els10-27VlanAccessList
CT-ELS10-MIB ·
.1.3.6.1.4.1.97.9.20.5
Object
scalar
mandatory
r/w
Integer32
A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared database that will automatically be kept by the firmware. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the VLAN bridge is represented by single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'
Context
- MIB
- CT-ELS10-MIB
- OID
.1.3.6.1.4.1.97.9.20.5- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- els10-27VlanBridgeConfig
- Siblings
- 5
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| els10-27VlanVersionNumber mandatory Specifies the version IEEE 802.1Q VLAN that has been implemented to. | scalar | Integer32 | .1.3.6.1.4.1.97.9.20.1 |
| els10-27VlanOperatingMode mandatory Selects the mode of operation. The switch can operate as simply an 802.1d switch,
or an 802.1d switch with IEEE VLAN capability (802.1Q). A read of this object will return
the c… | scalar | Enumeration | .1.3.6.1.4.1.97.9.20.2 |
| els10-27VlanResetDefaults mandatory To reset the specified bridge. The filtering database is cleared and initialized
with the entries specified in the Permananent database, and the Bridge protocol Entity is
initial… | scalar | Enumeration | .1.3.6.1.4.1.97.9.20.3 |
| els10-27VlanGVRPEnable mandatory If the switch is operating in 802.1Q mode, this selects whether GVRP protocol
messages should be processed and VLANs configured accordingly for each
port on the switch. Each octet… | scalar | Enumeration | .1.3.6.1.4.1.97.9.20.4 |
| els10-27VlanConfigVlan | node | - | .1.3.6.1.4.1.97.9.20.6 |