f1000EASXUtp4DuplexRemoteA
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.301.40.1.33
Object
column
r/w
Enumeration
RemoteA device card UTP port 4 duplex setting: 0:Half duplex mode 1:Full duplex mode
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.301.40.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f1000EASXRemoteAEntry
- Table
- f1000EASXRemoteATable
- Siblings
- 349
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f1000EASXChassisIndexRemoteA A unique value for each chassis ID.
For CH20, it is the chassis ID.
For CH08, it is always 0. | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.1 |
| f1000EASXFiber1LBTestRemoteA Force remote device card to do fiber port 1 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.10 |
| f1000EASXFiber2DDTempRemoteA RemoteA device card fiber port 2 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.100 |
| f1000EASXFiber2DDPWRMarginRemoteA RemoteA device card fiber port 2 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.301.40.1.101 |
| f1000EASXFiber2DDPWRLossRemoteA RemoteA device card fiber port 2 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.301.40.1.102 |
| f1000EASXClrRMONCntsRemoteA Clear RemoteA device card RMON IN/OUT counters:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.103 |
| f1000EASXFiber1RMONInRemoteA RemoteA device card port 1 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.104 |
| f1000EASXFiber1RMONOutRemoteA RemoteA device card port 1 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.105 |
| f1000EASXFiber2RMONInRemoteA RemoteA device card port 2 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.106 |
| f1000EASXFiber2RMONOutRemoteA RemoteA device card port 2 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.107 |
| f1000EASXUtp3RMONInRemoteA RemoteA device card port 3 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.108 |
| f1000EASXUtp3RMONOutRemoteA RemoteA device card port 3 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.109 |
| f1000EASXFiber1OAMRLBStatusRemoteA Remote device card fiber port 1 LoopBack testing status:
0:Off
1:Ok
2:Fail | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.11 |
| f1000EASXUtp4RMONInRemoteA RemoteA device card port 4 RMON IN counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.110 |
| f1000EASXUtp4RMONOutRemoteA RemoteA device card port 4 RMON OUT counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.111 |
| f1000EASXClrOAMCntsRemoteA Clear RemoteA device card OAM counters:
0:No action
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.112 |
| f1000EASXIpModeRemoteA On Rack Ip Mode:
0:Enable
1:Disable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.113 |
| f1000EASXOamChATxRemoteA RemoteA device OAM Channel A TX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.114 |
| f1000EASXOamChARxRemoteA RemoteA device OAM Channel A RX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.115 |
| f1000EASXOamInfoChATxRemoteA RemoteA device OAM Channel A TX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.116 |
| f1000EASXOamInfoChARxRemoteA RemoteA device OAM Channel A RX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.117 |
| f1000EASXOamEventChATxRemoteA RemoteA device OAM Channel A TX Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.118 |
| f1000EASXOamUniEvtChARxRemoteA RemoteA device OAM Channel A RX Unique Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.119 |
| f1000EASXFiber1RemoPwrAbRemoteA RemoteA device card fiber port 1 Remote Power status:
0:Abnormal
1:OK
2:None | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.12 |
| f1000EASXOamDupEvtChARxRemoteA RemoteA device OAM Channel A RX Duplicate Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.120 |
| f1000EASXOamLbChATxRemoteA RemoteA device OAM Channel A TX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.121 |
| f1000EASXOamLbChARxRemoteA RemoteA device OAM Channel A RX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.122 |
| f1000EASXOamVarReqChATxRemoteA RemoteA device OAM Channel A TX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.123 |
| f1000EASXOamVarReqChARxRemoteA RemoteA device OAM Channel A RX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.124 |
| f1000EASXOamVarRspChATxRemoteA RemoteA device OAM Channel A TX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.125 |
| f1000EASXOamVarRspChARxRemoteA RemoteA device OAM Channel A RX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.126 |
| f1000EASXOamOuiChATxRemoteA RemoteA device OAM Channel A TX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.127 |
| f1000EASXOamOuiChARxRemoteA RemoteA device OAM Channel A RX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.128 |
| f1000EASXOamUnknowChARxRemoteA RemoteA device OAM Channel A RX Unsupported OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.129 |
| f1000EASXFiber1IngressRateRemoteA RemoteA device card fiber 1 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite R… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.13 |
| f1000EASXOamChBTxRemoteA RemoteA device OAM Channel B TX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.130 |
| f1000EASXOamChBRxRemoteA RemoteA device OAM Channel B RX OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.131 |
| f1000EASXOamInfoChBTxRemoteA RemoteA device OAM Channel B TX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.132 |
| f1000EASXOamInfoChBRxRemoteA RemoteA device OAM Channel B RX Information OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.133 |
| f1000EASXOamEventChBTxRemoteA RemoteA device OAM Channel B TX Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.134 |
| f1000EASXOamUniEvtChBRxRemoteA RemoteA device OAM Channel B RX Unique Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.135 |
| f1000EASXOamDupEvtChBRxRemoteA RemoteA device OAM Channel B RX Duplicate Event OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.136 |
| f1000EASXOamLbChBTxRemoteA RemoteA device OAM Channel B TX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.137 |
| f1000EASXOamLbChBRxRemoteA RemoteA device OAM Channel B RX Loopback Control OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.138 |
| f1000EASXOamVarReqChBTxRemoteA RemoteA device OAM Channel B TX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.139 |
| f1000EASXFiber1EgressRateRemoteA RemoteA device card fiber 1 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Ra… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.14 |
| f1000EASXOamVarReqChBRxRemoteA RemoteA device OAM Channel B RX Variable Request OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.140 |
| f1000EASXOamVarRspChBTxRemoteA RemoteA device OAM Channel B TX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.141 |
| f1000EASXOamVarRspChBRxRemoteA RemoteA device OAM Channel B RX Variable Response OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.142 |
| f1000EASXOamOuiChBTxRemoteA RemoteA device OAM Channel B TX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.143 |
| f1000EASXOamOuiChBRxRemoteA RemoteA device OAM Channel B RX OUI OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.144 |
| f1000EASXOamUnknowChBRxRemoteA RemoteA device OAM Channel B RX Unsupported OAMPDU frame count | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.301.40.1.145 |
| f1000EASXFiber1SpeedRemoteA RemoteA device Fiber 1 speed :
0:1000Auto
1:1000FDX
2:100FDX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.146 |
| f1000EASXFiber2SpeedRemoteA RemoteA device Fiber 2 speed :
0:1000Auto
1:1000FDX
2:100FDX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.147 |
| f1000EASXMacLearningRemoteA RemoteA device Mac learning :
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.148 |
| f1000EASXFiber1VLANRemoteA RemoteA device Fiber 1 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.149 |
| f1000EASXFiber2LinkRemoteA RemoteA device card fiber port 2 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.15 |
| f1000EASXFiber2VLANRemoteA RemoteA device Fiber 2 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.150 |
| f1000EASXUtp3VLANRemoteA RemoteA device UTP 3 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.151 |
| f1000EASXUtp4VLANRemoteA RemoteA device UTP 4 VLAN group :
0:Group A
1:Group B | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.152 |
| f1000EASXManagementRemoteA RemoteA device management :
0:Group A
1:Group B
2:Group A+B | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.153 |
| f1000EASXRedundancyModeRemoteA RemoteA device redundancy mode :
0:Auto
1:Manual Fiber 1
2:Manual Fiber 2
3:No Reverse
4:Link Budget | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.154 |
| f1000EASXPortVLANRemoteA RemoteA device redundancy mode :
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.155 |
| f1000EASXRemoteTLPTRemoteA RemoteA device redundancy mode :
0:Disalbe
1:Remote A
2:Remote B
3:Remote A&B
4:Remote A/3; Remote B/4 | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.156 |
| f1000EASXManagementVIDRemoteA RemoteA device Management VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.157 |
| f1000EASXThresholdRemoteA RemoteA device Threshold: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.158 |
| f1000EASXSensitivityRemoteA RemoteA device Sensitivity: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.159 |
| f1000EASXFiber2OAMLoopedRemoteA RemoteA device card fiber port 2 OAM looped:
0:Off
1:on | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.16 |
| f1000EASXTagTypeRemoteA RemoteA device Tag Type (HEX) : | column | OctetString | .1.3.6.1.4.1.4756.20.301.40.1.160 |
| f1000EASXPort1VIDRemoteA RemoteA device Port 1 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.161 |
| f1000EASXPort2VIDRemoteA RemoteA device Port 2 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.162 |
| f1000EASXPort3VIDRemoteA RemoteA device Port 3 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.163 |
| f1000EASXPort4VIDRemoteA RemoteA device Port 4 VID : | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.164 |
| f1000EASXPort1QinQRemoteA RemoteA device Port 1 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.165 |
| f1000EASXPort2QinQRemoteA RemoteA device Port 2 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.166 |
| f1000EASXPort3QinQRemoteA RemoteA device Port 3 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.167 |
| f1000EASXPort4QinQRemoteA RemoteA device Port 4 Q in Q Support :
1:Disable
2:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.168 |
| f1000EASXVID1RemoteA RemoteA device VID 1: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.169 |
| f1000EASXFiber2LBTestRemoteA Force remote device card to do fiber port 2 LoopBack testing:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.17 |
| f1000EASXVID2RemoteA RemoteA device VID 2: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.170 |
| f1000EASXVID3RemoteA RemoteA device VID 3: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.171 |
| f1000EASXVID4RemoteA RemoteA device VID 4: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.172 |
| f1000EASXVID5RemoteA RemoteA device VID 5: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.173 |
| f1000EASXVID6RemoteA RemoteA device VID 6: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.174 |
| f1000EASXVID7RemoteA RemoteA device VID 7: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.175 |
| f1000EASXVID8RemoteA RemoteA device VID 8: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.176 |
| f1000EASXVID9RemoteA RemoteA device VID 9: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.177 |
| f1000EASXVID10RemoteA RemoteA device VID 10: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.178 |
| f1000EASXVID11RemoteA RemoteA device VID 11: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.179 |
| f1000EASXFiber2OAMRLBStatusRemoteA Remote device card fiber port 1 LoopBack testing status:
0:Off
1:Ok
2:Fail | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.18 |
| f1000EASXVID12RemoteA RemoteA device VID 12: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.180 |
| f1000EASXVID13RemoteA RemoteA device VID 13: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.181 |
| f1000EASXVID14RemoteA RemoteA device VID 14: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.182 |
| f1000EASXVID15RemoteA RemoteA device VID 15: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.183 |
| f1000EASXVID16RemoteA RemoteA device VID 16: | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.184 |
| f1000EASXPort1Member1RemoteA RemoteA device card port 1 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.185 |
| f1000EASXPort1Member2RemoteA RemoteA device card port 1 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.186 |
| f1000EASXPort1Member3RemoteA RemoteA device card port 1 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.187 |
| f1000EASXPort1Member4RemoteA RemoteA device card port 1 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.188 |
| f1000EASXPort1Member5RemoteA RemoteA device card port 1 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.189 |
| f1000EASXFiber2RemoPwrAbRemoteA RemoteA device card fiber port 2 Remote Power status:
0:Abnormal
1:OK
2:None | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.19 |
| f1000EASXPort1Member6RemoteA RemoteA device card port 1 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.190 |
| f1000EASXPort1Member7RemoteA RemoteA device card port 1 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.191 |
| f1000EASXPort1Member8RemoteA RemoteA device card port 1 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.192 |
| f1000EASXPort1Member9RemoteA RemoteA device card port 1 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.193 |
| f1000EASXPort1Member10RemoteA RemoteA device card port 1 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.194 |
| f1000EASXPort1Member11RemoteA RemoteA device card port 1 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.195 |
| f1000EASXPort1Member12RemoteA RemoteA device card port 1 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.196 |
| f1000EASXPort1Member13RemoteA RemoteA device card port 1 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.197 |
| f1000EASXPort1Member14RemoteA RemoteA device card port 1 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.198 |
| f1000EASXPort1Member15RemoteA RemoteA device card port 1 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.199 |
| f1000EASXSlotIndexRemoteA A unique value for each RemoteA card.
It is the slot location number. | column | Integer32 | .1.3.6.1.4.1.4756.20.301.40.1.2 |
| f1000EASXFiber2IngressRateRemoteA RemoteA device card fiber 2 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite R… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.20 |
| f1000EASXPort1Member16RemoteA RemoteA device card port 1 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.200 |
| f1000EASXPort2Member1RemoteA RemoteA device card port 2 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.201 |
| f1000EASXPort2Member2RemoteA RemoteA device card port 2 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.202 |
| f1000EASXPort2Member3RemoteA RemoteA device card port 2 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.203 |
| f1000EASXPort2Member4RemoteA RemoteA device card port 2 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.204 |
| f1000EASXPort2Member5RemoteA RemoteA device card port 2 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.205 |
| f1000EASXPort2Member6RemoteA RemoteA device card port 2 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.206 |
| f1000EASXPort2Member7RemoteA RemoteA device card port 2 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.207 |
| f1000EASXPort2Member8RemoteA RemoteA device card port 2 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.208 |
| f1000EASXPort2Member9RemoteA RemoteA device card port 2 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.209 |
| f1000EASXFiber2EgressRateRemoteA RemoteA device card fiber 2 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Ra… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.21 |
| f1000EASXPort2Member10RemoteA RemoteA device card port 2 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.210 |
| f1000EASXPort2Member11RemoteA RemoteA device card port 2 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.211 |
| f1000EASXPort2Member12RemoteA RemoteA device card port 2 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.212 |
| f1000EASXPort2Member13RemoteA RemoteA device card port 2 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.213 |
| f1000EASXPort2Member14RemoteA RemoteA device card port 2 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.214 |
| f1000EASXPort2Member15RemoteA RemoteA device card port 2 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.215 |
| f1000EASXPort2Member16RemoteA RemoteA device card port 2 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.216 |
| f1000EASXPort3Member1RemoteA RemoteA device card port 3 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.217 |
| f1000EASXPort3Member2RemoteA RemoteA device card port 3 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.218 |
| f1000EASXPort3Member3RemoteA RemoteA device card port 3 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.219 |
| f1000EASXUtp3LinkRemoteA RemoteA device card UTP port 3 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.22 |
| f1000EASXPort3Member4RemoteA RemoteA device card port 3 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.220 |
| f1000EASXPort3Member5RemoteA RemoteA device card port 3 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.221 |
| f1000EASXPort3Member6RemoteA RemoteA device card port 3 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.222 |
| f1000EASXPort3Member7RemoteA RemoteA device card port 3 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.223 |
| f1000EASXPort3Member8RemoteA RemoteA device card port 3 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.224 |
| f1000EASXPort3Member9RemoteA RemoteA device card port 3 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.225 |
| f1000EASXPort3Member10RemoteA RemoteA device card port 3 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.226 |
| f1000EASXPort3Member11RemoteA RemoteA device card port 3 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.227 |
| f1000EASXPort3Member12RemoteA RemoteA device card port 3 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.228 |
| f1000EASXPort3Member13RemoteA RemoteA device card port 3 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.229 |
| f1000EASXUtp3NegoRemoteA RemoteA device card UTP port 3 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.23 |
| f1000EASXPort3Member14RemoteA RemoteA device card port 3 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.230 |
| f1000EASXPort3Member15RemoteA RemoteA device card port 3 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.231 |
| f1000EASXPort3Member16RemoteA RemoteA device card port 3 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.232 |
| f1000EASXPort4Member1RemoteA RemoteA device card port 4 member:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.233 |
| f1000EASXPort4Member2RemoteA RemoteA device card port 4 member 2:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.234 |
| f1000EASXPort4Member3RemoteA RemoteA device card port 4 member 3:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.235 |
| f1000EASXPort4Member4RemoteA RemoteA device card port 4 member 4:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.236 |
| f1000EASXPort4Member5RemoteA RemoteA device card port 4 member 5:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.237 |
| f1000EASXPort4Member6RemoteA RemoteA device card port 4 member 6:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.238 |
| f1000EASXPort4Member7RemoteA RemoteA device card port 4 member 7:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.239 |
| f1000EASXUtp3SpeedRemoteA RemoteA device card UTP port 3 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.24 |
| f1000EASXPort4Member8RemoteA RemoteA device card port 4 member 8:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.240 |
| f1000EASXPort4Member9RemoteA RemoteA device card port 4 member 9:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.241 |
| f1000EASXPort4Member10RemoteA RemoteA device card port 4 member 10:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.242 |
| f1000EASXPort4Member11RemoteA RemoteA device card port 4 member 11:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.243 |
| f1000EASXPort4Member12RemoteA RemoteA device card port 4 member 12:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.244 |
| f1000EASXPort4Member13RemoteA RemoteA device card port 4 member 13:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.245 |
| f1000EASXPort4Member14RemoteA RemoteA device card port 4 member 14:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.246 |
| f1000EASXPort4Member15RemoteA RemoteA device card port 4 member 15:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.247 |
| f1000EASXPort4Member16RemoteA RemoteA device card port 4 member 16:
0:Unmodify
1:Untagged
2:Tagged
3:Nonmember | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.248 |
| f1000EASXIpAddressRemoteA RemoteA device IP address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.301.40.1.249 |
| f1000EASXUtp3DuplexRemoteA RemoteA device card UTP port 3 duplex setting:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.25 |
| f1000EASXNetMaskRemoteA RemoteA device Netmask | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.301.40.1.250 |
| f1000EASXGateWayRemoteA RemoteA device Gateway | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4756.20.301.40.1.251 |
| f1000EASXSetDefaultRemoteA RemoteA device set to default | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.252 |
| f1000EASXFx1LinkAlarmRemoteA RemoteA device fiber 1 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.253 |
| f1000EASXFx2LinkAlarmRemoteA RemoteA device fiber 2 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.254 |
| f1000EASXUtp3LinkAlarmRemoteA RemoteA device utp 3 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.255 |
| f1000EASXUtp4LinkAlarmRemoteA RemoteA device utp 4 link alarm
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.256 |
| f1000EASXFiber1FEFRemoteA RemoteA device card fiber1 port FEF status:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.257 |
| f1000EASXFiber2FEFRemoteA RemoteA device card fiber2 port FEF status:
0:Off
1:Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.258 |
| f1000EASXFX1RXOctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.259 |
| f1000EASXUtp3SpeedStatusRemoteA RemoteA device card UTP port 3 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.26 |
| f1000EASXFX1RXPacketRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.260 |
| f1000EASXFX1RXBroadRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.261 |
| f1000EASXFX1RXMultiRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.262 |
| f1000EASXFX1RXUniRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.263 |
| f1000EASXFX1RXPauseRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.264 |
| f1000EASXFX1RXFCSERemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.265 |
| f1000EASXFX1RXUnderRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.266 |
| f1000EASXFX1RXOverRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.267 |
| f1000EASXFX1RXJabberRemoteA FRM220-1000EAS/X RMON Fiber 1 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.268 |
| f1000EASXFX1TXOctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.269 |
| f1000EASXUtp3DuplexStatusRemoteA RemoteA device card UTP port 3 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.27 |
| f1000EASXFX1TXPacketRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.270 |
| f1000EASXFX1TXBroadRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.271 |
| f1000EASXFX1TXMultiRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.272 |
| f1000EASXFX1TXUniRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.273 |
| f1000EASXFX1TXPauseRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.274 |
| f1000EASXFX1TXCollisionRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.275 |
| f1000EASXFX10OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.276 |
| f1000EASXFX165OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.277 |
| f1000EASXFX1128OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.278 |
| f1000EASXFX1256OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.279 |
| f1000EASXUtp3IngressRateRemoteA RemoteA device card utp 3 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rat… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.28 |
| f1000EASXFX1512OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.280 |
| f1000EASXFX11024OctetsRemoteA FRM220-1000EAS/X RMON Fiber 1 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.281 |
| f1000EASXFX2RXOctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.282 |
| f1000EASXFX2RXPacketRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.283 |
| f1000EASXFX2RXBroadRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.284 |
| f1000EASXFX2RXMultiRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.285 |
| f1000EASXFX2RXUniRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.286 |
| f1000EASXFX2RXPauseRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.287 |
| f1000EASXFX2RXFCSERemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.288 |
| f1000EASXFX2RXUnderRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.289 |
| f1000EASXUtp3EgressRateRemoteA RemoteA device card utp 3 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.29 |
| f1000EASXFX2RXOverRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.290 |
| f1000EASXFX2RXJabberRemoteA FRM220-1000EAS/X RMON Fiber 2 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.291 |
| f1000EASXFX2TXOctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.292 |
| f1000EASXFX2TXPacketRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.293 |
| f1000EASXFX2TXBroadRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.294 |
| f1000EASXFX2TXMultiRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.295 |
| f1000EASXFX2TXUniRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.296 |
| f1000EASXFX2TXPauseRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.297 |
| f1000EASXFX2TXCollisionRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.298 |
| f1000EASXFX20OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.299 |
| f1000EASXCardHWVerRemoteA RemoteA device card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.3 |
| f1000EASXUtp4LinkRemoteA RemoteA device card UTP port 4 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.30 |
| f1000EASXFX265OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.300 |
| f1000EASXFX2128OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.301 |
| f1000EASXFX2256OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.302 |
| f1000EASXFX2512OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.303 |
| f1000EASXFX21024OctetsRemoteA FRM220-1000EAS/X RMON Fiber 2 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.304 |
| f1000EASXUTP3RXOctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.305 |
| f1000EASXUTP3RXPacketRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.306 |
| f1000EASXUTP3RXBroadRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.307 |
| f1000EASXUTP3RXMultiRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.308 |
| f1000EASXUTP3RXUniRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.309 |
| f1000EASXUtp4NegoRemoteA RemoteA device card UTP port 4 negotiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.31 |
| f1000EASXUTP3RXPauseRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.310 |
| f1000EASXUTP3RXFCSERemoteA FRM220-1000EAS/X RMON UTP 3 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.311 |
| f1000EASXUTP3RXUnderRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.312 |
| f1000EASXUTP3RXOverRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.313 |
| f1000EASXUTP3RXJabberRemoteA FRM220-1000EAS/X RMON UTP 3 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.314 |
| f1000EASXUTP3TXOctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.315 |
| f1000EASXUTP3TXPacketRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.316 |
| f1000EASXUTP3TXBroadRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.317 |
| f1000EASXUTP3TXMultiRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.318 |
| f1000EASXUTP3TXUniRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.319 |
| f1000EASXUtp4SpeedRemoteA RemoteA device card UTP port 4 speed setting:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.32 |
| f1000EASXUTP3TXPauseRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.320 |
| f1000EASXUTP3TXCollisionRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.321 |
| f1000EASXUTP30OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.322 |
| f1000EASXUTP365OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.323 |
| f1000EASXUTP3128OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.324 |
| f1000EASXUTP3256OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.325 |
| f1000EASXUTP3512OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.326 |
| f1000EASXUTP31024OctetsRemoteA FRM220-1000EAS/X RMON UTP 3 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.327 |
| f1000EASXUTP4RXOctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.328 |
| f1000EASXUTP4RXPacketRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.329 |
| f1000EASXUTP4RXBroadRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.330 |
| f1000EASXUTP4RXMultiRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.331 |
| f1000EASXUTP4RXUniRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.332 |
| f1000EASXUTP4RXPauseRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.333 |
| f1000EASXUTP4RXFCSERemoteA FRM220-1000EAS/X RMON UTP 4 Receiver FCS Error Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.334 |
| f1000EASXUTP4RXUnderRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Under Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.335 |
| f1000EASXUTP4RXOverRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Over Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.336 |
| f1000EASXUTP4RXJabberRemoteA FRM220-1000EAS/X RMON UTP 4 Receiver Jabber Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.337 |
| f1000EASXUTP4TXOctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.338 |
| f1000EASXUTP4TXPacketRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.339 |
| f1000EASXUtp4SpeedStatusRemoteA RemoteA device card UTP port 4 speed status:
0:10 Base-T
1:100 Base-TX
2:1000 Base-TX | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.34 |
| f1000EASXUTP4TXBroadRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Broadcast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.340 |
| f1000EASXUTP4TXMultiRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Multicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.341 |
| f1000EASXUTP4TXUniRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Unicast Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.342 |
| f1000EASXUTP4TXPauseRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Pause Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.343 |
| f1000EASXUTP4TXCollisionRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver Collision Packets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.344 |
| f1000EASXUTP40OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 0~64 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.345 |
| f1000EASXUTP465OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 65~127 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.346 |
| f1000EASXUTP4128OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 128~255 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.347 |
| f1000EASXUTP4256OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 256~511 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.348 |
| f1000EASXUTP4512OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 512~1023 Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.349 |
| f1000EASXUtp4DuplexStatusRemoteA RemoteA device card UTP port 4 duplex status:
0:Half duplex mode
1:Full duplex mode | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.35 |
| f1000EASXUTP41024OctetsRemoteA FRM220-1000EAS/X RMON UTP 4 Transceiver/Receiver 1024~Max Octets. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.350 |
| f1000EASXUtp4IngressRateRemoteA RemoteA device card utp 4 Ingress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rat… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.36 |
| f1000EASXUtp4EgressRateRemoteA RemoteA device card utp 4 Egress Rate Limit:
0 = Unlimit
input format: 64k(K),100m(M),100
If doesn't input the unit, the default was Mega.
Limite Rate… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.37 |
| f1000EASXDeviceResetRemoteA Force RemoteA device card to reset mode:
0:Off
1:Action | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.38 |
| f1000EASXUtp3ActiveRemoteA RemoteA device UTP port 3 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.39 |
| f1000EASXCardFWVerRemoteA RemoteA device card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.4 |
| f1000EASXUtp4ActiveRemoteA RemoteA device UTP port 4 active mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.40 |
| f1000EASXOamChAModeRemoteA RemoteA device OAM Channel A mode:
0:Disable
1:passive
2:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.41 |
| f1000EASXOamChBModeRemoteA RemoteA device OAM Channel B mode:
0:Disable
1:passive
2:Active | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.42 |
| f1000EASXOamMaxPDUsRemoteA RemoteA device OAM max OAMPDU size: 60-1518 Octets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.301.40.1.43 |
| f1000EASXFiber1AlsRemoteA RemoteA device card port 1 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.44 |
| f1000EASXFiber2AlsRemoteA RemoteA device card port 2 Auto Laser Shutdown mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.45 |
| f1000EASXPauseFrameRemoteA RemoteA device card pause frame mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.46 |
| f1000EASXFHRModeRemoteA RemoteA device card FHR Mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.47 |
| f1000EASXFiber1LLFDepLogiRemoteA RemoteA device card port 1 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.48 |
| f1000EASXFiber1LLFDepPort2RemoteA RemoteA device card port 1 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.49 |
| f1000EASXCardCPLDVerRemoteA RemoteA device card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.5 |
| f1000EASXFiber1LLFDepPort3RemoteA RemoteA device card port 1 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.50 |
| f1000EASXFiber1LLFDepPort4RemoteA RemoteA device card port 1 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.51 |
| f1000EASXFiber2LLFDepLogiRemoteA RemoteA device card port 2 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.52 |
| f1000EASXFiber2LLFDepPort1RemoteA RemoteA device card port 2 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.53 |
| f1000EASXFiber2LLFDepPort3RemoteA RemoteA device card port 2 Link Loss Forwarding
depends on port 3 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.54 |
| f1000EASXFiber2LLFDepPort4RemoteA RemoteA device card port 2 Link Loss Forwarding
depends on port 4 Ethernet Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.55 |
| f1000EASXUtp3LLFDepLogiRemoteA RemoteA device card port 3 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.56 |
| f1000EASXUtp3LLFDepPort1RemoteA RemoteA device card port 3 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.57 |
| f1000EASXUtp3LLFDepPort2RemoteA RemoteA device card port 3 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.58 |
| f1000EASXUtp4LLFDepLogiRemoteA RemoteA device card port 4 Link Loss Forwarding
depends boolean logic:
0:and
1:or | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.59 |
| f1000EASXCardFPGAVerRemoteA RemoteA device card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.6 |
| f1000EASXUtp4LLFDepPort1RemoteA RemoteA device card port 4 Link Loss Forwarding
depends on port 1 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.60 |
| f1000EASXUtp4LLFDepPort2RemoteA RemoteA device card port 4 Link Loss Forwarding
depends on port 2 Fiber Rx link:
0:don't care
1:selected | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.61 |
| f1000EASXAdvanceFunsRemoteA RemoteA device card Switch functions mode:
0:Normal
1:Port 1 and Port 2 Trunk Bandwidth 2G
2:Port 1 to Port 2 Mirror
4:port 1 and port 2 Redundancy
5:Static 802.1Q VLAN
6:Spanning… | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.62 |
| f1000EASXFiber1InfoROM1RemoteA RemoteA device card port 1 INFORemoteOM information 1 valid:
0:Invalid
1:Valid | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.63 |
| f1000EASXFiber1InfoROM2RemoteA RemoteA device card port 1 INFORemoteOM information 2 valid:
0:Invalid
1:Valid(replacing D/D function | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.64 |
| f1000EASXFiber2InfoROM1RemoteA RemoteA device card port 2 INFORemoteOM information 1 valid:
0:Invalid
1:Valid | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.65 |
| f1000EASXFiber2InfoROM2RemoteA RemoteA device card port 2 INFORemoteOM information 2 valid:
0:Invalid
1:Valid(replacing D/D function) | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.66 |
| f1000EASXFiber1InfoSN1RemoteA RemoteA device card port 1 INFORemoteOM S/N 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.67 |
| f1000EASXFiber1InfoSN2RemoteA RemoteA device card port 1 INFORemoteOM S/N 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.68 |
| f1000EASXFiber2InfoSN1RemoteA RemoteA device card port 2 INFORemoteOM S/N 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.69 |
| f1000EASXModelRemoteA RemoteA 1000EAS/X Serial Type | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.7 |
| f1000EASXFiber2InfoSN2RemoteA RemoteA device card port 2 INFORemoteOM S/N 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.70 |
| f1000EASXFiber1DDRemoteA RemoteA device card fiber port 1 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.71 |
| f1000EASXFiber1DDVendorRemoteA RemoteA device card fiber port 1 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.72 |
| f1000EASXFiber1DDPartNoRemoteA RemoteA device card fiber port 1 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.73 |
| f1000EASXFiber1DDVendorSNRemoteA RemoteA device card fiber port 1 D/D information:
Vendor Serial Number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.74 |
| f1000EASXFiber1DDFiberTypeRemoteA RemoteA device card fiber port 1 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.75 |
| f1000EASXFiber1DDWaveLenRemoteA RemoteA device card fiber port 1 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.76 |
| f1000EASXFiber1DDWaveLen2RemoteA RemoteA device card fiber port 1 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.77 |
| f1000EASXFiber1DDLinkLenRemoteA RemoteA device card fiber port 1 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.78 |
| f1000EASXFiber1DDLenUnitRemoteA RemoteA device card fiber port 1 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.79 |
| f1000EASXFiber1LinkRemoteA RemoteA device card fiber port 1 link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.8 |
| f1000EASXFiber1DDStatusRemoteA RemoteA device card fiber port 1 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.80 |
| f1000EASXFiber1DDRxSensRemoteA RemoteA device card fiber port 1 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.81 |
| f1000EASXFiber1DDTxPWRRemoteA RemoteA device card fiber port 1 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.82 |
| f1000EASXFiber1DDRxPWRRemoteA RemoteA device card fiber port 1 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.83 |
| f1000EASXFiber1DDTempRemoteA RemoteA device card fiber port 1 D/D information:
Temperature in degree C | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.84 |
| f1000EASXFiber1DDPWRMarginRemoteA RemoteA device card fiber port 1 D/D information:
Power margin | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.301.40.1.85 |
| f1000EASXFiber1DDPWRLossRemoteA RemoteA device card fiber port 1 D/D information:
Power loss | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.301.40.1.86 |
| f1000EASXFiber2DDRemoteA RemoteA device card fiber port 2 Digital Diagnostic
function:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.87 |
| f1000EASXFiber2DDVendorRemoteA RemoteA device card fiber port 2 D/D information:
Vendor name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.88 |
| f1000EASXFiber2DDPartNoRemoteA RemoteA device card fiber port 2 D/D information:
Vendor part number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.89 |
| f1000EASXFiber1OAMLoopedRemoteA RemoteA device card fiber port 1 OAM looped:
0:Off
1:on | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.9 |
| f1000EASXFiber2DDVendorSNRemoteA RemoteA device card fiber port 2 D/D information:
Vendor Serial Number | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.90 |
| f1000EASXFiber2DDFiberTypeRemoteA RemoteA device card fiber port 2 D/D information:
Fiber Type | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.91 |
| f1000EASXFiber2DDWaveLenRemoteA RemoteA device card fiber port 2 D/D information:
Wave length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.92 |
| f1000EASXFiber2DDWaveLen2RemoteA RemoteA device card fiber port 2 D/D information:
Wave length 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.93 |
| f1000EASXFiber2DDLinkLenRemoteA RemoteA device card fiber port 2 D/D information:
Link length | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.94 |
| f1000EASXFiber2DDLenUnitRemoteA RemoteA device card fiber port 2 D/D information:
Length Unit | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.95 |
| f1000EASXFiber2DDStatusRemoteA RemoteA device card fiber port 2 D/D information:
Status Support | column | Enumeration | .1.3.6.1.4.1.4756.20.301.40.1.96 |
| f1000EASXFiber2DDRxSensRemoteA RemoteA device card fiber port 2 D/D information:
Rx Sensitivity | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.97 |
| f1000EASXFiber2DDTxPWRRemoteA RemoteA device card fiber port 2 D/D information:
Tx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.98 |
| f1000EASXFiber2DDRxPWRRemoteA RemoteA device card fiber port 2 D/D information:
Rx power | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.301.40.1.99 |