ipTunnelIfConfigID

CROUTE-MIB · .1.3.6.1.4.1.81.31.8.1.1.6
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
An identifier used to distinguish between multiple 
tunnels of the same encapsulation method, with the 
same endpoints. If the encapsulation protocol only 
allows one tunnel per set of endpoint addresses 
(such as for GRE or IP-in-IP), the value of this 
object is 1.  For encapsulation methods (such as 
L2F) which allow multiple parallel tunnels, the 
manager is responsible for choosing any ID which 
does not conflict with an existing row, such as 
choosing a random number.

Context

MIB
CROUTE-MIB
OID
.1.3.6.1.4.1.81.31.8.1.1.6
Type
column
Access
readwrite
Status
current
Parent
ipTunnelEntry
Table
ipTunnelTable
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipTunnelIfIndex
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of t…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.1
ipTunnelIfChecksum
Verifying checksum of the GRE header. 1 - Check the checksum. 2 - Do not check the checksum. In case of checksum calaculation does not match to the packet checksum the packet is …
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.10
ipTunnelIfKey
The Shared Key for the GRE Tunnel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.11
ipTunnelIfKeyMode
The mode according which the Key field is checked or not. 1 - Enable Key 2 - Disable Key
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.12
ipTunnelIfOutOfOrderDrop
1 - Drop the packets in case of out of order packets. 2 - Do not Drop the packets in case of out of order packets.
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.13
ipTunnelIfAgingTimer
The timer (minutes) for aging of path MTU discovery. 0 - Disable aging is done.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.14
ipTunnelIfMTUDiscovery
Path MTU discovery. 1 - Enable Path MTU discovery. 2 - Disable Path MTU discovery.
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.15
ipTunnelIfMTU
mandatory GRE Tunnel MTU Value (Bytes)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.16
ipTunnelIfKeepAliveRetries
The number of times that a device will keep sending keepalive packets without a response before the interface becomes inactive. This item is changeable only when ipTunnelIfKeepAl…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.17
ipTunnelIfKeepAliveRate
The rate at which the keepalive packets are sent in seconds. I.e. One keepalive packet will be send in ipTunnelIfKeepAliveRate seconds. If ipTunnelIfKeepAliveRate=0 Then Keepalive…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.8.1.1.18
ipTunnelIfStatus
For adding and deleting IP Tunnel interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II).
columnRowStatus.1.3.6.1.4.1.81.31.8.1.1.2
ipTunnelIfLocalAddress
The address of the local endpoint of the tunnel, or 0.0.0.0 if the device is free to choose any of its addresses at tunnel establishment time.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.31.8.1.1.3
ipTunnelIfRemoteAddress
The address of the remote endpoint of the tunnel.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.31.8.1.1.4
ipTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.5
ipTunnelIfHopLimit
The TTL to use in the outer IP header.
columnInteger32.1.3.6.1.4.1.81.31.8.1.1.7
ipTunnelIfSecurity
The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. …
columnEnumeration.1.3.6.1.4.1.81.31.8.1.1.8
ipTunnelIfDSCP
The method used to set the high 6 bits of the TOS in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value between 0 and 63 i…
columnInteger32.1.3.6.1.4.1.81.31.8.1.1.9