eoe1GBandwidthLocal
CTC-FRM220-MIB ·
.1.3.6.1.4.1.4756.20.380.20.1.36
Object
column
r/w
Integer32
Eoe1/G Series bandwidth: bandwidth mode is 32k*N , The bandwidth is restricted to 0 ~ 255 bandwidth mode is 512k*N , The bandwidth is restricted to 0 ~ 200
Context
- MIB
- CTC-FRM220-MIB
- OID
.1.3.6.1.4.1.4756.20.380.20.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eoe1GLocalEntry
- Table
- eoe1GLocalTable
- Siblings
- 49
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoe1GChassisIndexLocal A unique value for each card.
It starts from 0 to 9 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.380.20.1.1 |
| eoe1GLOFLocal Eoe1/G Series card LOF status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.10 |
| eoe1GAISLocal Eoe1/G Series card AIS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.11 |
| eoe1GRAILocal Eoe1/G Series card RAI status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.12 |
| eoe1GCRCLocal Eoe1/G Series card CRC status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.13 |
| eoe1GBPVLocal Eoe1/G Series card BPV status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.14 |
| eoe1GLoopStatusLocal Eoe1/G Series card Loop status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.15 |
| eoe1GE1ModeLocal Eoe1/G Series card E1 mode:
0:Unframe
1:Frame | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.16 |
| eoe1GE1LoopBackLocal Eoe1/G Series card E1 loopback :
0:OFF
1:LLB
2:RLB | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.17 |
| eoe1GE1LoopDetectionLocal Eoe1/G Series card E1 loop detection:
0:Disable
1:Enalbe | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.18 |
| eoe1GE1HDLCLocal Eoe1/G Series card E1 HDLC:
0:Inverse
1:Consisten | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.19 |
| eoe1GSlotIndexLocal A unique value for each card.
It starts from 1 to 20 contiguously. | column | Integer32 | .1.3.6.1.4.1.4756.20.380.20.1.2 |
| eoe1GTimingSourceLocal Eoe1/G Series card timing source:
0:Recovery from E1 receive
1:Internal oscillator | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.20 |
| eoe1GFailOverLocal Eoe1/G Series card failover:
0:Disalbe
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.21 |
| eoe1GEncapsulationLocal Eoe1/G Series card encapsulation:
0:GFP
1:HDLC | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.22 |
| eoe1GNetManageLocal Eoe1/G Series card net manage:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.23 |
| eoe1GTagLocal Eoe1/G Series card tag mode:
0:Untag
1:tag
2:No Touch | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.24 |
| eoe1GInsertLocal Eoe1/G Series card insert mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.25 |
| eoe1GUtpLinkLocal Eoe1/G Series card UTP link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.26 |
| eoe1GUtpActiveLocal Eoe1/G Series card UTP port active:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.27 |
| eoe1GUtpNegoStatusLocal Eoe1/G Series card UTP negoiation status:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.28 |
| eoe1GUtpSpeedStatusLocal Eoe1/G Series card UTP speed status:
0:10M
1:100M | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.29 |
| eoe1GCardHWVerLocal Eoe1/G Series card hardware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.3 |
| eoe1GUtpDuplexStatusLocal Eoe1/G Series card UTP duplex status:
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.30 |
| eoe1GUtpNegoLocal Eoe1/G Series card UTP negoiation mode:
0:Manual
1:Auto | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.31 |
| eoe1GUtpSpeedLocal Eoe1/G Series card UTP speed mode:
0:10M
1:100M | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.32 |
| eoe1GUtpDuplexLocal Eoe1/G Series card UTP duplex mode:
0:Half
1:Full | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.33 |
| eoe1GUtpFlowControlLocal Eoe1/G Series card UTP flow control mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.34 |
| eoe1GBandwidthFUNLocal Eoe1/G Series card bandwidth mode:
1:disable(0),
2:32k*N(0~255)(1),
3:521k*N(0~200)(2), | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.35 |
| eoe1GBandwidthSpeedLocal Eoe1/G Series bandwidthspeed: | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4756.20.380.20.1.37 |
| eoe1GVlanFUNLocal Eoe1/G Series card Vlan mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.38 |
| eoe1GVlanIDLocal Eoe1/G Series card VLAN ID:
The ID is restricted to 1 ~ 4095 | column | Integer32 | .1.3.6.1.4.1.4756.20.380.20.1.39 |
| eoe1GCardFWVerLocal Eoe1/G Series card firmware version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.4 |
| eoe1GRemoteLinkLocal Eoe1/G Series card remote link status:
0:Down
1:Up | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.40 |
| eoe1GRemotePWRLocal Eoe1/G Series card remote power status:
0:Normal
1:Power Off | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.41 |
| eoe1GBertFUNLocal Eoe1/G Series card bert mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.42 |
| eoe1GBertClearLocal Eoe1/G Series card bert data clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.43 |
| eoe1GLSBToESLocal Eoe1/G) Series card, errored seconds of BERT result. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.380.20.1.44 |
| eoe1GLSBToSESLocal 5E1-ET100(T/S) Series card, severely errored seconds of BERT result. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4756.20.380.20.1.45 |
| eoe1GRmonFUNLocal Eoe1/G Series card Rmon mode:
0:Disable
1:Enable | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.46 |
| eoe1GRmonRxPKTClearLocal Eoe1/G Series card rmon rx packet clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.47 |
| eoe1GRmonRxByteClearLocal Eoe1/G Series card rmon rx byte clear:
0:Normal
1:Clear | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.48 |
| eoe1GRmonRxPKTLocal Eoe1/G Series card RMON Rx packet counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.49 |
| eoe1GCardCPLDVerLocal Eoe1/G Series card CPLD version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.5 |
| eoe1GRmonRxByteLocal Eoe1/G Series card RMON Rx byte counter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.50 |
| eoe1GCardFPGAVerLocal Eoe1/G Series card FPGA version x.xxx | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4756.20.380.20.1.6 |
| eoe1GPortResetLocal Eoe1/G Series card system status:
0:Off
1:Trigger | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.7 |
| eoe1GSetToDefaultLocal Eoe1/G Series card port set to default:
0:Off
1:Trigger | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.8 |
| eoe1GLOSLocal Eoe1/G Series card LOS status:
0:No
1:Yes | column | Enumeration | .1.3.6.1.4.1.4756.20.380.20.1.9 |