ipCidrRouteStaticActive
CROUTE-MIB ·
.1.3.6.1.4.1.81.31.1.22.1.12
Object
column
Enumeration
The status of the route. If it is active then it is found on the routing database and affect traffic else it is no found on the routing database and does not affect traffic.
Context
- MIB
- CROUTE-MIB
- OID
.1.3.6.1.4.1.81.31.1.22.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipCidrRouteStaticEntry
- Table
- ipCidrRouteStaticTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | yes |
2 | no |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipCidrRouteStaticDest The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of … | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.1.22.1.1 |
| ipCidrRouteStaticPermanent This MIB item conveys additional information about the route.
Permanent(1) - Permanent Static route which is still active even if the next hop is down.
Non-Permanent(2) - Non-Per… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.1.22.1.10 |
| ipCidrRouteStaticTrackId Bind the status of this static route to an object-tracker by specifying
the ID of the object-tracker (avstrTrackerId in
AVAYA-SAA-TRACK-MIB).
A value of 0 means that the static r… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.81.31.1.22.1.11 |
| ipCidrRouteStaticRowStatus The row status variable, used according to
row installation and removal conventions.
The values that are supported are destroy, create-and-wait,create-and-go, active. | column | RowStatus | .1.3.6.1.4.1.81.31.1.22.1.13 |
| ipCidrRouteStaticMask Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the ipCidrRouteStaticDest field. For
those systems that do no… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.1.22.1.2 |
| ipCidrRouteStaticIfIndex The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
Note that for regular static routes and for discard routes … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.1.22.1.3 |
| ipCidrRouteStaticNextHop On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.
Note that for Via interface/DHCP static routes the next-hop is 0.0.0.0. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.1.22.1.4 |
| ipCidrRouteStaticPreference Preference of the static route.
high(0) - High priority route.
low(250) - low priority route.
In case of Discard route the preference is high(0). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.1.22.1.5 |
| ipCidrRouteStaticUsedIfIndex The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
When creating regular static route then there is no informa… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.1.22.1.6 |
| ipCidrRouteStaticUsedNextHop On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.
When creating DHCP static route using the default router as next hop then when creating
this route… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.1.22.1.7 |
| ipCidrRouteStaticType Type of the static route.
via (1), -- Via interface static route
discard (2), -- route which discards traffic
dhcp (3), -- Static route using DHCP client next hop.
regu… | column | Enumeration | .1.3.6.1.4.1.81.31.1.22.1.8 |
| ipCidrRouteStaticCost The static route cost. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.1.22.1.9 |