f1000EASXUtp4LLFDepPort1Local
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.300.40.1.64
Object
column
r/w
Enumeration
Local device card port 4 Link Loss Forwarding depends on port 1 Fiber Rx link: 0:don't care 1:selected
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.300.40.1.64- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f1000EASXLocalEntry
- Table
- f1000EASXLocalTable
- Siblings
- 362
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f1000EASXChassisIndexLocal A unique value for each chassis ID.
For CH20, it is the chassis ID.
For CH08, it is always 0. | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.1 |
| f1000EASXFiber1LBTestLocal Force remote device card to do fiber port 1 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.10 |
| f1000EASXFiber2DDStatusLocal Local device card fiber port 2 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.100 |
| f1000EASXFiber2DDRxSensLocal Local device card fiber port 2 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.101 |
| f1000EASXFiber2DDTxPWRLocal Local device card fiber port 2 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.102 |
| f1000EASXFiber2DDRxPWRLocal Local device card fiber port 2 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.103 |
| f1000EASXFiber2DDTempLocal Local device card fiber port 2 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.104 |
| f1000EASXFiber2DDPWRMarginLocal Local device card fiber port 2 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.300.40.1.105 |
| f1000EASXFiber2DDPWRLossLocal Local device card fiber port 2 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.300.40.1.106 |
| f1000EASXClrRMONCntsLocal Clear local device card RMON IN/OUT counters:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.107 |
| f1000EASXFiber1RMONInLocal Local device card port 1 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.108 |
| f1000EASXFiber1RMONOutLocal Local device card port 1 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.109 |
| f1000EASXFiber1OAMRLBStatusLocal Remote device card fiber port 1 LoopBack testing status:
0:Off
1:Ok
2:Fail | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.11 |
| f1000EASXFiber2RMONInLocal Local device card port 2 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.110 |
| f1000EASXFiber2RMONOutLocal Local device card port 2 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.111 |
| f1000EASXUtp3RMONInLocal Local device card port 3 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.112 |
| f1000EASXUtp3RMONOutLocal Local device card port 3 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.113 |
| f1000EASXUtp4RMONInLocal Local device card port 4 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.114 |
| f1000EASXUtp4RMONOutLocal Local device card port 4 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.115 |
| f1000EASXClrOAMCntsLocal Clear local device card OAM counters:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.116 |
| f1000EASXIpModeLocal On Rack Ip Mode:
0:Enable
1:Disable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.117 |
| f1000EASXOamChATxLocal Local device OAM Channel A TX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.118 |
| f1000EASXOamChARxLocal Local device OAM Channel A RX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.119 |
| f1000EASXFiber1RemoPwrAbLocal Local device card fiber port 1 Remote Power status:
0:Abnormal
1:OK
2:None | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.12 |
| f1000EASXOamInfoChATxLocal Local device OAM Channel A TX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.120 |
| f1000EASXOamInfoChARxLocal Local device OAM Channel A RX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.121 |
| f1000EASXOamEventChATxLocal Local device OAM Channel A TX Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.122 |
| f1000EASXOamUniEvtChARxLocal Local device OAM Channel A RX Unique Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.123 |
| f1000EASXOamDupEvtChARxLocal Local device OAM Channel A RX Duplicate Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.124 |
| f1000EASXOamLbChATxLocal Local device OAM Channel A TX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.125 |
| f1000EASXOamLbChARxLocal Local device OAM Channel A RX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.126 |
| f1000EASXOamVarReqChATxLocal Local device OAM Channel A TX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.127 |
| f1000EASXOamVarReqChARxLocal Local device OAM Channel A RX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.128 |
| f1000EASXOamVarRspChATxLocal Local device OAM Channel A TX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.129 |
| f1000EASXFiber1IngressRateLocal Local device card fiber 1 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rat… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.13 |
| f1000EASXOamVarRspChARxLocal Local device OAM Channel A RX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.130 |
| f1000EASXOamOuiChATxLocal Local device OAM Channel A TX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.131 |
| f1000EASXOamOuiChARxLocal Local device OAM Channel A RX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.132 |
| f1000EASXOamUnknowChARxLocal Local device OAM Channel A RX Unsupported OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.133 |
| f1000EASXOamChBTxLocal Local device OAM Channel B TX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.134 |
| f1000EASXOamChBRxLocal Local device OAM Channel B RX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.135 |
| f1000EASXOamInfoChBTxLocal Local device OAM Channel B TX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.136 |
| f1000EASXOamInfoChBRxLocal Local device OAM Channel B RX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.137 |
| f1000EASXOamEventChBTxLocal Local device OAM Channel B TX Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.138 |
| f1000EASXOamUniEvtChBRxLocal Local device OAM Channel B RX Unique Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.139 |
| f1000EASXFiber1EgressRateLocal Local device card fiber 1 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.14 |
| f1000EASXOamDupEvtChBRxLocal Local device OAM Channel B RX Duplicate Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.140 |
| f1000EASXOamLbChBTxLocal Local device OAM Channel B TX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.141 |
| f1000EASXOamLbChBRxLocal Local device OAM Channel B RX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.142 |
| f1000EASXOamVarReqChBTxLocal Local device OAM Channel B TX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.143 |
| f1000EASXOamVarReqChBRxLocal Local device OAM Channel B RX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.144 |
| f1000EASXOamVarRspChBTxLocal Local device OAM Channel B TX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.145 |
| f1000EASXOamVarRspChBRxLocal Local device OAM Channel B RX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.146 |
| f1000EASXOamOuiChBTxLocal Local device OAM Channel B TX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.147 |
| f1000EASXOamOuiChBRxLocal Local device OAM Channel B RX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.148 |
| f1000EASXOamUnknowChBRxLocal Local device OAM Channel B RX Unsupported OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.300.40.1.149 |
| f1000EASXFiber2LinkLocal Local device card fiber port 2 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.15 |
| f1000EASXFiber1SpeedLocal Local device Fiber 1 speed :
0:1000Auto
1:1000FDX
2:100FDX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.150 |
| f1000EASXFiber2SpeedLocal Local device Fiber 2 speed :
0:1000Auto
1:1000FDX
2:100FDX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.151 |
| f1000EASXMacLearningLocal Local device Mac learning :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.152 |
| f1000EASXFiber1VLANLocal Local device Fiber 1 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.153 |
| f1000EASXFiber2VLANLocal Local device Fiber 2 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.154 |
| f1000EASXUtp3VLANLocal Local device UTP 3 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.155 |
| f1000EASXUtp4VLANLocal Local device UTP 4 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.156 |
| f1000EASXManagementLocal Local device management :
0:Group A
1:Group B
2:Group A+B | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.157 |
| f1000EASXRedundancyModeLocal Local device redundancy mode :
0:Auto
1:Manual Fiber 1
2:Manual Fiber 2
3:No Reverse
4:Link Budget | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.158 |
| f1000EASXPortVLANLocal Local device redundancy mode :
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.159 |
| f1000EASXFiber2OAMLoopedLocal Local device card fiber port 2 OAM looped:
0:Off
1:on | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.16 |
| f1000EASXRemoteTLPTLocal Local device redundancy mode :
0:Disalbe
1:Remote A
2:Remote B
3:Remote A&B
4:Remote A/3; Remote B/4 | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.160 |
| f1000EASXManagementVIDLocal Local device Management VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.161 |
| f1000EASXThresholdLocal Local device Threshold: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.162 |
| f1000EASXSensitivityLocal Local device Sensitivity: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.163 |
| f1000EASXTagTypeLocal Local device Tag Type (HEX) : | column | OctetString | .1.3.6.1.4.1.4756.20.300.40.1.164 |
| f1000EASXPort1VIDLocal Local device Port 1 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.165 |
| f1000EASXPort2VIDLocal Local device Port 2 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.166 |
| f1000EASXPort3VIDLocal Local device Port 3 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.167 |
| f1000EASXPort4VIDLocal Local device Port 4 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.168 |
| f1000EASXPort1QinQLocal Local device Port 1 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.169 |
| f1000EASXFiber2LBTestLocal Force remote device card to do fiber port 2 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.17 |
| f1000EASXPort2QinQLocal Local device Port 2 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.170 |
| f1000EASXPort3QinQLocal Local device Port 3 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.171 |
| f1000EASXPort4QinQLocal Local device Port 4 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.172 |
| f1000EASXVID1Local Local device VID 1: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.173 |
| f1000EASXVID2Local Local device VID 2: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.174 |
| f1000EASXVID3Local Local device VID 3: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.175 |
| f1000EASXVID4Local Local device VID 4: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.176 |
| f1000EASXVID5Local Local device VID 5: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.177 |
| f1000EASXVID6Local Local device VID 6: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.178 |
| f1000EASXVID7Local Local device VID 7: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.179 |
| f1000EASXFiber2OAMRLBStatusLocal Remote device card fiber port 1 LoopBack testing status:
0:Off
1:Ok
2:Fail | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.18 |
| f1000EASXVID8Local Local device VID 8: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.180 |
| f1000EASXVID9Local Local device VID 9: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.181 |
| f1000EASXVID10Local Local device VID 10: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.182 |
| f1000EASXVID11Local Local device VID 11: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.183 |
| f1000EASXVID12Local Local device VID 12: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.184 |
| f1000EASXVID13Local Local device VID 13: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.185 |
| f1000EASXVID14Local Local device VID 14: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.186 |
| f1000EASXVID15Local Local device VID 15: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.187 |
| f1000EASXVID16Local Local device VID 16: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.188 |
| f1000EASXPort1Member1Local Local device card port 1 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.189 |
| f1000EASXFiber2RemoPwrAbLocal Local device card fiber port 2 Remote Power status:
0:Abnormal
1:OK
2:None | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.19 |
| f1000EASXPort1Member2Local Local device card port 1 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.190 |
| f1000EASXPort1Member3Local Local device card port 1 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.191 |
| f1000EASXPort1Member4Local Local device card port 1 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.192 |
| f1000EASXPort1Member5Local Local device card port 1 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.193 |
| f1000EASXPort1Member6Local Local device card port 1 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.194 |
| f1000EASXPort1Member7Local Local device card port 1 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.195 |
| f1000EASXPort1Member8Local Local device card port 1 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.196 |
| f1000EASXPort1Member9Local Local device card port 1 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.197 |
| f1000EASXPort1Member10Local Local device card port 1 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.198 |
| f1000EASXPort1Member11Local Local device card port 1 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.199 |
| f1000EASXSlotIndexLocal A unique value for each local card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.2 |
| f1000EASXFiber2IngressRateLocal Local device card fiber 2 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rat… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.20 |
| f1000EASXPort1Member12Local Local device card port 1 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.200 |
| f1000EASXPort1Member13Local Local device card port 1 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.201 |
| f1000EASXPort1Member14Local Local device card port 1 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.202 |
| f1000EASXPort1Member15Local Local device card port 1 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.203 |
| f1000EASXPort1Member16Local Local device card port 1 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.204 |
| f1000EASXPort2Member1Local Local device card port 2 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.205 |
| f1000EASXPort2Member2Local Local device card port 2 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.206 |
| f1000EASXPort2Member3Local Local device card port 2 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.207 |
| f1000EASXPort2Member4Local Local device card port 2 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.208 |
| f1000EASXPort2Member5Local Local device card port 2 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.209 |
| f1000EASXFiber2EgressRateLocal Local device card fiber 2 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.21 |
| f1000EASXPort2Member6Local Local device card port 2 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.210 |
| f1000EASXPort2Member7Local Local device card port 2 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.211 |
| f1000EASXPort2Member8Local Local device card port 2 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.212 |
| f1000EASXPort2Member9Local Local device card port 2 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.213 |
| f1000EASXPort2Member10Local Local device card port 2 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.214 |
| f1000EASXPort2Member11Local Local device card port 2 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.215 |
| f1000EASXPort2Member12Local Local device card port 2 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.216 |
| f1000EASXPort2Member13Local Local device card port 2 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.217 |
| f1000EASXPort2Member14Local Local device card port 2 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.218 |
| f1000EASXPort2Member15Local Local device card port 2 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.219 |
| f1000EASXUtp3LinkLocal Local device card UTP port 3 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.22 |
| f1000EASXPort2Member16Local Local device card port 2 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.220 |
| f1000EASXPort3Member1Local Local device card port 3 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.221 |
| f1000EASXPort3Member2Local Local device card port 3 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.222 |
| f1000EASXPort3Member3Local Local device card port 3 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.223 |
| f1000EASXPort3Member4Local Local device card port 3 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.224 |
| f1000EASXPort3Member5Local Local device card port 3 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.225 |
| f1000EASXPort3Member6Local Local device card port 3 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.226 |
| f1000EASXPort3Member7Local Local device card port 3 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.227 |
| f1000EASXPort3Member8Local Local device card port 3 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.228 |
| f1000EASXPort3Member9Local Local device card port 3 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.229 |
| f1000EASXUtp3NegoLocal Local device card UTP port 3 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.23 |
| f1000EASXPort3Member10Local Local device card port 3 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.230 |
| f1000EASXPort3Member11Local Local device card port 3 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.231 |
| f1000EASXPort3Member12Local Local device card port 3 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.232 |
| f1000EASXPort3Member13Local Local device card port 3 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.233 |
| f1000EASXPort3Member14Local Local device card port 3 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.234 |
| f1000EASXPort3Member15Local Local device card port 3 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.235 |
| f1000EASXPort3Member16Local Local device card port 3 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.236 |
| f1000EASXPort4Member1Local Local device card port 4 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.237 |
| f1000EASXPort4Member2Local Local device card port 4 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.238 |
| f1000EASXPort4Member3Local Local device card port 4 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.239 |
| f1000EASXUtp3SpeedLocal Local device card UTP port 3 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.24 |
| f1000EASXPort4Member4Local Local device card port 4 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.240 |
| f1000EASXPort4Member5Local Local device card port 4 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.241 |
| f1000EASXPort4Member6Local Local device card port 4 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.242 |
| f1000EASXPort4Member7Local Local device card port 4 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.243 |
| f1000EASXPort4Member8Local Local device card port 4 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.244 |
| f1000EASXPort4Member9Local Local device card port 4 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.245 |
| f1000EASXPort4Member10Local Local device card port 4 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.246 |
| f1000EASXPort4Member11Local Local device card port 4 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.247 |
| f1000EASXPort4Member12Local Local device card port 4 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.248 |
| f1000EASXPort4Member13Local Local device card port 4 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.249 |
| f1000EASXUtp3DuplexLocal Local device card UTP port 3 duplex setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.25 |
| f1000EASXPort4Member14Local Local device card port 4 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.250 |
| f1000EASXPort4Member15Local Local device card port 4 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.251 |
| f1000EASXPort4Member16Local Local device card port 4 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.252 |
| f1000EASXIpAddressLocal Local device IP address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.300.40.1.253 |
| f1000EASXNetMaskLocal Local device Netmask | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.300.40.1.254 |
| f1000EASXGateWayLocal Local device Gateway | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.300.40.1.255 |
| f1000EASXSetDefaultLocal Local device set to default | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.256 |
| f1000EASXFx1LinkAlarmLocal Local device fiber 1 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.257 |
| f1000EASXFx2LinkAlarmLocal Local device fiber 2 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.258 |
| f1000EASXUtp3LinkAlarmLocal Local device utp 3 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.259 |
| f1000EASXUtp3SpeedStatusLocal Local device card UTP port 3 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.26 |
| f1000EASXUtp4LinkAlarmLocal Local device utp 4 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.260 |
| f1000EASXFiber1FEFLocal Local device card fiber1 port FEF status:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.261 |
| f1000EASXFiber2FEFLocal Local device card fiber2 port FEF status:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.262 |
| f1000EASXPingStatusLocal Local device icmp ping status
Show Ping Status
0: Normal
1: Not Ready
2: 5 packets transmitted, 5 received, 0 packet loss. (Ping OK)
3: 5 packets transmitted, 4 received, 1 pac… | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.263 |
| f1000EASXPingIpAddressLocal Local device ping IP address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.300.40.1.264 |
| f1000EASXPingStartLocal Local device ping start
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.265 |
| f1000EASXFX1RXOctetsLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.266 |
| f1000EASXFX1RXPacketLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.267 |
| f1000EASXFX1RXBroadLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.268 |
| f1000EASXFX1RXMultiLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.269 |
| f1000EASXUtp3DuplexStatusLocal Local device card UTP port 3 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.27 |
| f1000EASXFX1RXUniLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.270 |
| f1000EASXFX1RXPauseLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.271 |
| f1000EASXFX1RXFCSELocal FRM220-1000EAS/X RMON Fiber 1 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.272 |
| f1000EASXFX1RXUnderLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.273 |
| f1000EASXFX1RXOverLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.274 |
| f1000EASXFX1RXJabberLocal FRM220-1000EAS/X RMON Fiber 1 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.275 |
| f1000EASXFX1TXOctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.276 |
| f1000EASXFX1TXPacketLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.277 |
| f1000EASXFX1TXBroadLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.278 |
| f1000EASXFX1TXMultiLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.279 |
| f1000EASXUtp3IngressRateLocal Local device card utp 3 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.28 |
| f1000EASXFX1TXUniLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.280 |
| f1000EASXFX1TXPauseLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.281 |
| f1000EASXFX1TXCollisionLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.282 |
| f1000EASXFX10OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.283 |
| f1000EASXFX165OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.284 |
| f1000EASXFX1128OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.285 |
| f1000EASXFX1256OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.286 |
| f1000EASXFX1512OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.287 |
| f1000EASXFX11024OctetsLocal FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.288 |
| f1000EASXFX2RXOctetsLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.289 |
| f1000EASXUtp3EgressRateLocal Local device card utp 3 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate :… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.29 |
| f1000EASXFX2RXPacketLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.290 |
| f1000EASXFX2RXBroadLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.291 |
| f1000EASXFX2RXMultiLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.292 |
| f1000EASXFX2RXUniLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.293 |
| f1000EASXFX2RXPauseLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.294 |
| f1000EASXFX2RXFCSELocal FRM220-1000EAS/X RMON Fiber 2 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.295 |
| f1000EASXFX2RXUnderLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.296 |
| f1000EASXFX2RXOverLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.297 |
| f1000EASXFX2RXJabberLocal FRM220-1000EAS/X RMON Fiber 2 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.298 |
| f1000EASXFX2TXOctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.299 |
| f1000EASXCardHWVerLocal Local device card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.3 |
| f1000EASXUtp4LinkLocal Local device card UTP port 4 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.30 |
| f1000EASXFX2TXPacketLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.300 |
| f1000EASXFX2TXBroadLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.301 |
| f1000EASXFX2TXMultiLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.302 |
| f1000EASXFX2TXUniLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.303 |
| f1000EASXFX2TXPauseLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.304 |
| f1000EASXFX2TXCollisionLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.305 |
| f1000EASXFX20OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.306 |
| f1000EASXFX265OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.307 |
| f1000EASXFX2128OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.308 |
| f1000EASXFX2256OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.309 |
| f1000EASXUtp4NegoLocal Local device card UTP port 4 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.31 |
| f1000EASXFX2512OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.310 |
| f1000EASXFX21024OctetsLocal FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.311 |
| f1000EASXUTP3RXOctetsLocal FRM220-1000EAS/X RMON UTP 3 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.312 |
| f1000EASXUTP3RXPacketLocal FRM220-1000EAS/X RMON UTP 3 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.313 |
| f1000EASXUTP3RXBroadLocal FRM220-1000EAS/X RMON UTP 3 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.314 |
| f1000EASXUTP3RXMultiLocal FRM220-1000EAS/X RMON UTP 3 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.315 |
| f1000EASXUTP3RXUniLocal FRM220-1000EAS/X RMON UTP 3 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.316 |
| f1000EASXUTP3RXPauseLocal FRM220-1000EAS/X RMON UTP 3 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.317 |
| f1000EASXUTP3RXFCSELocal FRM220-1000EAS/X RMON UTP 3 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.318 |
| f1000EASXUTP3RXUnderLocal FRM220-1000EAS/X RMON UTP 3 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.319 |
| f1000EASXUtp4SpeedLocal Local device card UTP port 4 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.32 |
| f1000EASXUTP3RXOverLocal FRM220-1000EAS/X RMON UTP 3 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.320 |
| f1000EASXUTP3RXJabberLocal FRM220-1000EAS/X RMON UTP 3 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.321 |
| f1000EASXUTP3TXOctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.322 |
| f1000EASXUTP3TXPacketLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.323 |
| f1000EASXUTP3TXBroadLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.324 |
| f1000EASXUTP3TXMultiLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.325 |
| f1000EASXUTP3TXUniLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.326 |
| f1000EASXUTP3TXPauseLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.327 |
| f1000EASXUTP3TXCollisionLocal FRM220-1000EAS/X RMON UTP 3 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.328 |
| f1000EASXUTP30OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.329 |
| f1000EASXUtp4DuplexLocal Local device card UTP port 4 duplex setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.33 |
| f1000EASXUTP365OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.330 |
| f1000EASXUTP3128OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.331 |
| f1000EASXUTP3256OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.332 |
| f1000EASXUTP3512OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.333 |
| f1000EASXUTP31024OctetsLocal FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.334 |
| f1000EASXUTP4RXOctetsLocal FRM220-1000EAS/X RMON UTP 4 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.335 |
| f1000EASXUTP4RXPacketLocal FRM220-1000EAS/X RMON UTP 4 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.336 |
| f1000EASXUTP4RXBroadLocal FRM220-1000EAS/X RMON UTP 4 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.337 |
| f1000EASXUTP4RXMultiLocal FRM220-1000EAS/X RMON UTP 4 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.338 |
| f1000EASXUTP4RXUniLocal FRM220-1000EAS/X RMON UTP 4 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.339 |
| f1000EASXUtp4SpeedStatusLocal Local device card UTP port 4 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.34 |
| f1000EASXUTP4RXPauseLocal FRM220-1000EAS/X RMON UTP 4 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.340 |
| f1000EASXUTP4RXFCSELocal FRM220-1000EAS/X RMON UTP 4 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.341 |
| f1000EASXUTP4RXUnderLocal FRM220-1000EAS/X RMON UTP 4 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.342 |
| f1000EASXUTP4RXOverLocal FRM220-1000EAS/X RMON UTP 4 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.343 |
| f1000EASXUTP4RXJabberLocal FRM220-1000EAS/X RMON UTP 4 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.344 |
| f1000EASXUTP4TXOctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.345 |
| f1000EASXUTP4TXPacketLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.346 |
| f1000EASXUTP4TXBroadLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.347 |
| f1000EASXUTP4TXMultiLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.348 |
| f1000EASXUTP4TXUniLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.349 |
| f1000EASXUtp4DuplexStatusLocal Local device card UTP port 4 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.35 |
| f1000EASXUTP4TXPauseLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.350 |
| f1000EASXUTP4TXCollisionLocal FRM220-1000EAS/X RMON UTP 4 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.351 |
| f1000EASXUTP40OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.352 |
| f1000EASXUTP465OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.353 |
| f1000EASXUTP4128OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.354 |
| f1000EASXUTP4256OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.355 |
| f1000EASXUTP4512OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.356 |
| f1000EASXUTP41024OctetsLocal FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.357 |
| f1000EASXFiber2ThresholdLocal Local device Fiber2 Threshold: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.358 |
| f1000EASXFiber2SensitivityLocal Local device Fiber2 Sensitivity: | column | Integer32 | .1.3.6.1.4.1.4756.20.300.40.1.359 |
| f1000EASXUtp4IngressRateLocal Local device card utp 4 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.36 |
| f1000EASXFx1LBTLocal FRM220-1000EAS/X Fiber 1 LoopBack Test:
0: Disable
1: Enable
2: Not Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.360 |
| f1000EASXFx2LBTLocal FRM220-1000EAS/X Fiber 2 LoopBack Test:
0: Disable
1: Enable
2: Not Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.361 |
| f1000EASXUtp3LBTLocal FRM220-1000EAS/X UTP 3 LoopBack Test:
0: Disable
1: Enable
2: Not Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.362 |
| f1000EASXUtp4LBTLocal FRM220-1000EAS/X UTP 4 LoopBack Test:
0: Disable
1: Enable
2: Not Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.363 |
| f1000EASXUtp4EgressRateLocal Local device card utp 4 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate :… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.37 |
| f1000EASXDeviceActiveLocal Local device card active mode:
(It is read-only in local device.)
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.38 |
| f1000EASXDeviceResetLocal Force local device card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.39 |
| f1000EASXCardFWVerLocal Local device card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.4 |
| f1000EASXFiber1ActiveLocal Local device fiber port 1 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.40 |
| f1000EASXFiber2ActiveLocal Local device fiber port 2 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.41 |
| f1000EASXUtp3ActiveLocal Local device UTP port 3 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.42 |
| f1000EASXUtp4ActiveLocal Local device UTP port 4 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.43 |
| f1000EASXOamChAModeLocal Local device OAM Channel A mode:
0:Disable
1:passive
2:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.44 |
| f1000EASXOamChBModeLocal Local device OAM Channel B mode:
0:Disable
1:passive
2:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.45 |
| f1000EASXOamMaxPDUsLocal Local device OAM max OAMPDU size: 60-1518 Octets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.300.40.1.46 |
| f1000EASXFiber1AlsLocal Local device card port 1 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.47 |
| f1000EASXFiber2AlsLocal Local device card port 2 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.48 |
| f1000EASXPauseFrameLocal Local device card pause frame mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.49 |
| f1000EASXCardCPLDVerLocal Local device card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.5 |
| f1000EASXSendFHRtoALocal Local device card port 1 send Fiber Hardware Reset
to remote:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.50 |
| f1000EASXSendFHRtoBLocal Local device card port 2 send Fiber Hardware Reset
to remote:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.51 |
| f1000EASXFiber1LLFDepLogiLocal Local device card port 1 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.52 |
| f1000EASXFiber1LLFDepPort2Local Local device card port 1 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.53 |
| f1000EASXFiber1LLFDepPort3Local Local device card port 1 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.54 |
| f1000EASXFiber1LLFDepPort4Local Local device card port 1 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.55 |
| f1000EASXFiber2LLFDepLogiLocal Local device card port 2 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.56 |
| f1000EASXFiber2LLFDepPort1Local Local device card port 2 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.57 |
| f1000EASXFiber2LLFDepPort3Local Local device card port 2 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.58 |
| f1000EASXFiber2LLFDepPort4Local Local device card port 2 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.59 |
| f1000EASXCardFPGAVerLocal Local device card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.6 |
| f1000EASXUtp3LLFDepLogiLocal Local device card port 3 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.60 |
| f1000EASXUtp3LLFDepPort1Local Local device card port 3 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.61 |
| f1000EASXUtp3LLFDepPort2Local Local device card port 3 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.62 |
| f1000EASXUtp4LLFDepLogiLocal Local device card port 4 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.63 |
| f1000EASXUtp4LLFDepPort2Local Local device card port 4 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.65 |
| f1000EASXAdvanceFunsLocal Local device card Switch functions mode:
0:Normal
1:Port 1 and Port 2 Trunk Bandwidth 2G
2:Port 1 to Port 2 Mirror
4:port 1 and port 2 Redundancy
5:Static 802.1Q VLAN
6:Spanning T… | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.66 |
| f1000EASXFiber1InfoROM1Local Local device card port 1 INFORemoteOM information 1 valid:
0:Invalid
1:Valid | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.67 |
| f1000EASXFiber1InfoROM2Local Local device card port 1 INFORemoteOM information 2 valid:
0:Invalid
1:Valid(replacing D/D function | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.68 |
| f1000EASXFiber2InfoROM1Local Local device card port 2 INFORemoteOM information 1 valid:
0:Invalid
1:Valid | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.69 |
| f1000EASXModelLocal Local 1000EAS/X Serial Type | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.7 |
| f1000EASXFiber2InfoROM2Local Local device card port 2 INFORemoteOM information 2 valid:
0:Invalid
1:Valid(replacing D/D function) | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.70 |
| f1000EASXFiber1InfoSN1Local Local device card port 1 INFORemoteOM S/N 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.71 |
| f1000EASXFiber1InfoSN2Local Local device card port 1 INFORemoteOM S/N 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.72 |
| f1000EASXFiber2InfoSN1Local Local device card port 2 INFORemoteOM S/N 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.73 |
| f1000EASXFiber2InfoSN2Local Local device card port 2 INFORemoteOM S/N 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.74 |
| f1000EASXFiber1DDLocal Local device card fiber port 1 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.75 |
| f1000EASXFiber1DDVendorLocal Local device card fiber port 1 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.76 |
| f1000EASXFiber1DDPartNoLocal Local device card fiber port 1 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.77 |
| f1000EASXFiber1DDVendorSNLocal Local device card fiber port 1 D/D information:
Vendor Serial Number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.78 |
| f1000EASXFiber1DDFiberTypeLocal Local device card fiber port 1 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.79 |
| f1000EASXFiber1LinkLocal Local device card fiber port 1 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.8 |
| f1000EASXFiber1DDWaveLenLocal Local device card fiber port 1 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.80 |
| f1000EASXFiber1DDWaveLen2Local Local device card fiber port 1 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.81 |
| f1000EASXFiber1DDLinkLenLocal Local device card fiber port 1 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.82 |
| f1000EASXFiber1DDLenUnitLocal Local device card fiber port 1 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.83 |
| f1000EASXFiber1DDStatusLocal Local device card fiber port 1 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.84 |
| f1000EASXFiber1DDRxSensLocal Local device card fiber port 1 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.85 |
| f1000EASXFiber1DDTxPWRLocal Local device card fiber port 1 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.86 |
| f1000EASXFiber1DDRxPWRLocal Local device card fiber port 1 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.87 |
| f1000EASXFiber1DDTempLocal Local device card fiber port 1 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.88 |
| f1000EASXFiber1DDPWRMarginLocal Local device card fiber port 1 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.300.40.1.89 |
| f1000EASXFiber1OAMLoopedLocal Local device card fiber port 1 OAM looped:
0:Off
1:on | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.9 |
| f1000EASXFiber1DDPWRLossLocal Local device card fiber port 1 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.300.40.1.90 |
| f1000EASXFiber2DDLocal Local device card fiber port 2 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.91 |
| f1000EASXFiber2DDVendorLocal Local device card fiber port 2 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.92 |
| f1000EASXFiber2DDPartNoLocal Local device card fiber port 2 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.93 |
| f1000EASXFiber2DDVendorSNLocal Local device card fiber port 2 D/D information:
Vendor Serial Number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.94 |
| f1000EASXFiber2DDFiberTypeLocal Local device card fiber port 2 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.95 |
| f1000EASXFiber2DDWaveLenLocal Local device card fiber port 2 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.96 |
| f1000EASXFiber2DDWaveLen2Local Local device card fiber port 2 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.97 |
| f1000EASXFiber2DDLinkLenLocal Local device card fiber port 2 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.300.40.1.98 |
| f1000EASXFiber2DDLenUnitLocal Local device card fiber port 2 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.300.40.1.99 |