f100I2EIrl1MultRemote

CTC-FRM220-MIB · .1.3.6.1.4.1.4756.20.281.20.1.28
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
Remote FRM220-10/100I-2E card UTP 1 Ingress Rate Limit multiple:
When the irlMode-L is n x 32K mode, the irlMult-L
should be the value between 0 to 255;
When the irlMode-L is n x 512K mode, the irlMult-L 
should be the value between 0 to 200.

Context

MIB
CTC-FRM220-MIB
OID
.1.3.6.1.4.1.4756.20.281.20.1.28
Type
column
Access
readwrite
Status
current
Parent
f100I2ERemoteEntry
Table
f100I2ERemoteTable
Siblings
52

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f100I2EChassisIndexRemote
A unique value for each local card. It is the chassis location number.
columnInteger32.1.3.6.1.4.1.4756.20.281.20.1.1
f100I2EFxLinkRemote
Remote FRM220-10/100I-2E card fiber link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.10
f100I2EFxFEFRemote
Remote FRM220-10/100I-2E card fiber detected Far End Fault: 0:Off 1:Detected
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.11
f100I2EFxRemoPWRAbRemote
Remote FRM220-10/100I-2E card fiber Remote Power status: 0:Abnormal 1:OK
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.12
f100I2EUtp1LinkRemote
Remote FRM220-10/100I-2E card UTP 1 link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.13
f100I2EUtp1NegoRemote
Remote FRM220-10/100I-2E card UTP 1 negotiation status: 0:Manual 1:Auto
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.14
f100I2EUtp1SpeedRemote
Remote FRM220-10/100I-2E card UTP 1 speed: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.15
f100I2EUtp1DuplexRemote
Remote FRM220-10/100I-2E card UTP 1 duplex: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.16
f100I2EUtp1SpeedStatusRemote
Remote FRM220-10/100I-2E card UTP 1 speed status: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.17
f100I2EUtp1DuplexStatusRemote
Remote FRM220-10/100I-2E card UTP 1 duplex status: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.18
f100I2EUtp1VIDNumberRemote
Remote FRM220-10/100I-2E card UTP 1 VID number (1~4094)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.19
f100I2ESlotIndexRemote
A unique value for each local card. It is the slot location number.
columnInteger32.1.3.6.1.4.1.4756.20.281.20.1.2
f100I2EUtp2LinkRemote
Remote FRM220-10/100I-2E card UTP 2 link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.20
f100I2EUtp2NegoRemote
Remote FRM220-10/100I-2E card UTP 2 negotiation status: 0:Manual 1:Auto
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.21
f100I2EUtp2SpeedRemote
Remote FRM220-10/100I-2E card UTP 2 speed: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.22
f100I2EUtp2DuplexRemote
Remote FRM220-10/100I-2E card UTP 2 duplex: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.23
f100I2EUtp2SpeedStatusRemote
Remote FRM220-10/100I-2E card UTP 2 speed status: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.24
f100I2EUtp2DuplexStatusRemote
Remote FRM220-10/100I-2E card UTP 2 duplex status: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.25
f100I2EUtp2VIDNumberRemote
Remote FRM220-10/100I-2E card UTP 2 VID number (1~4094)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.26
f100I2EIrl1ModeRemote
Remote FRM220-10/100I-2E card UTP 1 Ingress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.27
f100I2EErl1ModeRemote
Remote FRM220-10/100I-2E card UTP 1 Egress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.29
f100I2ECardHWVerRemote
Remote FRM220-10/100I-2E card hardware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.3
f100I2EErl1MultRemote
Remote FRM220-10/100I-2E card UTP 1 Egress Rate Limit multiple: When the erlMode-L is n x 32K mode, the erlMult-L should be the value between 0 to 255; When the erlMode-L is n x 5…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.30
f100I2EIrl2ModeRemote
Remote FRM220-10/100I-2E card UTP 2 Ingress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.31
f100I2EIrl2MultRemote
Remote FRM220-10/100I-2E card UTP 2 Ingress Rate Limit multiple: When the irlMode-L is n x 32K mode, the irlMult-L should be the value between 0 to 255; When the irlMode-L is n x …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.32
f100I2EErl2ModeRemote
Remote FRM220-10/100I-2E card UTP 2 Egress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.33
f100I2EErl2MultRemote
Remote FRM220-10/100I-2E card UTP 2 Egress Rate Limit multiple: When the erlMode-L is n x 32K mode, the erlMult-L should be the value between 0 to 255; When the erlMode-L is n x 5…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.34
f100I2EOpModeRemote
Remote FRM220-10/100I-2E card operation mode: 0:Switch mode 1:Tag based VLAN mode
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.35
f100I2ELfpModeRemote
Remote FRM220-10/100I-2E card Link Fault Pass-through mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.36
f100I2EAlsModeRemote
Remote FRM220-10/100I-2E card Auto Laser Shutdown mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.37
f100I2EFhrModeRemote
Remote 10/100I-2E card accepts Fiber Hardware Reset mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.38
f100I2EFxDDRemote
Remote FRM220-10/100I-2E card fiber Digital Diagnostic function: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.39
f100I2ECardFWVerRemote
Remote FRM220-10/100I-2E card firmware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.4
f100I2EDDVendorRemote
Remote FRM220-10/100I-2E card fiber D/D information: Vendor name
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.40
f100I2EDDPartNoRemote
Remote FRM220-10/100I-2E card fiber D/D information: Vendor part number
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.41
f100I2EDDFiberTypeRemote
Remote FRM220-10/100I-2E card fiber D/D information: Fiber Type
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.42
f100I2EDDWaveLenRemote
Remote FRM220-10/100I-2E card fiber D/D information: Wave length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.43
f100I2EDDWaveLen2Remote
Remote FRM220-10/100I-2E card fiber D/D information: Wave length 2
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.44
f100I2EDDLinkLenRemote
Remote FRM220-10/100I-2E card fiber D/D information: Link length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.45
f100I2EDDLenUnitRemote
Remote FRM220-10/100I-2E card fiber D/D information: Length Unit
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.46
f100I2EDDStatusRemote
Remote FRM220-10/100I-2E card fiber D/D information: Status Support
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.47
f100I2EDDRxSensRemote
Remote FRM220-10/100I-2E card fiber D/D information: Rx Sensitivity
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.48
f100I2EDDTxPWRRemote
Remote FRM220-10/100I-2E card fiber D/D information: Tx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.49
f100I2ECardCPLDVerRemote
Remote FRM220-10/100I-2E card CPLD version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.5
f100I2EDDRxPWRRemote
Remote FRM220-10/100I-2E card fiber D/D information: Rx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.50
f100I2EDDTempRemote
Remote FRM220-10/100I-2E card fiber D/D information: Temperature in degree C
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.51
f100I2EDDPWRMarginRemote
Remote FRM220-10/100I-2E card fiber D/D information: Power margin
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.52
f100I2EDDPWRLossRemote
Remote FRM220-10/100I-2E card fiber D/D information: Power loss
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.281.20.1.53
f100I2ECardFPGAVerRemote
Remote FRM220-10/100I-2E card FPGA version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.281.20.1.6
f100I2EPortActiveRemote
Remote FRM220-10/100I-2E card active: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.7
f100I2EPortResetRemote
Force local FRM220-10/100I-2E card to reset mode: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.8
f100I2ESettoDefaultRemote
Remote FRM220-10/100I-2E card Set to default: 0:No action 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.281.20.1.9