f100I2EDDWaveLen2Local

CTC-FRM220-MIB · .1.3.6.1.4.1.4756.20.280.20.1.45
MIB view Table view

Object

column SNMPv2-TCDisplayString 
Local FRM220-10/100I-2E card fiber D/D information:
Wave length 2

Context

MIB
CTC-FRM220-MIB
OID
.1.3.6.1.4.1.4756.20.280.20.1.45
Type
column
Access
readonly
Status
current
Parent
f100I2ELocalEntry
Table
f100I2ELocalTable
Siblings
53

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f100I2EChassisIndexLocal
A unique value for each local card. It is the chassis location number.
columnInteger32.1.3.6.1.4.1.4756.20.280.20.1.1
f100I2EFxLinkLocal
Local FRM220-10/100I-2E card fiber link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.10
f100I2EFxFEFLocal
Local FRM220-10/100I-2E card fiber detected Far End Fault: 0:Off 1:Detected
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.11
f100I2EFxRemoPWRAbLocal
Local FRM220-10/100I-2E card fiber Remote Power status: 0:Abnormal 1:OK
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.12
f100I2EInBandManagLocal
Local FRM220-10/100I-2E card manages remote: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.13
f100I2EUtp1LinkLocal
Local FRM220-10/100I-2E card UTP 1 link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.14
f100I2EUtp1NegoLocal
Local FRM220-10/100I-2E card UTP 1 negotiation status: 0:Manual 1:Auto
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.15
f100I2EUtp1SpeedLocal
Local FRM220-10/100I-2E card UTP 1 speed: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.16
f100I2EUtp1DuplexLocal
Local FRM220-10/100I-2E card UTP 1 duplex: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.17
f100I2EUtp1SpeedStatusLocal
Local FRM220-10/100I-2E card UTP 1 speed status: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.18
f100I2EUtp1DuplexStatusLocal
Local FRM220-10/100I-2E card UTP 1 duplex status: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.19
f100I2ESlotIndexLocal
A unique value for each local card. It is the slot location number.
columnInteger32.1.3.6.1.4.1.4756.20.280.20.1.2
f100I2EUtp1VIDNumberLocal
Local FRM220-10/100I-2E card UTP 1 VID number (1~4094)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.20
f100I2EUtp2LinkLocal
Local FRM220-10/100I-2E card UTP 2 link status: 0:Down 1:Up
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.21
f100I2EUtp2NegoLocal
Local FRM220-10/100I-2E card UTP 2 negotiation status: 0:Manual 1:Auto
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.22
f100I2EUtp2SpeedLocal
Local FRM220-10/100I-2E card UTP 2 speed: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.23
f100I2EUtp2DuplexLocal
Local FRM220-10/100I-2E card UTP 2 duplex: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.24
f100I2EUtp2SpeedStatusLocal
Local FRM220-10/100I-2E card UTP 2 speed status: 0:10MHz 1:100MHz
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.25
f100I2EUtp2DuplexStatusLocal
Local FRM220-10/100I-2E card UTP 2 duplex status: 0:Half duplex mode 1:Full duplex mode
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.26
f100I2EUtp2VIDNumberLocal
Local FRM220-10/100I-2E card UTP 2 VID number (1~4094)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.27
f100I2EIrl1ModeLocal
Local FRM220-10/100I-2E card UTP 1 Ingress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.28
f100I2EIrl1MultLocal
Local FRM220-10/100I-2E card UTP 1 Ingress Rate Limit multiple: When the irlMode-L is n x 32K mode, the irlMult-L should be the value between 0 to 255; When the irlMode-L is n x 5…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.29
f100I2ECardHWVerLocal
Local FRM220-10/100I-2E card hardware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.3
f100I2EErl1ModeLocal
Local FRM220-10/100I-2E card UTP 1 Egress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.30
f100I2EErl1MultLocal
Local FRM220-10/100I-2E card UTP 1 Egress Rate Limit multiple: When the erlMode-L is n x 32K mode, the erlMult-L should be the value between 0 to 255; When the erlMode-L is n x 51…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.31
f100I2EIrl2ModeLocal
Local FRM220-10/100I-2E card UTP 2 Ingress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.32
f100I2EIrl2MultLocal
Local FRM220-10/100I-2E card UTP 2 Ingress Rate Limit multiple: When the irlMode-L is n x 32K mode, the irlMult-L should be the value between 0 to 255; When the irlMode-L is n x 5…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.33
f100I2EErl2ModeLocal
Local FRM220-10/100I-2E card UTP 2 Egress Rate Limit mode: 0:No limit 1:n x 32K 2:n x 512K
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.34
f100I2EErl2MultLocal
Local FRM220-10/100I-2E card UTP 2 Egress Rate Limit multiple: When the erlMode-L is n x 32K mode, the erlMult-L should be the value between 0 to 255; When the erlMode-L is n x 51…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.35
f100I2EOpModeLocal
Local FRM220-10/100I-2E card operation mode: 0:Switch mode 1:Tag based VLAN mode
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.36
f100I2ELfpModeLocal
Local FRM220-10/100I-2E card Link Fault Pass-through mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.37
f100I2EAlsModeLocal
Local FRM220-10/100I-2E card Auto Laser Shutdown mode: 0:Disable 1:Enable
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.38
f100I2ESendFHRLocal
Local FRM220-10/100I-2E card send Fiber Hardware Reset to remote: 0:No action 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.39
f100I2ECardFWVerLocal
Local FRM220-10/100I-2E card firmware version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.4
f100I2EFxDDLocal
Local FRM220-10/100I-2E card fiber Digital Diagnostic function: 0:No 1:Yes
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.40
f100I2EDDVendorLocal
Local FRM220-10/100I-2E card fiber D/D information: Vendor name
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.41
f100I2EDDPartNoLocal
Local FRM220-10/100I-2E card fiber D/D information: Vendor part number
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.42
f100I2EDDFiberTypeLocal
Local FRM220-10/100I-2E card fiber D/D information: Fiber Type
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.43
f100I2EDDWaveLenLocal
Local FRM220-10/100I-2E card fiber D/D information: Wave length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.44
f100I2EDDLinkLenLocal
Local FRM220-10/100I-2E card fiber D/D information: Link length
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.46
f100I2EDDLenUnitLocal
Local FRM220-10/100I-2E card fiber D/D information: Length Unit
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.47
f100I2EDDStatusLocal
Local FRM220-10/100I-2E card fiber D/D information: Status Support
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.48
f100I2EDDRxSensLocal
Local FRM220-10/100I-2E card fiber D/D information: Rx Sensitivity
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.49
f100I2ECardCPLDVerLocal
Local FRM220-10/100I-2E card CPLD version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.5
f100I2EDDTxPWRLocal
Local FRM220-10/100I-2E card fiber D/D information: Tx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.50
f100I2EDDRxPWRLocal
Local FRM220-10/100I-2E card fiber D/D information: Rx power
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.51
f100I2EDDTempLocal
Local FRM220-10/100I-2E card fiber D/D information: Temperature in degree C
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.52
f100I2EDDPWRMarginLocal
Local FRM220-10/100I-2E card fiber D/D information: Power margin
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.53
f100I2EDDPWRLossLocal
Local FRM220-10/100I-2E card fiber D/D information: Power loss
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4756.20.280.20.1.54
f100I2ECardFPGAVerLocal
Local FRM220-10/100I-2E card FPGA version x.xxx
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4756.20.280.20.1.6
f100I2EPortActiveLocal
Local FRM220-10/100I-2E card active: 0:Inactive 1:Active
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.7
f100I2EPortResetLocal
Force local FRM220-10/100I-2E card to reset mode: 0:Off 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.8
f100I2ESettoDefaultLocal
Local FRM220-10/100I-2E card Set to default: 0:No action 1:Action
columnEnumeration.1.3.6.1.4.1.4756.20.280.20.1.9