ctDAWanDeviceCurrentBandwidth
CT-DAWAN-MIB ·
.1.3.6.1.4.1.52.4497.16.2.1.10
Object
This is the aggregate bandwidth of all current connections.
Context
- MIB
- CT-DAWAN-MIB
- OID
.1.3.6.1.4.1.52.4497.16.2.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ctDAWanDeviceEntry
- Table
- ctDAWanDevicesTable
- Siblings
- 23
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctDAWanDeviceIndex mandatory This is the index into this table. This index
uniquely identifies the device. | column | Integer32 | .1.3.6.1.4.1.52.4497.16.2.1.1 |
| ctDAWanDeviceInitialBandwidth mandatory This is the desired initial bandwidth in bits per second used
when calling this peer object. The system will bring up enough
connections to meet the bandwidth requirement. The … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.11 |
| ctDAWanDeviceMaxBandwidth mandatory This is the maximum amount of bandwidth in bits per seconde used when
calling this peer wan device object. This value only represents dial
type connections. It does not include… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.12 |
| ctDAWanDeviceH0Support mandatory Indicates whether an H0 connection can be used when calling this
peer wan device object. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.13 |
| ctDAWanDeviceChargedUnits mandatory The total number of charging units applying to this
peer device since this row was created. Only the
charging units applying to the local interface,i.e.
for originated calls or … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.14 |
| ctDAWanDeviceSuccessCalls mandatory Number of completed calls to this peer device. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.15 |
| ctDAWanDeviceFailCalls mandatory Number of failed call attempts to this peer device since the
row was created. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.16 |
| ctDAWanDeviceAcceptCalls mandatory Number of calls from this peer device accepted since the
row was created. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.17 |
| ctDAWanDeviceRefuseCalls mandatory Number of calls from this peer device refused since the
row was created. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.18 |
| ctDAWanDeviceConnectTime mandatory The value of sysUpTime at the time when the device entered
its current active state. This object will be 0 if the
device is currently inactive. This object will be upctDAted wh… | column | TimeStamp | .1.3.6.1.4.1.52.4497.16.2.1.19 |
| ctDAWanDeviceIfIndex mandatory This is the ifIndex value of the wan connection group.
If the ifIndex value is unknown, the value of this object
will be zero. | column | Integer32 | .1.3.6.1.4.1.52.4497.16.2.1.2 |
| ctDAWanDeviceConnectDirection mandatory The direction from which the last connect occurred. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.20 |
| ctDAWanDeviceLastDisconnectTime mandatory The value of sysUpTime when the last call to this peer
device was disconnected. This object will be upctDAted whenever
a call is disconnected. | column | TimeStamp | .1.3.6.1.4.1.52.4497.16.2.1.21 |
| ctDAWanDeviceLastDisconnectDirection mandatory The direction from which the last disconnect occurred. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.22 |
| ctDAWanDeviceLastDisconnectCause mandatory The encoded network cause value associated with the last call. This object
will be upctDAted whenever a call is started or cleared. The value of this
object will depend on the i… | column | OctetString | .1.3.6.1.4.1.52.4497.16.2.1.23 |
| ctDAWanDeviceLastDisconnectText mandatory ASCII text describing the reason for the last call termination. This object
exists because it would be impossible for a management station to store all
possible cause values for… | column | OctetString | .1.3.6.1.4.1.52.4497.16.2.1.24 |
| ctDAWanDeviceSessionID mandatory This is the unique identifier of the last session
when a wan device was in the active state. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.52.4497.16.2.1.3 |
| ctDAWanDeviceState mandatory This is the state of the device. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.4 |
| ctDAWanDeviceDescr mandatory A textual string that identifies the peer device. | column | OctetString | .1.3.6.1.4.1.52.4497.16.2.1.5 |
| ctDAWanDeviceConnectControl mandatory This object controls the desired state of the wan device.
Setting this object to connect(1) will initiate the
set of actions to bring the wan device to the active
state. Only… | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.6 |
| ctDAWanDeviceConnectType mandatory This specifies the type of the wan connection. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.7 |
| ctDAWanDeviceL2Encapsulation mandatory This is the type of layer 2 encapsulation used when
connecting to this device. | column | Enumeration | .1.3.6.1.4.1.52.4497.16.2.1.8 |
| ctDAWanDeviceNumConnections mandatory This is the current number of wan connections
to this device. | column | Integer32 | .1.3.6.1.4.1.52.4497.16.2.1.9 |