f1002ESFiber1LLFDepPort2
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.330.40.1.42
Object
column
r/w
Enumeration
device card port 1 Link Loss Forwarding depends on port 2 Fiber Rx link: 0:don't care 1:selected
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.330.40.1.42- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f1002ESEntry
- Table
- f1002ESTable
- Siblings
- 193
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f1002ESChassisIndex A unique value for each chassis ID.
For CH20, it is the chassis ID.
For CH08, it is always 0. | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.1 |
| f1002ESFiber1EgressRate device card fiber 1 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.10 |
| f1002ESUtp3VLAN device UTP 3 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.100 |
| f1002ESUtp4VLAN device UTP 4 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.101 |
| f1002ESPortVLAN device Port VLAN mode :
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.102 |
| f1002ES8021QVLAN device 802.1Q VLAN :
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.103 |
| f1002ESFlowCrl device Flow Control :
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.104 |
| f1002ESTagType device Tag Type (HEX) : | column | OctetString | .1.3.6.1.4.1.4756.20.330.40.1.105 |
| f1002ESPort1VID device Port 1 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.106 |
| f1002ESPort2VID device Port 2 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.107 |
| f1002ESPort3VID device Port 3 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.108 |
| f1002ESPort4VID device Port 4 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.109 |
| f1002ESFiber2Link device card fiber port 2 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.11 |
| f1002ESPort1QinQ device Port 1 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.110 |
| f1002ESPort2QinQ device Port 2 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.111 |
| f1002ESPort3QinQ device Port 3 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.112 |
| f1002ESPort4QinQ device Port 4 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.113 |
| f1002ESVID1 device VID 1: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.114 |
| f1002ESVID2 device VID 2: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.115 |
| f1002ESVID3 device VID 3: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.116 |
| f1002ESVID4 device VID 4: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.117 |
| f1002ESVID5 device VID 5: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.118 |
| f1002ESVID6 device VID 6: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.119 |
| f1002ESFiber2LBTest Force remote device card to do fiber port 2 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.12 |
| f1002ESVID7 device VID 7: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.120 |
| f1002ESVID8 device VID 8: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.121 |
| f1002ESVID9 device VID 9: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.122 |
| f1002ESVID10 device VID 10: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.123 |
| f1002ESVID11 device VID 11: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.124 |
| f1002ESVID12 device VID 12: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.125 |
| f1002ESVID13 device VID 13: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.126 |
| f1002ESVID14 device VID 14: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.127 |
| f1002ESVID15 device VID 15: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.128 |
| f1002ESVID16 device VID 16: | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.129 |
| f1002ESFiber2IngressRate device card fiber 2 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.13 |
| f1002ESPort1Member1 device card port 1 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.130 |
| f1002ESPort1Member2 device card port 1 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.131 |
| f1002ESPort1Member3 device card port 1 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.132 |
| f1002ESPort1Member4 device card port 1 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.133 |
| f1002ESPort1Member5 device card port 1 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.134 |
| f1002ESPort1Member6 device card port 1 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.135 |
| f1002ESPort1Member7 device card port 1 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.136 |
| f1002ESPort1Member8 device card port 1 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.137 |
| f1002ESPort1Member9 device card port 1 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.138 |
| f1002ESPort1Member10 device card port 1 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.139 |
| f1002ESFiber2EgressRate device card fiber 2 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.14 |
| f1002ESPort1Member11 device card port 1 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.140 |
| f1002ESPort1Member12 device card port 1 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.141 |
| f1002ESPort1Member13 device card port 1 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.142 |
| f1002ESPort1Member14 device card port 1 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.143 |
| f1002ESPort1Member15 device card port 1 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.144 |
| f1002ESPort1Member16 device card port 1 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.145 |
| f1002ESPort2Member1 device card port 2 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.146 |
| f1002ESPort2Member2 device card port 2 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.147 |
| f1002ESPort2Member3 device card port 2 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.148 |
| f1002ESPort2Member4 device card port 2 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.149 |
| f1002ESUtp3Link device card UTP port 3 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.15 |
| f1002ESPort2Member5 device card port 2 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.150 |
| f1002ESPort2Member6 device card port 2 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.151 |
| f1002ESPort2Member7 device card port 2 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.152 |
| f1002ESPort2Member8 device card port 2 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.153 |
| f1002ESPort2Member9 device card port 2 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.154 |
| f1002ESPort2Member10 device card port 2 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.155 |
| f1002ESPort2Member11 device card port 2 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.156 |
| f1002ESPort2Member12 device card port 2 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.157 |
| f1002ESPort2Member13 device card port 2 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.158 |
| f1002ESPort2Member14 device card port 2 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.159 |
| f1002ESUtp3Nego device card UTP port 3 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.16 |
| f1002ESPort2Member15 device card port 2 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.160 |
| f1002ESPort2Member16 device card port 2 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.161 |
| f1002ESPort3Member1 device card port 3 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.162 |
| f1002ESPort3Member2 device card port 3 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.163 |
| f1002ESPort3Member3 device card port 3 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.164 |
| f1002ESPort3Member4 device card port 3 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.165 |
| f1002ESPort3Member5 device card port 3 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.166 |
| f1002ESPort3Member6 device card port 3 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.167 |
| f1002ESPort3Member7 device card port 3 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.168 |
| f1002ESPort3Member8 device card port 3 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.169 |
| f1002ESUtp3Speed device card UTP port 3 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.17 |
| f1002ESPort3Member9 device card port 3 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.170 |
| f1002ESPort3Member10 device card port 3 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.171 |
| f1002ESPort3Member11 device card port 3 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.172 |
| f1002ESPort3Member12 device card port 3 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.173 |
| f1002ESPort3Member13 device card port 3 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.174 |
| f1002ESPort3Member14 device card port 3 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.175 |
| f1002ESPort3Member15 device card port 3 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.176 |
| f1002ESPort3Member16 device card port 3 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.177 |
| f1002ESPort4Member1 device card port 4 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.178 |
| f1002ESPort4Member2 device card port 4 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.179 |
| f1002ESUtp3Duplex device card UTP port 3 duplex setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.18 |
| f1002ESPort4Member3 device card port 4 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.180 |
| f1002ESPort4Member4 device card port 4 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.181 |
| f1002ESPort4Member5 device card port 4 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.182 |
| f1002ESPort4Member6 device card port 4 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.183 |
| f1002ESPort4Member7 device card port 4 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.184 |
| f1002ESPort4Member8 device card port 4 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.185 |
| f1002ESPort4Member9 device card port 4 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.186 |
| f1002ESPort4Member10 device card port 4 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.187 |
| f1002ESPort4Member11 device card port 4 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.188 |
| f1002ESPort4Member12 device card port 4 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.189 |
| f1002ESUtp3SpeedStatus device card UTP port 3 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.19 |
| f1002ESPort4Member13 device card port 4 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.190 |
| f1002ESPort4Member14 device card port 4 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.191 |
| f1002ESPort4Member15 device card port 4 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.192 |
| f1002ESPort4Member16 device card port 4 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.193 |
| f1002ESSetToDefault device card set to default:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.194 |
| f1002ESSlotIndex A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.330.40.1.2 |
| f1002ESUtp3DuplexStatus device card UTP port 3 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.20 |
| f1002ESUtp3IngressRate device card utp 3 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.21 |
| f1002ESUtp3EgressRate device card utp 3 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K ~… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.22 |
| f1002ESUtp3LBTest Force remote device card to do utp port 3 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.23 |
| f1002ESUtp4Link device card UTP port 4 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.24 |
| f1002ESUtp4Nego device card UTP port 4 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.25 |
| f1002ESUtp4Speed device card UTP port 4 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.26 |
| f1002ESUtp4Duplex device card UTP port 4 duplex setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.27 |
| f1002ESUtp4SpeedStatus device card UTP port 4 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.28 |
| f1002ESUtp4DuplexStatus device card UTP port 4 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.29 |
| f1002ESCardHWVer device card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.3 |
| f1002ESUtp4IngressRate device card utp 4 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.30 |
| f1002ESUtp4EgressRate device card utp 4 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64K ~… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.31 |
| f1002ESUtp4LBTest Force remote device card to do utp port 4 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.32 |
| f1002ESDeviceActive device card active mode:
(It is read-only in local device.)
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.33 |
| f1002ESDeviceReset Force local device card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.34 |
| f1002ESFiber1Active device fiber port 1 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.35 |
| f1002ESFiber2Active device fiber port 2 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.36 |
| f1002ESUtp3Active device UTP port 3 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.37 |
| f1002ESUtp4Active device UTP port 4 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.38 |
| f1002ESFiber1Als device card port 1 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.39 |
| f1002ESCardFWVer device card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.4 |
| f1002ESFiber2Als device card port 2 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.40 |
| f1002ESFiber1LLFDepLogi device card port 1 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.41 |
| f1002ESFiber1LLFDepPort3 device card port 1 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.43 |
| f1002ESFiber1LLFDepPort4 device card port 1 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.44 |
| f1002ESFiber2LLFDepLogi device card port 2 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.45 |
| f1002ESFiber2LLFDepPort1 device card port 2 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.46 |
| f1002ESFiber2LLFDepPort3 device card port 2 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.47 |
| f1002ESFiber2LLFDepPort4 device card port 2 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.48 |
| f1002ESUtp3LLFDepLogi device card port 3 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.49 |
| f1002ESCardCPLDVer device card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.5 |
| f1002ESUtp3LLFDepPort1 device card port 3 Link Loss Forwarding
depends on port 1 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.50 |
| f1002ESUtp3LLFDepPort2 device card port 3 Link Loss Forwarding
depends on port 2 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.51 |
| f1002ESUtp3LLFDepPort4 device card port 3 Link Loss Forwarding
depends on port 4 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.52 |
| f1002ESUtp4LLFDepLogi device card port 4 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.53 |
| f1002ESUtp4LLFDepPort1 device card port 4 Link Loss Forwarding
depends on port 1 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.54 |
| f1002ESUtp4LLFDepPort2 device card port 4 Link Loss Forwarding
depends on port 2 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.55 |
| f1002ESUtp4LLFDepPort3 device card port 4 Link Loss Forwarding
depends on port 3 Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.56 |
| f1002ESFiber1DD device card fiber port 1 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.57 |
| f1002ESFiber1DDVendor device card fiber port 1 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.58 |
| f1002ESFiber1DDPartNo device card fiber port 1 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.59 |
| f1002ESCardFPGAVer device card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.6 |
| f1002ESFiber1DDFiberType device card fiber port 1 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.60 |
| f1002ESFiber1DDWaveLen device card fiber port 1 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.61 |
| f1002ESFiber1DDWaveLen2 device card fiber port 1 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.62 |
| f1002ESFiber1DDLinkLen device card fiber port 1 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.63 |
| f1002ESFiber1DDLenUnit device card fiber port 1 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.64 |
| f1002ESFiber1DDStatus device card fiber port 1 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.65 |
| f1002ESFiber1DDRxSens device card fiber port 1 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.66 |
| f1002ESFiber1DDTxPWR device card fiber port 1 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.67 |
| f1002ESFiber1DDRxPWR device card fiber port 1 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.68 |
| f1002ESFiber1DDTemp device card fiber port 1 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.69 |
| f1002ESFiber1Link device card fiber port 1 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.7 |
| f1002ESFiber1DDPWRMargin device card fiber port 1 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.330.40.1.70 |
| f1002ESFiber1DDPWRLoss device card fiber port 1 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.330.40.1.71 |
| f1002ESFiber2DD device card fiber port 2 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.72 |
| f1002ESFiber2DDVendor device card fiber port 2 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.73 |
| f1002ESFiber2DDPartNo device card fiber port 2 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.74 |
| f1002ESFiber2DDFiberType device card fiber port 2 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.75 |
| f1002ESFiber2DDWaveLen device card fiber port 2 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.76 |
| f1002ESFiber2DDWaveLen2 device card fiber port 2 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.77 |
| f1002ESFiber2DDLinkLen device card fiber port 2 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.78 |
| f1002ESFiber2DDLenUnit device card fiber port 2 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.79 |
| f1002ESFiber1LBTest Force remote device card to do fiber port 1 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.8 |
| f1002ESFiber2DDStatus device card fiber port 2 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.80 |
| f1002ESFiber2DDRxSens device card fiber port 2 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.81 |
| f1002ESFiber2DDTxPWR device card fiber port 2 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.82 |
| f1002ESFiber2DDRxPWR device card fiber port 2 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.83 |
| f1002ESFiber2DDTemp device card fiber port 2 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.84 |
| f1002ESFiber2DDPWRMargin device card fiber port 2 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.330.40.1.85 |
| f1002ESFiber2DDPWRLoss device card fiber port 2 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.330.40.1.86 |
| f1002ESClrRMONCnts Clear local device card RMON IN/OUT counters:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.87 |
| f1002ESFiber1RMONIn device card port 1 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.88 |
| f1002ESFiber1RMONOut device card port 1 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.89 |
| f1002ESFiber1IngressRate device card fiber 1 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate : 64… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.9 |
| f1002ESFiber2RMONIn device card port 2 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.90 |
| f1002ESFiber2RMONOut device card port 2 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.91 |
| f1002ESUtp3RMONIn device card port 3 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.92 |
| f1002ESUtp3RMONOut device card port 3 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.93 |
| f1002ESUtp4RMONIn device card port 4 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.94 |
| f1002ESUtp4RMONOut device card port 4 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.330.40.1.95 |
| f1002ESFiber1Speed device Fiber 1 speed :
0:1000
1:100 | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.96 |
| f1002ESFiber2Speed device Fiber 2 speed :
0:1000
1:100 | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.97 |
| f1002ESFiber1VLAN device Fiber 1 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.98 |
| f1002ESFiber2VLAN device Fiber 2 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.330.40.1.99 |