f100IUtpSpeedStatusLocal

CTC-FRM220-MIB · .1.3.6.1.4.1.4756.20.60.20.1.14
MIB view Table view

Object

column Enumeration 
Local FRM220-10/100I card UTP speed status:
0:10MHz
1:100MHz

Context

MIB
CTC-FRM220-MIB
OID
.1.3.6.1.4.1.4756.20.60.20.1.14
Type
column
Access
readonly
Status
current
Parent
f100ILocalEntry
Table
f100ILocalTable
Siblings
56

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f100IChassisIndexLocal
A unique value for each local card. It is the chassis location number.
columnInteger32.1.3.6.1.4.1.4756.20.60.20.1.1
f100IUtpRxActLocal
Local FRM220-10/100I card UTP receive active status: 0:Off 1:On
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.10
f100IUtpNegoLocal
Local FRM220-10/100I card UTP negotiation status: 0:Manual 1:Auto
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.11
f100IUtpSpeedLocal
Local FRM220-10/100I card UTP speed: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.12
f100IUtpDuplexLocal
Local FRM220-10/100I card UTP duplex: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.13
f100IUtpDuplexStatusLocal
Local FRM220-10/100I card UTP duplex status: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.15
f100IUtpRxByteLocal
Local FRM220-10/100I card UTP-in octet counter
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.16
f100IUtpTxByteLocal
Local FRM220-10/100I card UTP-out octet counter
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.17
f100IUtpFnlRxByteLocal
Local FRM220-10/100I card UTP-in final octets
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.18
f100IUtpFnlTxByteLocal
Local FRM220-10/100I card UTP-out final octets
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.19
f100ISlotIndexLocal
A unique value for each local card. It is the slot location number.
columnInteger32.1.3.6.1.4.1.4756.20.60.20.1.2
f100IFxLinkLocal
Local FRM220-10/100I card fiber link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.20
f100IFxRxActLocal
Local FRM220-10/100I card fiber receiver active status: 0:Off 1:On
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.21
f100IFxFEFLocal
Local FRM220-10/100I card fiber detected Far End Fault: 0:Off 1:Detected
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.22
f100IFxLBTestLocal
Force remote FRM220-10/100I card to do fiber LoopBack testing: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.23
f100IFxLBStatusLocal
Local FRM220-10/100I card fiber LoopBack testing status: 0:Off 1:Ok 2:Fail
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.24
f100IFxRemoPWRAbLocal
Local FRM220-10/100I card fiber Remote Power status: 0:Abnormal 1:OK
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.25
f100IIrlModeLocal
Local FRM220-10/100I card Ingress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.26
f100IIrlMultLocal
Local FRM220-10/100I card Ingress Rate Limit multiple: When the irlMode-L is n x 32K mode, the irlMult-L should be the value between 0 to 255; When the irlMode-L is n x 512K mode,…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.60.20.1.27
f100IErlModeLocal
Local FRM220-10/100I card Egress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.28
f100IErlMultLocal
Local FRM220-10/100I card Egress Rate Limit multiple: When the erlMode-L is n x 32K mode, the erlMult-L should be the value between 0 to 255; When the erlMode-L is n x 512K mode, …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.60.20.1.29
f100ICardHWVerLocal
Local FRM220-10/100I card hardware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.3
f100IFxRxByteLocal
Local FRM220-10/100I card FX-in octet counter
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.30
f100IFxTxByteLocal
Local FRM220-10/100I card FX-out octet counter
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.31
f100IFxFnlRxByteLocal
Local FRM220-10/100I card FX-in final octets
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.32
f100IFxFnlTxByteLocal
Local FRM220-10/100I card FX-out final octets
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.33
f100IPortResetLocal
Force local FRM220-10/100I card to reset mode: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.34
f100IClrCountersLocal
Force local FRM220-10/100I card to clear all counters: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.35
f100IOpModeLocal
Local FRM220-10/100I card operation mode: 0:Switch mode 1:Converter mode
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.36
f100ILfpModeLocal
Local FRM220-10/100I card Link Fault Pass-through mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.37
f100IAlsModeLocal
Local FRM220-10/100I card Auto Laser Shutdown mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.38
f100ISendFHRLocal
Local FRM220-10/100I card send Fiber Hardware Reset to remote: 0:No action 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.39
f100ICardFWVerLocal
Local FRM220-10/100I card firmware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.4
f100ISettoDefaultLocal
Local FRM220-10/100I card Set to default: 0:No action 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.40
f100IFxDDLocal
Local FRM220-10/100I card fiber Digital Diagnostic function: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.41
f100IDDVendorLocal
Local FRM220-10/100I card fiber D/D information: Vendor name
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.42
f100IDDPartNoLocal
Local FRM220-10/100I card fiber D/D information: Vendor part number
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.43
f100IDDFiberTypeLocal
Local FRM220-10/100I card fiber D/D information: Fiber Type
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.44
f100IDDWaveLenLocal
Local FRM220-10/100I card fiber D/D information: Wave length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.45
f100IDDWaveLen2Local
Local FRM220-10/100I card fiber D/D information: Wave length 2
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.46
f100IDDLinkLenLocal
Local FRM220-10/100I card fiber D/D information: Link length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.47
f100IDDLenUnitLocal
Local FRM220-10/100I card fiber D/D information: Length Unit
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.48
f100IDDStatusLocal
Local FRM220-10/100I card fiber D/D information: Status Support
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.49
f100ICardCPLDVerLocal
Local FRM220-10/100I card CPLD version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.5
f100IDDRxSensLocal
Local FRM220-10/100I card fiber D/D information: Rx Sensitivity
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.50
f100IDDTxPWRLocal
Local FRM220-10/100I card fiber D/D information: Tx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.51
f100IDDRxPWRLocal
Local FRM220-10/100I card fiber D/D information: Rx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.52
f100IDDTempLocal
Local FRM220-10/100I card fiber D/D information: Temperature in degree C
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.53
f100IDDPWRMarginLocal
Local FRM220-10/100I card fiber D/D information: Power margin
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.60.20.1.54
f100IDDPWRLossLocal
Local FRM220-10/100I card fiber D/D information: Power loss
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.60.20.1.55
f100IInfoR1SN1Local
Local FRM220-10/100I card INFORemoteOM S/N 1 information
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.56
f100IInfoR1SN2Local
Local FRM220-10/100I card INFORemoteOM S/N 2 information
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.57
f100ICardFPGAVerLocal
Local FRM220-10/100I card FPGA version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.60.20.1.6
f100IPortActiveLocal
Local FRM220-10/100I card active: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.7
f100IInBandManagLocal
Local FRM220-10/100I card manages remote: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.8
f100IUtpLinkLocal
Local FRM220-10/100I card UTP link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.60.20.1.9