drIpInterfaceStatus

CROUTE-MIB · .1.3.6.1.4.1.81.31.6.1.1.9

MIB view Table view

Object

column r/w RowStatus

For adding and deleting IP interfaces. 
Deleting this row means deleting the 
corresponding entry in IpAddrTable (MIB II). 
Deleting an IP interface also causes deletion
of all static routes defined on this IP 
interface, as well as protocol interfaces
(e.g. RIP and OSPF) defined on 
this IP interface.

Context

MIB: CROUTE-MIB
OID: .1.3.6.1.4.1.81.31.6.1.1.9
Type: column
Access: readwrite
Status: current
Parent: drIpInterfaceEntry
Table: drIpInterfaceTable
Siblings: 15

Syntax

RowStatus

Source: RowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
drIpInterfaceSlot The slot number of the module	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.81.31.6.1.1.1`
drIpInterfaceMainRouterAddr The IP address of the main router backed up on this interface.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.31.6.1.1.10`
drIpInterfaceARPServerStatus Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the …	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.11`
drIpInterfaceName The name of this interface for compatibility with cli.	column	OctetString	`.1.3.6.1.4.1.81.31.6.1.1.12`
drIpInterfaceNetbiosRebroadcast How to deal with NETBIOS Broadcasts. inbound - netbios broadcasts received from the interface are rebarodcasted outbound - netbios broadcastrs are rebraodcasted t…	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.13`
drIpInterfaceIcmpRedirects enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending o…	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.14`
drIpInterfaceOperStatus The operational status of this interface. up - the interface is active. down - the interface is inactive.	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.15`
drIpInterfaceDhcpRelay enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP interface is define…	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.16`
drIpInterfaceAddr The IP address to which this entry's addressing information pertains.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.31.6.1.1.2`
drIpInterfaceNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	column	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.81.31.6.1.1.3`
drIpInterfaceLowerIfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-vola…	column	OctetString	`.1.3.6.1.4.1.81.31.6.1.1.4`
drIpInterfaceType The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.5`
drIpInterfaceForwardIpBroadcast Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.6`
drIpInterfaceBroadcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For exampl…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.81.31.6.1.1.7`
drIpInterfaceProxyArp When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The …	column	Enumeration	`.1.3.6.1.4.1.81.31.6.1.1.8`