fDATAReDataRateGpRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.91.20.1.18
Object
column
r/w
Enumeration
Remote FRM220-DATA card Receive Data Rate Group Index Receive Data Rate Group Select 0 Group 1, N*64, N from 1 to 32, 64K~2048K 1 Group 2, N*64K, N from 33 to 64, 2112K~4096K 2 Group 3, N*64K, N from 65 to 96, 4160K~6144K 3 Group 4, N*64K, N from 97 to 128, 6208K~8192K 4 Group 5, N*64K, N from 129 to 143, 8256K~9152K 5 Group 6, Low Speed Rate, 75~460800 7 Group 7, Async
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.91.20.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fDATARemoteEntry
- Table
- fDATARemoteTable
- Siblings
- 52
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fDATAChassisIndexRemote A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.91.20.1.1 |
| fDATAFxFEFRemote Remote FRM220-DATA card fiber detected Far End Fault:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.10 |
| fDATAPortResetRemote Force Remote FRM220-DATA card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.11 |
| fDATASetDefaultRemote Force Remote FRM220-DATA card to default status:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.12 |
| fDATARdStateRemote Remote FRM220-DATA card RD State:
0:on
1:off
2:flash | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.13 |
| fDATATdStateRemote Remote FRM220-DATA card TD State:
0:on
1:off
2:flash | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.14 |
| fDATARtsStateRemote Remote FRM220-DATA card RTS State:
0:on
1:off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.15 |
| fDATACtsStateRemote Remote FRM220-DATA card CTS State:
0:on
1:off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.16 |
| fDATADcdStateRemote Remote FRM220-DATA card DCD State:
0:on
1:off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.17 |
| fDATAReDataRateRemote Remote FRM220-DATA card Receive Data Rate
Index Receive Data Rate Select
Group1 Group2 Group3 Group4 Group5 Group6 Group7
0 64K 2112K 4160K 6208K 825… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.91.20.1.19 |
| fDATASlotIndexRemote A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.91.20.1.2 |
| fDATAReTimeSourceRemote Remote FRM220-DATA card Receive Timing Source State
0:recovery from remote transmit side
1:internal
2:etc/rc input
3:recovery from remote receive side | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.20 |
| fDATATrDataRateGpRemote Remote FRM220-DATA card Transmit Data Rate Group
Index Transmit Data Rate Group Select
0 Group 1, N*64, N from 1 to 32, 64K~2048K
1 Group 2, N*64K, N from 3… | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.21 |
| fDATATrDataRateRemote Remote FRM220-DATA card Transmit Data Rate
Index Transmit Data Rate Select
Group1 Group2 Group3 Group4 Group5 Group6 Group7
0 64K 2112K 4160K 6208K 8256… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.91.20.1.22 |
| fDATATrTimeSourceRemote Remote FRM220-DATA card Transmit Timing Source State
0:Same as Reveive Timing Source
1:internal
2:etc/rc input
3:recovery from remote receive side | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.23 |
| fDATADsrdtrRemote Remote FRM220-DATA card DSR/DTR output setting
0:constantly on
1:follow local dtr/dsr input
2:follow remote dtr/dsr input | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.24 |
| fDATACtsrtsRemote Remote FRM220-DATA card CTS/RTS output setting
0:constantly on
1:follow local cts/rts input
2:follow remote cts/rts input | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.25 |
| fDATAEtcRemote Remote FRM220-DATA card ETC polarity setting
0:normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.26 |
| fDATATcRemote Remote FRM220-DATA card TC polarity setting
0:normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.27 |
| fDATARcRemote Remote FRM220-DATA card RC polarity setting
0:normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.28 |
| fDATAAlsModeRemote Remote FRM220-DATA card Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.29 |
| fDATACardHWVerRemote Remote FRM220-DATA card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.3 |
| fDATADataPortModeRemote Remote FRM220-DATA card Data Port Mode setting
0:DCE Mode
1:DTE Mode | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.30 |
| fDATADataPotrinterfaceRemote Remote FRM220-DATA card Data Port Interface setting
0:rs530Remotes-449-x21
1:v35
2:rs-232 | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.31 |
| fDATALbsettingRemote Remote FRM220-DATA card Loop Back Function & Select setting
0:off
5:data port side llb
6:data port side rlb
7:data port side rrlb | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.32 |
| fDATADcdoutsetRemote Remote FRM220-DATA card DCD output setting
0:constantly on
1:follow remote dcd input | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.33 |
| fDATADsrStateRemote Remote FRM220-DATA card DSR State
0:On
1:Off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.34 |
| fDATADtrStateRemote Remote FRM220-DATA card DTR State
0:On
1:Off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.35 |
| fDATARlbStateRemote Remote FRM220-DATA card RLB State
0:On
1:Off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.36 |
| fDATALlbStateRemote Remote FRM220-DATA card LLB State
0:On
1:Off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.37 |
| fDATATmStateRemote Remote FRM220-DATA card TM State
0:On
1:Off | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.38 |
| fDATAFxDDRemote Remote FRM220-DATA card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.39 |
| fDATACardFWVerRemote Remote FRM220-DATA card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.4 |
| fDATADDVendorRemote Remote FRM220-DATA card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.40 |
| fDATADDPartNoRemote Remote FRM220-DATA card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.41 |
| fDATADDFiberTypeRemote Remote FRM220-DATA card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.42 |
| fDATADDWaveLenRemote Remote FRM220-DATA card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.43 |
| fDATADDWaveLen2Remote Remote FRM220-DATA card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.44 |
| fDATADDLinkLenRemote Remote FRM220-DATA card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.45 |
| fDATADDLenUnitRemote Remote FRM220-DATA card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.46 |
| fDATADDStatusRemote Remote FRM220-DATA card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.47 |
| fDATADDRxSensRemote Remote FRM220-DATA card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.48 |
| fDATADDTxPwrRemote Remote FRM220-DATA card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.49 |
| fDATACardCPLDVerRemote Remote FRM220-DATA card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.5 |
| fDATADDRxPwrRemote Remote FRM220-DATA card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.50 |
| fDATADDTempRemote Remote FRM220-DATA card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.51 |
| fDATADDPwrMarginRemote Remote FRM220-DATA card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.91.20.1.52 |
| fDATADDPwrLossRemote Remote FRM220-DATA card fiber D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.91.20.1.53 |
| fDATACardFPGAVerRemote Remote FRM220-DATA card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.91.20.1.6 |
| fDATAPortActiveRemote Remote FRM220-DATA card active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.7 |
| fDATAFxLinkRemote Remote FRM220-DATA fiber Link detected:
0:Link Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.8 |
| fDATAFxSignalRemote Local FRM220-DATA fiber signal detected:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.91.20.1.9 |