eoe1GSFxFlowCtrlRemote
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.611.20.1.30
Object
column
r/w
Enumeration
Eoe1/GS card fiber Flow Control active: 0:disable 1:enable
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.611.20.1.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eoe1GSRemoteEntry
- Table
- eoe1GSRemoteTable
- Siblings
- 59
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoe1GSChassisIndexRemote A unique value for each card.
It starts from 0 to 9 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.611.20.1.1 |
| eoe1GSLOFRemote Eoe1/GS card LOF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.10 |
| eoe1GSAISRemote Eoe1/GS card AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.11 |
| eoe1GSRAIRemote Eoe1/GS card RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.12 |
| eoe1GSCRCRemote Eoe1/GS card CRC status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.13 |
| eoe1GSBPVRemote Eoe1/GS card BPV status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.14 |
| eoe1GSLoopStatusRemote Eoe1/GS card Loop status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.15 |
| eoe1GSE1ModeRemote Eoe1/GS card E1 mode:
0:Unframe
1:Frame | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.16 |
| eoe1GSE1LoopDetectionRemote Eoe1/GS card E1 loop detection:
0:Disable
1:Enalbe | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.17 |
| eoe1GSE1HDLCRemote Eoe1/GS Series card E1 HDLC:
0:Inverse
1:Consisten | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.18 |
| eoe1GSTimingSourceRemote Eoe1/GS card timing source:
0:Recovery from E1 receive
1:Internal oscillator | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.19 |
| eoe1GSSlotIndexRemote A unique value for each card.
It starts from 1 to 20 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.611.20.1.2 |
| eoe1GSFailOverRemote Eoe1/GS card failover:
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.20 |
| eoe1GSEncapsulationRemote Eoe1/GS card encapsulation:
0:GFP
1:HDLC | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.21 |
| eoe1GSNetManageRemote Eoe1/GS Series card net manage:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.22 |
| eoe1GSFxModelRemote Eoe1/GS card SFP model:
0:No Model
1:OnLine | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.23 |
| eoe1GSFxSDRemote Eoe1/GS card fiber Signal Detection:
0:Fiber Unplugged
1:Signal Detected | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.24 |
| eoe1GSFxLaserRemote Eoe1/GS card fiber Laser status:
0:Normal
1:error | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.25 |
| eoe1GSFxLinkRemote Eoe1/GS card fiber link status:
0:Link Down
1:Link Up | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.26 |
| eoe1GSFxActiveRemote Eoe1/GS card fiber port active:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.27 |
| eoe1GSFxLaserOutputRemote Eoe1/GS card fiber Laser Output active:
0:disable
1:enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.28 |
| eoe1GSFxALSRemote Eoe1/GS card fiber Auto Laser Shutdown active:
0:OFF
1:ON | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.29 |
| eoe1GSCardHWVerRemote Eoe1/GS card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.3 |
| eoe1GSFxTagRemote Eoe1/GS card fiber Tag active:
0:UnTag
1:Tag
2:No Touch | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.31 |
| eoe1GSFxTagInsertRemote Eoe1/GS card fiber Tag Insert active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.32 |
| eoe1GSBandwidthFUNRemote Eoe1/GS card bandwidth mode:
1:disable(0),
2:32k*N(0~255)(1),
3:521k*N(0~200)(2), | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.33 |
| eoe1GSBandwidthRemote Eoe1/GS bandwidth:
bandwidth mode is 32k*N , The bandwidth is restricted to 0 ~ 255
bandwidth mode is 512k*N , The bandwidth is restricted to 0 ~ 200 | column | Integer32 | .1.3.6.1.4.1.4756.20.611.20.1.34 |
| eoe1GSBandwidthSpeedRemote Eoe1/GS bandwidthspeed: | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.611.20.1.35 |
| eoe1GSVlanFUNRemote Eoe1/GS card Vlan mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.36 |
| eoe1GSVlanIDRemote Eoe1/GS card VLAN ID:
The ID is restricted to 1 ~ 4095 | column | Integer32 | .1.3.6.1.4.1.4756.20.611.20.1.37 |
| eoe1GSRemoteLinkRemote Eoe1/GS card remote link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.38 |
| eoe1GSRemotePWRRemote Eoe1/GS card remote power status:
0:Normal
1:Power Off | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.39 |
| eoe1GSCardFWVerRemote Eoe1/GS card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.4 |
| eoe1GSRmonFUNRemote Eoe1/GS card Rmon mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.40 |
| eoe1GSRmonRxPKTClearRemote Eoe1/GS card rmon rx packet clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.41 |
| eoe1GSRmonRxByteClearRemote Eoe1/GS card rmon rx byte clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.42 |
| eoe1GSRmonRxPKTRemote Eoe1/GS card RMON Rx packet counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.43 |
| eoe1GSRmonRxByteRemote Eoe1/GS card RMON Rx byte counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.44 |
| eoe1GSFxDDVenderNameRemote Eoe1/GS card Fiber SFP Vender Name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.45 |
| eoe1GSFxDDVenderPartNoRemote Eoe1/GS card Fiber SFP Vender Part Number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.46 |
| eoe1GSFxDDSFPTypeRemote Eoe1/GS card Fiber SFP Vender Part Number.
0:Multi Mode
1:Single Mode
2:None | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.47 |
| eoe1GSFxDDWaveLength1Remote Eoe1/GS card Fiber SFP Wave Length 1. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.48 |
| eoe1GSFxDDWaveLength2Remote Eoe1/GS card Fiber SFP Wave Length 2. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.49 |
| eoe1GSCardCPLDVerRemote Eoe1/GS card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.5 |
| eoe1GSFxDDLinkLengthRemote Eoe1/GS card Fiber SFP Link Length. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.50 |
| eoe1GSFxDDModelIDRemote Eoe1/GS card Fiber SFP Model ID. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.51 |
| eoe1GSFxDDVersionRemote Eoe1/GS card Fiber SFP Model Version. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.52 |
| eoe1GSFxDDModelTypeRemote Eoe1/GS card Fiber SFP Model Type. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.53 |
| eoe1GSFxDDTxPowerRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Transmit Power. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.54 |
| eoe1GSFxDDRxPowerRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Receive Power. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.55 |
| eoe1GSFxDDRxSensRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Receive Sensitivity. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.56 |
| eoe1GSFxDDRxPwrMarginRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Receive Power Margin. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.57 |
| eoe1GSFxDDTempRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Temperature. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.58 |
| eoe1GSFxDDBIASRemote Eoe1/GS card Fiber SFP Digital/Diagnostic BIAS. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.59 |
| eoe1GSCardFPGAVerRemote Eoe1/GS card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.6 |
| eoe1GSFxDDVoltageRemote Eoe1/GS card Fiber SFP Digital/Diagnostic Voltage. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.611.20.1.60 |
| eoe1GSPortResetRemote Eoe1/GS card system status:
0:Off
1:Trigger | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.7 |
| eoe1GSSetToDefaultRemote Eoe1/GS card port set to default:
0:Off
1:Trigger | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.8 |
| eoe1GSLOSRemote Eoe1/GS card LOS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.611.20.1.9 |