fSERIALFxSignalRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.81.20.1.11
Object
column
Enumeration
Remote FRM220-SERIAL fiber signal detected: 0:No 1:Yes
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.81.20.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fSERIALRemoteEntry
- Table
- fSERIALRemoteTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fSERIALChassisIndexRemote A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.81.20.1.1 |
| fSERIALFxLinkRemote Remote FRM220-SERIAL fiber link state:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.10 |
| fSERIALFxFEFRemote Remote FRM220-SERIAL card fiber detected Far End Fault:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.12 |
| fSERIALPortResetRemote Force remote FRM220-SERIAL card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.13 |
| fSERIALSetDefaultRemote Force remote FRM220-SERIAL card to default status:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.14 |
| fSERIALSerialModeRemote Remote FRM220-SERIAL card fSERIAL- port mode:
0:RS-422
1:RS-485
2:RS-232 5 wire
3:RS-232 3 wire | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.15 |
| fSERIALAlsModeRemote Remote FRM220-SERIAL card Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.16 |
| fSERIALFxDDRemote Remote FRM220-SERIAL card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.17 |
| fSERIALDDVendorRemote Remote FRM220-SERIAL card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.18 |
| fSERIALDDPartNoRemote Remote FRM220-SERIAL card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.19 |
| fSERIALSlotIndexRemote A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.81.20.1.2 |
| fSERIALDDFiberTypeRemote Remote FRM220-SERIAL card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.20 |
| fSERIALDDWaveLenRemote Remote FRM220-SERIAL card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.21 |
| fSERIALDDWaveLen2Remote Remote FRM220-SERIAL card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.22 |
| fSERIALDDLinkLenRemote Remote FRM220-SERIAL card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.23 |
| fSERIALDDLenUnitRemote Remote FRM220-SERIAL card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.24 |
| fSERIALDDStatusRemote Remote FRM220-SERIAL card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.25 |
| fSERIALDDRxSensRemote Remote FRM220-SERIAL card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.26 |
| fSERIALDDTxPwrRemote Remote FRM220-SERIAL card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.27 |
| fSERIALDDRxPwrRemote Remote FRM220-SERIAL card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.28 |
| fSERIALDDTempRemote Remote FRM220-SERIAL card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.29 |
| fSERIALCardHWVerRemote Remote FRM220-SERIAL card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.3 |
| fSERIALDDPwrMarginRemote Remote FRM220-SERIAL card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.81.20.1.30 |
| fSERIALDDPwrLossRemote Remote FRM220-SERIAL card fiber D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.81.20.1.31 |
| fSERIALCardFWVerRemote Remote FRM220-SERIAL card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.4 |
| fSERIALCardCPLDVerRemote Remote FRM220-SERIAL card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.5 |
| fSERIALCardFPGAVerRemote Remote FRM220-SERIAL card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.81.20.1.6 |
| fSERIALPortActiveRemote Remote FRM220-SERIAL card active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.7 |
| fSERIALDiStateRemote Remote FRM220-SERIAL data in state:
0:Space
1:Mark
2:Flash | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.8 |
| fSERIALDoStateRemote Remote FRM220-SERIAL data out state:
0:Space
1:Mark
2:Flash | column | Enumeration | .1.3.6.1.4.1.4756.20.81.20.1.9 |