f10GFx1Lbsetting
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.270.20.1.23
Object
column
r/w
Enumeration
Local FRM220-10G card Fiber1 Loopback: 0:Off 1:On
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.270.20.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f10GEntry
- Table
- f10GTable
- Siblings
- 116
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f10GChassisIndex A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.270.20.1.1 |
| f10GFx2Link Local FRM220-10G card Fiber2 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.10 |
| f10GTunableXFP3Wavelength Set Tunable XFP3 Wavelength (ITU-T CH):
The channel is restricted to 20 ~ 61 | column | Integer32 | .1.3.6.1.4.1.4756.20.270.20.1.100 |
| f10GLineRxPowerStatus Local 10G-SXX card Line Rx Power Status:
0:Normal
1:Warning
2:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.101 |
| f10GLineRxPowerWarningThreshold Set Line Rx Power Warning Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.102 |
| f10GLineRxPowerAlarmThreshold Set Line Rx Power Alarm Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.103 |
| f10GLineRxPowerStatusAlarm Local 10G-SXX card Line Rx Power Status trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.104 |
| f10GLineLosAssertAlarm Local 10G-SXX card Line LOS Assert trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.105 |
| f10GPriRxPowerStatus Local 10G-SXX card Primary Rx Power Status:
0:Normal
1:Warning
2:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.106 |
| f10GPriRxPowerWarningThreshold Set Primary Rx Power Warning Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.107 |
| f10GPriRxPowerAlarmThreshold Set Primary Rx Power Alarm Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.108 |
| f10GPriRxPowerStatusAlarm Local 10G-SXX card Primary Rx Power Status trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.109 |
| f10GFx3Link Local FRM220-10G card Fiber3 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.11 |
| f10GPriLosAssertAlarm Local 10G-SXX card Primary LOS Assert trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.110 |
| f10GSecRxPowerStatus Local 10G-SXX card Secondary Rx Power Status:
0:Normal
1:Warning
2:Alarm | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.111 |
| f10GSecRxPowerWarningThreshold Set Secondary Rx Power Warning Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.112 |
| f10GSecRxPowerAlarmThreshold Set Secondary Rx Power Alarm Threshold:
Input range is from -40 to +10. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.113 |
| f10GSecRxPowerStatusAlarm Local 10G-SXX card Secondary Rx Power Status trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.114 |
| f10GSecLosAssertAlarm Local 10G-SXX card Secondary LOS Assert trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.115 |
| f10GTunableXFP2 Local 10G-SXX card Tunable XFP2.
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.116 |
| f10GTunableXFP3 Local 10G-SXX card Tunable XFP3.
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.117 |
| f10GFx1CDRLocked Local FRM220-10G card Fiber1 CRD Locked:
0:Not Locked
1:Locked | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.12 |
| f10GFx2CDRLocked Local FRM220-10G card Fiber2 CRD Locked:
0:Not Locked
1:Locked | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.13 |
| f10GFx3CDRLocked Local FRM220-10G card Fiber3 CRD Locked:
0:Not Locked
1:Locked | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.14 |
| f10GFx1LossPropagation Local FRM220-10G card Fiber1 Loss Propagation:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.15 |
| f10GFx2andFx3LossPropagation Local FRM220-10G card Fiber2 and Fiber3 Loss Propagation:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.16 |
| f10GFx1AlsMode Local FRM220-10G card Fiber1 Auto Laser Showdown:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.17 |
| f10GFx2AlsMode Local FRM220-10G card Fiber2 Auto Laser Showdown:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.18 |
| f10GFx3AlsMode Local FRM220-10G card Fiber3 Auto Laser Showdown:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.19 |
| f10GSlotIndex A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.270.20.1.2 |
| f10GPortReset Force local FRM220-10G card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.20 |
| f10GSetDefault Local FRM220-10G card set to default :
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.21 |
| f10GSystemOK Local FRM220-10G card system status:
0:Failure
1:Ok | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.22 |
| f10GFx2Lbsetting Local FRM220-10G card Fiber1 Loopback:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.24 |
| f10GFx3Lbsetting Local FRM220-10G card Fiber3 Loopback:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.25 |
| f10GLbEnable Local FRM220-10G card Loopback mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.26 |
| f10GBaudRate Local FRM220-10G card BaudRate:
0:10G Ethernet
1:10G Fiber Channel
2:OC-192/STM-64
3:G.709 OTU2
4:1G Fiber Channel
5:2G Fiber Channel
6:4G Fiber Channel
7:8G Fiber Channel
8:1G Et… | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.27 |
| f10GOpticFxPro Local FRM220-10G card optic fiber protection:
0:Manual
1:Auto
2:Semi-Auto
3:Pri to Sec | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.28 |
| f10GActivePath Local FRM220-10G card Loopback mode:
0:Primary
1:Second | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.29 |
| f10GCardHWVer Local FRM220-10G card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.3 |
| f10GFx1LinkAlarm Local FRM220-10G card Fx1 Link Alarm:
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.30 |
| f10GFx2LinkAlarm Local FRM220-10G card Fx2 Link Alarm:
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.31 |
| f10GFx3LinkAlarm Local FRM220-10G card Fx3 Link Alarm:
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.32 |
| f10GFx1DD Local FRM220-10G card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.33 |
| f10GFx1DDVendor Local FRM220-10G card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.34 |
| f10GFx1DDPartNo Local FRM220-10G card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.35 |
| f10GFx1DDFiberType Local FRM220-10G card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.36 |
| f10GFx1DDWaveLen Local FRM220-10G card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.37 |
| f10GFx1DDWaveLen2 Local FRM220-10G card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.38 |
| f10GFx1DDLinkLen Local FRM220-10G card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.39 |
| f10GCardFWVer Local FRM220-10G card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.4 |
| f10GFx1DDLenUnit Local FRM220-10G card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.40 |
| f10GFx1DDStatus Local FRM220-10G card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.41 |
| f10GFx1DDRxSens Local FRM220-10G card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.42 |
| f10GFx1DDTxPWR Local FRM220-10G card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.43 |
| f10GFx1DDRxPWR Local FRM220-10G card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.44 |
| f10GFx1DDTemp Local FRM220-10G card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.45 |
| f10GFx1DDPWRMargin Local FRM220-10G card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.270.20.1.46 |
| f10GFx2DD Local FRM220-10G card fiber2 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.47 |
| f10GFx2DDVendor Local FRM220-10G card fiber2 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.48 |
| f10GFx2DDPartNo Local FRM220-10G card fiber2 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.49 |
| f10GCardCPLDVer Local FRM220-10G card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.5 |
| f10GFx2DDFiberType Local FRM220-10G card fiber2 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.50 |
| f10GFx2DDWaveLen Local FRM220-10G card fiber2 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.51 |
| f10GFx2DDWaveLen2 Local FRM220-10G card fiber2 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.52 |
| f10GFx2DDLinkLen Local FRM220-10G card fiber2 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.53 |
| f10GFx2DDLenUnit Local FRM220-10G card fiber2 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.54 |
| f10GFx2DDStatus Local FRM220-10G card fiber2 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.55 |
| f10GFx2DDRxSens Local FRM220-10G card fiber2 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.56 |
| f10GFx2DDTxPWR Local FRM220-10G card fiber2 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.57 |
| f10GFx2DDRxPWR Local FRM220-10G card fiber2 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.58 |
| f10GFx2DDTemp Local FRM220-10G card fiber2 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.59 |
| f10GCardFPGAVer Local FRM220-10G card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.6 |
| f10GFx2DDPWRMargin Local FRM220-10G card fiber2 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.270.20.1.60 |
| f10GFx3DD Local FRM220-10G card fiber Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.61 |
| f10GFx3DDVendor Local FRM220-10G card fiber D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.62 |
| f10GFx3DDPartNo Local FRM220-10G card fiber D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.63 |
| f10GFx3DDFiberType Local FRM220-10G card fiber D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.64 |
| f10GFx3DDWaveLen Local FRM220-10G card fiber D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.65 |
| f10GFx3DDWaveLen2 Local FRM220-10G card fiber D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.66 |
| f10GFx3DDLinkLen Local FRM220-10G card fiber D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.67 |
| f10GFx3DDLenUnit Local FRM220-10G card fiber D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.68 |
| f10GFx3DDStatus Local FRM220-10G card fiber D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.69 |
| f10GModel Local CardType:
0:FRM220-10G/SXX
1:FRM220-10G/SX
2:FRM220-10G/XX | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.7 |
| f10GFx3DDRxSens Local FRM220-10G card fiber D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.70 |
| f10GFx3DDTxPWR Local FRM220-10G card fiber D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.71 |
| f10GFx3DDRxPWR Local FRM220-10G card fiber D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.72 |
| f10GFx3DDTemp Local FRM220-10G card fiber D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.73 |
| f10GFx3DDPWRMargin Local FRM220-10G card fiber D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.270.20.1.74 |
| f10GBertLineTxMode Local 10G-SXX card BERTLine Tx Mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.75 |
| f10GBertLineTxPattern Local 10G-SXX card BERT Line Tx Pattern:
0:PRBS 7
1:PRBS 9
2:PRBS 23
3:PRBS 31
4:Pass-Through | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.76 |
| f10GBertLineTxPolarity Local 10G-SXX card BERT Line Tx Polarity:
0:Normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.77 |
| f10GBertLineRxMode Local 10G-SXX card BERT Line Rx Mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.78 |
| f10GBertLineRxPattern Local 10G-SXX card BERT Line Rx Pattern:
0:PRBS 7
1:PRBS 9
2:PRBS 23
3:PRBS 31 | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.79 |
| f10GDeviceActive Local FRM220-10G card active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.8 |
| f10GBertLineRxPolarity Local 10G-SXX card BERT Line Rx Polarity:
0:Normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.80 |
| f10GBertLineRxPatternStatus Local 10G-SXX card BERT Line Rx Pattern Status:
0:Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.81 |
| f10GBertLineRxErrorCounter Local 10G-SXX card BERT Line Rx Error Counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.82 |
| f10GBertLineClrErrorCounter Local 10G-SXX card BERT Line Clear Rx Error counter. | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.83 |
| f10GBertClientTxMode Local 10G-SXX card BERT Client Tx Mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.84 |
| f10GBertClientTxPattern Local 10G-SXX card BERT Client Tx Pattern:
0:PRBS 7
1:PRBS 9
2:PRBS 23
3:PRBS 31
4:Pass-Through | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.85 |
| f10GBertClientTxPolarity Local 10G-SXX card BERT Client Tx Polarity:
0:Normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.86 |
| f10GBertClientRxMode Local 10G-SXX card BERT Client Rx Mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.87 |
| f10GBertClientRxPattern Local 10G-SXX card BERT Client Rx Pattern:
0:PRBS 7
1:PRBS 9
2:PRBS 23
3:PRBS 31 | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.88 |
| f10GBertClientRxPolarity Local 10G-SXX card BERT Client Rx Polarity:
0:Normal
1:invert | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.89 |
| f10GFx1Link Local FRM220-10G card Fiber1 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.9 |
| f10GBertClientRxPatternStatus Local 10G-SXX card BERT Client Rx Pattern Status:
0:Loss
1:Sync | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.90 |
| f10GBertClientRxErrorCounter Local 10G-SXX card BERT Client Rx Error Counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.270.20.1.91 |
| f10GBertClientClrErrorCounter Local 10G-SXX card BERT Client Clear Rx Error counter. | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.92 |
| f10GXFP2WaveLengthStatus Local 10G-SXX card Tunable XFP2 Wavelength Status:
0:Normal
1:Abnormal | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.93 |
| f10GXFP3WaveLengthStatus Local 10G-SXX card Tunable XFP3 Wavelength Status:
0:Normal
1:Abnormal | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.94 |
| f10GXFP2TemperatureStatus Local 10G-SXX card Tunable XFP2 Temperature Status:
0:Normal
1:Abnormal | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.95 |
| f10GXFP3TemperatureStatus Local 10G-SXX card Tunable XFP3 Temperature Status:
0:Normal
1:Abnormal | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.96 |
| f10GXFP2TemperaturAlarm Local 10G-SXX card XFP2 temperature trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.97 |
| f10GXFP3TemperaturAlarm Local 10G-SXX card XFP3 temperature trap.
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.270.20.1.98 |
| f10GTunableXFP2Wavelength Set Tunable XFP2 Wavelength (ITU-T CH):
The channel is restricted to 20 ~ 61 | column | Integer32 | .1.3.6.1.4.1.4756.20.270.20.1.99 |