fE1T1RelossTraisRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.101.20.1.22
Object
column
r/w
Enumeration
Remote FRM220-E1/T1 card Receive loss transmit AIS: 0:disable 1:enable
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.101.20.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fE1T1RemoteEntry
- Table
- fE1T1RemoteTable
- Siblings
- 47
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fE1T1ChassisIndexRemote A unique value for each Remote card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.101.20.1.1 |
| fE1T1ReAISRemote Remote FRM220-E1/T1 card active:
0:no
1:yes | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.10 |
| fE1T1ConTypeRemote Remote FRM220-E1/T1 card active:
0:rj-48c
1:bnc | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.11 |
| fE1T1FxLinkRemote Remote FRM220-E1/T1 fiber Link detected:
0:Link Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.12 |
| fE1T1FxSignalRemote Remote FRM220-E1/T1 fiber signal detected:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.13 |
| fE1T1FxFEFRemote Remote FRM220-E1/T1 card fiber detected Far End Fault:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.14 |
| fE1T1PortResetRemote Force Remote FRM220-E1/T1 card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.15 |
| fE1T1SetDefaultRemote Force Remote FRM220-E1/T1 card to default status:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.16 |
| fE1T1E1T1selRemote Remote FRM220-E1/T1 card E1/T1 Select:
0:e1
1:t1 | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.17 |
| fE1T1LineCodeRemote Remote FRM220-E1/T1 card E1/T1 Line Code setting:
0:hdb3-b8zs
1:ami | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.18 |
| fE1T1FullFractionalRemote Remote FRM220-E1/T1 card E1/T1 Full/Fractional:
0:full-e1t1
1:fraction-e1t1 | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.19 |
| fE1T1SlotIndexRemote A unique value for each Remote card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.101.20.1.2 |
| fE1T1FramerRemote Remote FRM220-E1/T1 card E1/T1 Framer setting:
0:ccs-d4
1:cas-esf | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.20 |
| fE1T1CrcRemote Remote FRM220-E1/T1 card CRC setting:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.21 |
| fE1T1UnusedTimeslotCodeRemote Remote FRM220-E1/T1 card Unused timeslot code setting:
0:0x7e
1:0xff | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.23 |
| fE1T1TrtimesourceRemote Remote FRM220-E1/T1 card Timing Source:
0:recovery from remote transmit side
1:recovery-from-e1t1 Receive
2:internal-oscillator
3:reserve | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.24 |
| fE1T1AlsRemote Remote FRM220-E1/T1 card Auto Laser Shutdown:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.25 |
| fE1T1RateRemote Remote FRM220-E1/T1 card Active Timeslot Numbers:
E1 : CCS Mode CAS Mode T1:
1 64K 64K 64K
2 128K 128K 128K
3 192K … | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.26 |
| fE1T1TimeslotRemote Remote FRM220-E1/T1 card Start Timeslot: | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.101.20.1.27 |
| fE1T1LbsettingRemote Remote FRM220-E1/T1 card Loop Back setting:
0:off
5:e1t1-port-side-llb
6:e1t1-port-side-rlb
7:e1t1-port-side-rrlb | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.28 |
| fE1T1RdstateRemote Remote FRM220-E1/T1 card RD state:
0:on
1:off
2:flash | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.29 |
| fE1T1CardHWVerRemote Remote FRM220-E1/T1 card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.3 |
| fE1T1TdstateRemote Remote FRM220-E1/T1 card TD state:
0:on
1:off
2:flash | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.30 |
| fE1T1TeststateRemote Remote FRM220-E1/T1 card Test mode:
0:normal
1:at-test-mode | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.31 |
| fE1T1FxDDRemote Remote FRM220-E1/T1 card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.32 |
| fE1T1DDVendorRemote Remote FRM220-E1/T1 card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.33 |
| fE1T1DDPartNoRemote Remote FRM220-E1/T1 card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.34 |
| fE1T1DDFiberTypeRemote Remote FRM220-E1/T1 card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.35 |
| fE1T1DDWaveLenRemote Remote FRM220-E1/T1 card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.36 |
| fE1T1DDWaveLen2Remote Remote FRM220-E1/T1 card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.37 |
| fE1T1DDLinkLenRemote Remote FRM220-E1/T1 card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.38 |
| fE1T1DDLenUnitRemote Remote FRM220-E1/T1 card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.39 |
| fE1T1CardFWVerRemote Remote FRM220-E1/T1 card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.4 |
| fE1T1DDStatusRemote Remote FRM220-E1/T1 card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.40 |
| fE1T1DDRxSensRemote Remote FRM220-E1/T1 card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.41 |
| fE1T1DDTxPwrRemote Remote FRM220-E1/T1 card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.42 |
| fE1T1DDRxPwrRemote Remote FRM220-E1/T1 card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.43 |
| fE1T1DDTempRemote Remote FRM220-E1/T1 card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.44 |
| fE1T1DDPwrMarginRemote Remote FRM220-E1/T1 card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.101.20.1.45 |
| fE1T1DDPwrLossRemote Remote FRM220-E1/T1 card fiber D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.101.20.1.46 |
| fE1T1FxLinkAlarmRemote Remote FRM220-E1/T1 card fiber link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.47 |
| fE1T1LinkAlarmRemote Remote FRM220-E1/T1 card E1T1 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.48 |
| fE1T1CardCPLDVerRemote Remote FRM220-E1/T1 card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.5 |
| fE1T1CardFPGAVerRemote Remote FRM220-E1/T1 card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.101.20.1.6 |
| fE1T1PortActiveRemote Remote FRM220-E1/T1 card active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.7 |
| fE1T1SignalRemote Remote FRM220-E1/T1 card active:
0:signal-loss
1:normal | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.8 |
| fE1T1SyncRemote Remote FRM220-E1/T1 card active:
0:sync-loss
1:sync | column | Enumeration | .1.3.6.1.4.1.4756.20.101.20.1.9 |