoFXSDDLenUnitRemote Remote FRM220-FXO/FXS card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.28 |
| fxoFXSDDStatusRemote Remote FRM220-FXO/FXS card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.29 |
| fxoFXSCardHWVerRemote Remote FRM220-FXO/FXS card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.3 |
| fxoFXSDDRxSensRemote Remote FRM220-FXO/FXS card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.30 |
| fxoFXSDDTxPwrRemote Remote FRM220-FXO/FXS card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.31 |
| fxoFXSDDRxPwrRemote Remote FRM220-FXO/FXS card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.32 |
| fxoFXSDDTempRemote Remote FRM220-FXO/FXS card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.33 |
| fxoFXSDDPwrMarginRemote Remote FRM220-FXO/FXS card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.71.20.1.34 |
| fxoFXSDDPwrLossRemote Remote FRM220-FXO/FXS card fiber D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.71.20.1.35 |
| fxoFXSCardFWVerRemote Remote FRM220-FXO/FXS card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.4 |
| fxoFXSCardCPLDVerRemote Remote FRM220-FXO/FXS card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.5 |
| fxoFXSCardFPGAVerRemote Remote FRM220-FXO/FXS card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.71.20.1.6 |
| fxoFXSPortActiveRemote Remote FRM220-FXO/FXS card active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.7 |
| fxoFXSActiveStsRemote Remote FRM220-FXO/FXS FXO/FXS active state:
0:inactive
1:active | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.8 |
| fxoFXSRingStsRemote Remote FRM220-FXO/FXS card ring state:
0:noring
1:ringing | column | Enumeration | .1.3.6.1.4.1.4756.20.71.20.1.9 |