fet100FEFRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.341.20.1.17
Object
column
Enumeration
Remote FRM220-ET100 card fiber detected Far End Fault: 0:Off 1:Detected
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.341.20.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fet100RemoteEntry
- Table
- fet100RemoteTable
- Siblings
- 50
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fet100ChassisIndexRemote A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.341.20.1.1 |
| fet100SYSLedRemote Remote FRM220-ET100 card system led status:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.10 |
| fet100AlarmLedRemote Remote FRM220-ET100 card alarm led status:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.11 |
| fet100TestLedRemote Remote FRM220-ET100 card test led status:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.12 |
| fet100FxLinkRemote Remote FRM220-ET100 card fiber link:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.13 |
| fet100FxSignalAppearRemote Remote FRM220-ET100 card fiber signal appear:
0:Off
1:Have | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.14 |
| fet100FxSignalLossRemote Remote FRM220-ET100 card fiber singal loss:
0:Off
1:Have | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.15 |
| fet100FxSignalRemote Remote FRM220-ET100 card signal :
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.16 |
| fet100FxTypeRemote Remote FRM220-ET100 card fiber type:
0:1*9
1:SFP | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.18 |
| fet100AlsRemote Remote FRM220-ET100 card Auto Laser Shutdown:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.19 |
| fet100SlotIndexRemote A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.341.20.1.2 |
| fet100E1T1selRemote Remote FRM220-ET100 card ET100 Select:
0:e1
1:t1 | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.20 |
| fet100FullFractionalRemote Remote FRM220-ET100 card ET100 Full/Fractional:
0:full-e1t1
1:fraction-e1t1 | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.21 |
| fet100FramerRemote Remote FRM220-ET100 card ET100 Framer setting:
0:ccs-d4
1:cas-esf | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.22 |
| fet100CrcRemote Remote FRM220-ET100 card CRC setting:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.23 |
| fet100UnusedTimeslotCodeRemote Remote FRM220-ET100 card Unused timeslot code setting:
0:0x7e
1:0xff | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.24 |
| fet100TimesourceRemote Remote FRM220-ET100 card Timing Source:
0:recovery
1:internal | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.25 |
| fet100RateRemote Remote FRM220-ET100 card Active Timeslot Numbers:
E1 : CCS Mode CAS Mode T1:
1 64K 64K 64K
2 128K 128K 128K
3 192K … | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.26 |
| fet100TimeslotRemote Remote FRM220-ET100 card Start Timeslot: | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.341.20.1.27 |
| fet100LbsettingRemote Remote FRM220-ET100 card Loop Back setting:
0:off
5:lan-port-side-llb
6:lan-port-side-rlb
7:lan-port-side-rrlb | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.28 |
| fet100UtpLinkRemote Remote FRM220-ET100 card utp link state:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.29 |
| fet100CardHWVerRemote Remote FRM220-ET100 card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.3 |
| fet100UtpSpeedSTSRemote Remote FRM220-ET100 card utp speed state:
0:10M
1:100M | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.30 |
| fet100UtpDuplexSTSRemote Remote FRM220-ET100 card utp duplex status:
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.31 |
| fet100UtpNegoRemote Remote FRM220-ET100 card ET100 utp negoiation:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.32 |
| fet100UtpSpeedRemote Remote FRM220-ET100 card ET100 utp speed:
0:10M
1:100M | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.33 |
| fet100UtpDuplexRemote Remote FRM220-ET100 card ET100 utp duplex:
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.34 |
| fet100UtpFlowCrlRemote Remote FRM220-ET100 card ET100 utp flow control:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.35 |
| fet100HDLCFlowCrlRemote Remote FRM220-ET100 card ET100 HDLC flow control:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.36 |
| fet100FxDDRemote Remote FRM220-ET100 card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.37 |
| fet100DDVendorRemote Remote FRM220-ET100 card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.38 |
| fet100DDPartNoRemote Remote FRM220-ET100 card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.39 |
| fet100CardFWVerRemote Remote FRM220-ET100 card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.4 |
| fet100DDFiberTypeRemote Remote FRM220-ET100 card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.40 |
| fet100DDWaveLenRemote Remote FRM220-ET100 card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.41 |
| fet100DDWaveLen2Remote Remote FRM220-ET100 card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.42 |
| fet100DDLinkLenRemote Remote FRM220-ET100 card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.43 |
| fet100DDLenUnitRemote Remote FRM220-ET100 card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.44 |
| fet100DDStatusRemote Remote FRM220-ET100 card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.45 |
| fet100DDRxSensRemote Remote FRM220-ET100 card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.46 |
| fet100DDTxPwrRemote Remote FRM220-ET100 card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.47 |
| fet100DDRxPwrRemote Remote FRM220-ET100 card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.48 |
| fet100DDTempRemote Remote FRM220-ET100 card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.49 |
| fet100CardCPLDVerRemote Remote FRM220-ET100 card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.5 |
| fet100DDPwrMarginRemote Remote FRM220-ET100 card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.341.20.1.50 |
| fet100DDPwrLossRemote Remote FRM220-ET100 card fiber D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.341.20.1.51 |
| fet100CardFPGAVerRemote Remote FRM220-ET100 card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.341.20.1.6 |
| fet100PortResetRemote Force local FRM220-ET100 card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.7 |
| fet100SetDefaultRemote Force local FRM220-ET100 card to default status:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.8 |
| fet100PowerLedRemote Remote FRM220-ET100 card Power led status:
0:Off
1:On
2:Flash | column | Enumeration | .1.3.6.1.4.1.4756.20.341.20.1.9 |