f100ISIrlMultRemoteA
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.181.20.1.27
Object
RemoteA FRM220-10/100IS-2 card Ingress Rate Limit multiple: When the irlMode-L is n x 32K mode, the irlMult-L should be the value between 0 to 255; When the irlMode-L is n x 512K mode, the irlMult-L should be the value between 0 to 200.
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.181.20.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f100ISRemoteAEntry
- Table
- f100ISRemoteATable
- Siblings
- 54
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f100ISChassisIndexRemoteA A unique value for each local card.
It is the chassis location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.181.20.1.1 |
| f100ISUtpRxActRemoteA RemoteA FRM220-10/100IS-2 card UTP3 receive active status:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.10 |
| f100ISUtpNegoRemoteA RemoteA FRM220-10/100IS-2 card UTP3 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.11 |
| f100ISUtpSpeedRemoteA RemoteA FRM220-10/100IS-2 card UTP3 speed Setting:
0:10MHz
1:100MHz | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.12 |
| f100ISUtpDuplexRemoteA RemoteA FRM220-10/100IS-2 card UTP3 duplex Setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.13 |
| f100ISUtpSpeedStatusRemoteA RemoteA FRM220-10/100IS-2 card UTP3 speed Status:
0:10MHz
1:100MHz | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.14 |
| f100ISUtpDuplexStatusRemoteA RemoteA FRM220-10/100IS-2 card UTP3 duplex Status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.15 |
| f100ISUtpRxByteRemoteA RemoteA FRM220-10/100IS-2 card UTP3-in octet counter | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.16 |
| f100ISUtpTxByteRemoteA RemoteA FRM220-10/100IS-2 card UTP3-out octet counter | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.17 |
| f100ISUtpFnlRxByteRemoteA RemoteA FRM220-10/100IS-2 card UTP3-in final octets | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.18 |
| f100ISUtpFnlTxByteRemoteA RemoteA FRM220-10/100IS-2 card UTP3-out final octets | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.19 |
| f100ISSlotIndexRemoteA A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.181.20.1.2 |
| f100ISFxLinkRemoteA RemoteA FRM220-10/100IS-2 card fiber1 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.20 |
| f100ISFxRxActRemoteA RemoteA FRM220-10/100IS-2 card fiber1 receiver active status:
0:Off
1:On | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.21 |
| f100ISFxFEFRemoteA RemoteA FRM220-10/100IS-2 card fiber1 detected Far End Fault:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.22 |
| f100ISFxLBTestRemoteA Force remote FRM220-10/100IS-2 card to do fiber1 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.23 |
| f100ISFxLBStatusRemoteA RemoteA FRM220-10/100IS-2 card fiber1 LoopBack testing status:
0:Off
1:Ok
2:Fail | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.24 |
| f100ISRemoPWRAbRemoteA RemoteA FRM220-10/100IS-2 card fiber1 RemoteA Power status:
0:Abnormal
1:OK | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.25 |
| f100ISIrlModeRemoteA RemoteA FRM220-10/100IS-2 card Ingress Rate Limit mode:
0:No limit
1:n x 32K
2:n x 512K | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.26 |
| f100ISErlModeRemoteA RemoteA FRM220-10/100IS-2 card Egress Rate Limit mode:
0:No limit
1:n x 32K
2:n x 512K | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.28 |
| f100ISErlMultRemoteA RemoteA FRM220-10/100IS-2 card Egress Rate Limit multiple:
When the erlMode-L is n x 32K mode, the erlMult-L
should be the value between 0 to 255;
When the erlMode-L is n x 512K… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.181.20.1.29 |
| f100ISCardHWVerRemoteA RemoteA FRM220-10/100I card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.3 |
| f100ISRxByteRemoteA RemoteA FRM220-10/100IS-2 card FX1-in octet counter | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.30 |
| f100ISTxByteRemoteA RemoteA FRM220-10/100IS-2 card FX1-out octet counter | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.31 |
| f100ISFnlRxByteRemoteA RemoteA FRM220-10/100IS-2 card FX1-in final octets | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.32 |
| f100ISFnlTxByteRemoteA RemoteA FRM220-10/100IS-2 card FX1-out final octets | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.33 |
| f100ISPortResetRemoteA Force local FRM220-10/100IS-2 card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.34 |
| f100ISOpModeRemoteA RemoteA FRM220-10/100IS-2 card operation mode:
0:Switch mode
1:Converter mode | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.35 |
| f100ISLfpModeRemoteA RemoteA FRM220-10/100IS-2 card Link Fault Pass-through mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.36 |
| f100ISAlsModeRemoteA RemoteA FRM220-10/100IS-2 card Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.37 |
| f100ISFhrModeRemoteA RemoteA FRM220-10/100IS-2 card accept fiber hardware reset mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.38 |
| f100ISDDRemoteA RemoteA FRM220-10/100IS-2 card fiber1 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.39 |
| f100ISCardFWVerRemoteA RemoteA FRM220-10/100I card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.4 |
| f100ISDDVendorRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.40 |
| f100ISDDPartNoRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.41 |
| f100ISDDFiberTypeRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.42 |
| f100ISDDWaveLenRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.43 |
| f100ISDDWaveLen2RemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.44 |
| f100ISDDLinkLenRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.45 |
| f100ISDDLenUnitRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.46 |
| f100ISDDStatusRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.47 |
| f100ISDDRxSensRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.48 |
| f100ISDDTxPWRRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.49 |
| f100ISCardCPLDVerRemoteA RemoteA FRM220-10/100I card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.5 |
| f100ISDDRxPWRRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.50 |
| f100ISDDTempRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.51 |
| f100ISDDPWRMarginRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.181.20.1.52 |
| f100ISDDPWRLossRemoteA RemoteA FRM220-10/100IS-2 card fiber1 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.181.20.1.53 |
| f100ISInfoR1SN1RemoteA RemoteA FRM220-10/100IS-2 card INFOROM S/N 1 information | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.54 |
| f100ISInfoR1SN2RemoteA RemoteA FRM220-10/100IS-2 card INFOROM S/N 2 information | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.55 |
| f100ISCardFPGAVerRemoteA RemoteA FRM220-10/100I card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.181.20.1.6 |
| f100ISPortActiveRemoteA RemoteA FRM220-10/100IS-2 card FX1 active:
0:Inactive
1:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.7 |
| f100ISInBandManagRemoteA RemoteA FRM220-10/100IS-2 card manages remote:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.8 |
| f100ISUtpLinkRemoteA RemoteA FRM220-10/100IS-2 card UTP3 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.181.20.1.9 |