fa5e1et100UtpLinkLocal

CTC-FRM220-MIB · .1.3.6.1.4.1.4756.20.110.20.1.56
MIB view Table view

Object

column Enumeration 
5E1-ET100T Series card UTP link status:
0:Link Down
1:Link Up

Context

MIB
CTC-FRM220-MIB
OID
.1.3.6.1.4.1.4756.20.110.20.1.56
Type
column
Access
readonly
Status
current
Parent
f5E1LocalEntry
Table
f5E1LocalTable
Siblings
145

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fa5e1et100ChassisIndexLocal
A unique value for each card. It starts from 0 to 9 contiguously.
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.1
fa5e1et100SetToDefaultLocal
5E1-ET100(T/S) Series card port set to default: 0:Off 1:Trigger
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.10
fa5e1et100SfpFiberTypeLocal
5E1-ET100(T/S) Series card, Fiber Type of SFP.
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.100
fa5e1et100SfpTxWaveLenLocal
5E1-ET100(T/S) Series card, Tx Wave length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.101
fa5e1et100SfpRxWaveLenLocal
5E1-ET100(T/S) Series card, Rx Wave length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.102
fa5e1et100SfpLinkLenLocal
5E1-ET100(T/S) Series card, Link length of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.103
fa5e1et100SfpModelIDLocal
5E1-ET100(T/S) Series card, model ID of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.104
fa5e1et100SfpVersionLocal
5E1-ET100(T/S) Series card, the version of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.105
fa5e1et100SfpModelTypeLocal
5E1-ET100(T/S) Series card, model type of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.106
fa5e1et100DDInformationLocal
5E1-ET100(T/S) Series card, D/D information of SFP Supported: 0:No, 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.107
fa5e1et100DDRxSensLocal
5E1-ET100(T/S) Series card, Sensitivity of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.108
fa5e1et100DDTxPowerLocal
5E1-ET100(T/S) Series card, Tx power of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.109
fa5e1et100E1Ch1SingalLocal
5E1-ET100(T/S) Series card E1 channel 1 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.11
fa5e1et100DDRxPowerLocal
5E1-ET100(T/S) Series card, Rx power of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.110
fa5e1et100DDTempLocal
5E1-ET100(T/S) Series card, Temperature of D/D information in degree C.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.111
fa5e1et100DDBiasLocal
5E1-ET100(T/S) Series card, BIAS of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.112
fa5e1et100DDVoltageLocal
5E1-ET100(T/S) Series card, Voltage of D/D information.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.113
fa5e1et100ChannelDefectLocal
5E1-ET100(T/S) Series card Channel Defect: 0:Disable 4:1E-4 6:1E-6
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.114
fa5e1et100LoopDetectionLocal
5E1-ET100(T/S) Series card Loop Detection: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.115
fa5e1et100LoopCh1Local
5E1-ET100(T/S) Series card E1 channel 1 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.116
fa5e1et100LoopCh2Local
5E1-ET100(T/S) Series card E1 channel 2 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.117
fa5e1et100LoopCh3Local
5E1-ET100(T/S) Series card E1 channel 3 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.118
fa5e1et100LoopCh4Local
5E1-ET100(T/S) Series card E1 channel 4 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.119
fa5e1et100E1Ch2SingalLocal
5E1-ET100(T/S) Series card E1 channel 2 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.12
fa5e1et100LoopCh5Local
5E1-ET100(T/S) Series card E1 channel 5 Loop Check State: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.120
fa5e1et100DefectCh1Local
5E1-ET100(T/S) Series card E1 channel 1 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.121
fa5e1et100DefectCh2Local
5E1-ET100(T/S) Series card E1 channel 2 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.122
fa5e1et100DefectCh3Local
5E1-ET100(T/S) Series card E1 channel 3 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.123
fa5e1et100DefectCh4Local
5E1-ET100(T/S) Series card E1 channel 4 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.124
fa5e1et100DefectCh5Local
5E1-ET100(T/S) Series card E1 channel 5 Defect Status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.125
fa5e1et100FxSignalLocal
5E1-ET100(T/S) Series card Fiber signal detect(SD): 0:Fiber unplugged 1:Signal detected
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.126
fa5e1et100PortResetLocal
5E1-ET100(T/S) Series card Port Reset: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.127
fa5e1et100VLANModeLocal
5E1-ET100(T/S) Series card VLAN mode: 0:MODE2 1:MODE1
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.128
fa5e1et100ETagSelectEntryLocal
5E1-ET100(T/S) Series card ETag select entry:
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.129
fa5e1et100E1Ch3SingalLocal
5E1-ET100(T/S) Series card E1 channel 3 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.13
fa5e1et100ETagMethodLocal
5E1-ET100(T/S) Series card ETag Method: 0: Intouch 1: Add Tag 2: Remove Tag
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.130
fa5e1et100VLANTableVID1Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID1
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.131
fa5e1et100VLANTableVID2Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID2
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.132
fa5e1et100VLANTableVID3Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID3
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.133
fa5e1et100VLANTableVID4Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID4
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.134
fa5e1et100VLANTableVID5Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID5
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.135
fa5e1et100VLANTableVID6Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID6
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.136
fa5e1et100VLANTableVID7Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID7
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.137
fa5e1et100VLANTableVID8Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID8
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.138
fa5e1et100VLANTableVID9Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID9
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.139
fa5e1et100E1Ch4SingalLocal
5E1-ET100(T/S) Series card E1 channel 4 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.14
fa5e1et100VLANTableVID10Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID10
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.140
fa5e1et100VLANTableVID11Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID11
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.141
fa5e1et100VLANTableVID12Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID12
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.142
fa5e1et100VLANTableVID13Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID13
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.143
fa5e1et100VLANTableVID14Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID14
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.144
fa5e1et100VLANTableVID15Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID15
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.145
fa5e1et100VLANTableVID16Local
5E1-ET100(T/S) Series card VLAN Table: VLAN ID16
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.146
fa5e1et100E1Ch5SingalLocal
5E1-ET100(T/S) Series card E1 channel 5 signal status: 0:Singal Loss 1:Normal
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.15
fa5e1et100E1Ch1SyncLocal
5E1-ET100(T/S) Series card E1 channel 1 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.16
fa5e1et100E1Ch2SyncLocal
5E1-ET100(T/S) Series card E1 channel 2 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.17
fa5e1et100E1Ch3SyncLocal
5E1-ET100(T/S) Series card E1 channel 3 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.18
fa5e1et100E1Ch4SyncLocal
5E1-ET100(T/S) Series card E1 channel 4 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.19
fa5e1et100SlotIndexLocal
A unique value for each card. It starts from 1 to 20 contiguously.
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.2
fa5e1et100E1Ch5SyncLocal
5E1-ET100(T/S) Series card E1 channel 5 sync status: 0:Sync Loss 1:Sync
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.20
fa5e1et100E1Ch1RecvAISLocal
5E1-ET100(T/S) Series card E1 channel 1 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.21
fa5e1et100E1Ch2RecvAISLocal
5E1-ET100(T/S) Series card E1 channel 2 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.22
fa5e1et100E1Ch3RecvAISLocal
5E1-ET100(T/S) Series card E1 channel 3 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.23
fa5e1et100E1Ch4RecvAISLocal
5E1-ET100(T/S) Series card E1 channel 4 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.24
fa5e1et100E1Ch5RecvAISLocal
5E1-ET100(T/S) Series card E1 channel 5 receive AIS status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.25
fa5e1et100E1Ch1ConnTypeLocal
5E1-ET100(T/S) Series card E1 channel 1 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.26
fa5e1et100E1Ch2ConnTypeLocal
5E1-ET100(T/S) Series card E1 channel 2 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.27
fa5e1et100E1Ch3ConnTypeLocal
5E1-ET100(T/S) Series card E1 channel 3 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.28
fa5e1et100E1Ch4ConnTypeLocal
5E1-ET100(T/S) Series card E1 channel 4 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.29
fa5e1et100CardHWVerLocal
5E1-ET100(T/S) Series card hardware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.3
fa5e1et100E1Ch5ConnTypeLocal
5E1-ET100(T/S) Series card E1 channel 5 connector type: 0:RJ-48C 1:BNC
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.30
fa5e1et100E1Ch1RAILocal
5E1-ET100(T/S) Series card E1 channel 1 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.31
fa5e1et100E1Ch2RAILocal
5E1-ET100(T/S) Series card E1 channel 2 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.32
fa5e1et100E1Ch3RAILocal
5E1-ET100(T/S) Series card E1 channel 3 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.33
fa5e1et100E1Ch4RAILocal
5E1-ET100(T/S) Series card E1 channel 4 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.34
fa5e1et100E1Ch5RAILocal
5E1-ET100(T/S) Series card E1 channel 5 RAI status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.35
fa5e1et100E1Ch1LOMFLocal
5E1-ET100(T/S) Series card E1 channel 1 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.36
fa5e1et100E1Ch2LOMFLocal
5E1-ET100(T/S) Series card E1 channel 2 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.37
fa5e1et100E1Ch3LOMFLocal
5E1-ET100(T/S) Series card E1 channel 3 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.38
fa5e1et100E1Ch4LOMFLocal
5E1-ET100(T/S) Series card E1 channel 4 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.39
fa5e1et100CardFWVerLocal
5E1-ET100(T/S) Series card firmware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.4
fa5e1et100E1Ch5LOMFLocal
5E1-ET100(T/S) Series card E1 channel 5 LOMF status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.40
fa5e1et100E1Ch1ActiveLocal
5E1-ET100(T/S) Series card E1 channel 1 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.41
fa5e1et100E1Ch2ActiveLocal
5E1-ET100(T/S) Series card E1 channel 2 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.42
fa5e1et100E1Ch3ActiveLocal
5E1-ET100(T/S) Series card E1 channel 3 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.43
fa5e1et100E1Ch4ActiveLocal
5E1-ET100(T/S) Series card E1 channel 4 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.44
fa5e1et100E1Ch5ActiveLocal
5E1-ET100(T/S) Series card E1 channel 5 active status: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.45
fa5e1et100E1Ch1LoopBackLocal
5E1-ET100(T/S) Series card port E1 channel 1 loop back: 0:Off 2:RLB (Max used 4 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.46
fa5e1et100E1Ch2LoopBackLocal
5E1-ET100(T/S) Series card port E1 channel 2 loop back: 0:Off 2:RLB (Max used 4 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.47
fa5e1et100E1Ch3LoopBackLocal
5E1-ET100(T/S) Series card port E1 channel 3 loop back: 0:Off 2:RLB (Max used 4 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.48
fa5e1et100E1Ch4LoopBackLocal
5E1-ET100(T/S) Series card port E1 channel 4 loop back: 0:Off 2:RLB (Max used 4 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.49
fa5e1et100CardCPLDVerLocal
5E1-ET100(T/S) Series card CPLD version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.5
fa5e1et100E1Ch5LoopBackLocal
5E1-ET100(T/S) Series card port E1 channel 5 loop back: 0:Off 2:RLB (Max used 4 channels)
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.50
fa5e1et100FxLinkLocal
5E1-ET100S Series card Fiber siganl detect status: 0:Down or Fiber unplugged 1:Up or Singal detected
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.51
fa5e1et100FxLaserLocal
5E1-ET100S Series card laser status: 0:Normal 1:Error
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.52
fa5e1et100FxActiveLocal
5E1-ET100S Series card Fiber active: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.53
fa5e1et100FxLaserOutputLocal
5E1-ET100S Series card laser output: 0:disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.54
fa5e1et100FxOpModeLocal
5E1-ET100S Series card operation mode: 0:Switch 1:Convert
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.55
fa5e1et100UtpStatusLocal
5E1-ET100T Series card UTP link mode status: 0:None, Maybe link down 1:Link at 10Mbps, Half duplex 2:Link at 10Mbps, Full duplex 3:Link at 100Mbps, Half duplex 4:Link at 100Mbps, …
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.57
fa5e1et100UtpFlowCtrlStsLocal
5E1-ET100T Series card UTP flow control status: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.58
fa5e1et100UtpModeLocal
5E1-ET100T Series card UTP mode: 0:Disable 1:Enable and autoNegotiation 3:Enable and force to 10Mbps, Half duplex 4:Enable and force to 10Mbps, Full duplex 5:Enable and force to 1…
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.59
fa5e1et100CardFPGAVerLocal
5E1-ET100(T/S) Series card FPGA version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.6
fa5e1et100UtpFlowCtrlLocal
5E1-ET100T Series card UTP flow control: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.60
fa5e1et100SpeedLimitLocal
5E1-ET100(T/S) Series card speed limit: Limited = this value * 32Kbps, this value is restricted to 0 ~ 3125, 0 to disable
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.61
fa5e1et100VlanAwareLocal
5E1-ET100(T/S) Series card 802.1q VLAN tag aware: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.62
fa5e1et100VlanIDLocal
5E1-ET100(T/S) Series card VLAN ID: The ID is restricted to 1 ~ 4094
columnInteger32.1.3.6.1.4.1.4756.20.110.20.1.63
fa5e1et100RemoteDeviceLocal
FRM220A-5E1 Series card remote device status: 0:Link Down 1:Link Up
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.64
fa5e1et100RemotePowerLocal
5E1-ET100(T/S) Series card remote device power status: 0:Normal 1:Power off
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.65
fa5e1et100TimingSourceLocal
5E1-ET100(T/S) Series card clock: 0:Internal oscillatro 1:Recovery from E1 channel 1 2:Recovery from E1 channel 2 3:Recovery from E1 channel 3 4:Recovery from E1 channel 4 5:Recov…
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.66
fa5e1et100FCSofGFPLocal
5E1-ET100(T/S) Series card FCS of GFP: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.67
fa5e1et100AutoChAdjustLocal
5E1-ET100(T/S) Series card auto channel Bdjust: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.68
fa5e1et100PayloadScrambleLocal
5E1-ET100(T/S) Series card payload scramble: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.69
fa5e1et100ModelLocal
Card Type: 0:5E1-ET100T 1:5E1-ET100S
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.7
fa5e1et100FailoverLocal
5E1-ET100(T/S) Series card failover: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.70
fa5e1et100LOMLocal
5E1-ET100(T/S) Series card LOM status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.71
fa5e1et100SQMLocal
5E1-ET100(T/S) Series card SQM status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.72
fa5e1et100CRCLocal
5E1-ET100(T/S) Series card CRC status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.73
fa5e1et100LOALocal
5E1-ET100(T/S) Series card LOA status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.74
fa5e1et100LFDLocal
5E1-ET100(T/S) Series card LFD status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.75
fa5e1et100DDTOLocal
5E1-ET100(T/S) Series card DDTO status: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.76
fa5e1et100VcatMember1Local
5E1-ET100(T/S) Series card VACT member 0: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.77
fa5e1et100VcatMember2Local
5E1-ET100(T/S) Series card VACT member 1: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.78
fa5e1et100VcatMember3Local
5E1-ET100(T/S) Series card VACT member 3: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.79
fa5e1et100SystemStatusLocal
5E1-ET100(T/S) Series card system status: 0:Normal 1:Alarm
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.8
fa5e1et100VcatMember4Local
5E1-ET100(T/S) Series card VACT member 4: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.80
fa5e1et100VcatMember5Local
5E1-ET100(T/S) Series card VACT member 5: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.81
fa5e1et100SnmpChannel1Local
5E1-ET100(T/S) Series card SNMP channel 0: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.82
fa5e1et100SnmpChannel2Local
5E1-ET100(T/S) Series card SNMP channel 1: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.83
fa5e1et100SnmpChannel3Local
5E1-ET100(T/S) Series card SNMP channel 3: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.84
fa5e1et100SnmpChannel4Local
5E1-ET100(T/S) Series card SNMP channel 4: 0:No use 1:Use
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.85
fa5e1et100ErrSecLocal
5E1-ET100(T/S) Series card, errored seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.110.20.1.86
fa5e1et100ErrFreeSecLocal
5E1-ET100(T/S) Series card, errored free seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.110.20.1.87
fa5e1et100ServErrSecLocal
5E1-ET100(T/S) Series card, severely errored seconds of BERT result.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4756.20.110.20.1.88
fa5e1et100BertFunctionLocal
5E1-ET100(T/S) Series card bert function: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.89
fa5e1et100DeviceActiveLocal
5E1-ET100(T/S) Series card active: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.9
fa5e1et100ClrBertDataLocal
5E1-ET100(T/S) Series card bert data clear: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.90
fa5e1et100BertE1ChannelLocal
5E1-ET100(T/S) Series card bert E1 channel number: 0:E1 channel 1 1:E1 channel 2 2:E1 channel 3 3:E1 channel 4 4:E1 channel 5
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.91
fa5e1et100RmonFunctionLocal
5E1-ET100(T/S) Series RMON function : 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.92
fa5e1et100RmonTxLocal
5E1-ET100(T/S) Series card RMON Tx counter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.93
fa5e1et100RmonRxLocal
5E1-ET100(T/S) Series card RMON Rx counter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.94
fa5e1et100ClrRmonTxLocal
5E1-ET100(T/S) Series card clear RMON Tx counter: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.95
fa5e1et100ClrRmonRxLocal
5E1-ET100(T/S) Series card clear RMON Rx counter: 0:Normal 1:Clear
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.96
fa5e1et100SfpLocal
5E1-ET100(T/S) Series card, SFP existed: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.110.20.1.97
fa5e1et100SfpVendorLocal
5E1-ET100(T/S) Series card, Vendor name of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.98
fa5e1et100SfpPartNoLocal
5E1-ET100(T/S) Series card, Vendor part number of SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.110.20.1.99