drIpInterfaceDhcpRelay
CROUTE-MIB ·
.1.3.6.1.4.1.81.31.6.1.1.16
Object
column
r/w
Enumeration
enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP interface is defined will be defined. disable - disablesenable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface.
Context
- MIB
- CROUTE-MIB
- OID
.1.3.6.1.4.1.81.31.6.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- drIpInterfaceEntry
- Table
- drIpInterfaceTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| drIpInterfaceSlot The slot number of the module | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.6.1.1.1 |
| drIpInterfaceMainRouterAddr The IP address of the main router backed up
on this interface. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.6.1.1.10 |
| drIpInterfaceARPServerStatus Whenever to activate the ARP Server
mechanism on this interface.
enable - set by the user,
means activate the ARP Server
mechanism over this IP interface.
disable - set by the … | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.11 |
| drIpInterfaceName The name of this interface for compatibility
with cli. | column | OctetString | .1.3.6.1.4.1.81.31.6.1.1.12 |
| drIpInterfaceNetbiosRebroadcast How to deal with NETBIOS Broadcasts.
inbound - netbios broadcasts received from the
interface are rebarodcasted
outbound - netbios broadcastrs are rebraodcasted
t… | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.13 |
| drIpInterfaceIcmpRedirects enable - enable the sending of redirect
messages if the router is forced to
re-send a packet through the same
interface on which it was received.
disable - disable the sending o… | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.14 |
| drIpInterfaceOperStatus The operational status of this interface.
up - the interface is active.
down - the interface is inactive. | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.15 |
| drIpInterfaceAddr The IP address to which this entry's
addressing information pertains. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.6.1.1.2 |
| drIpInterfaceNetMask The subnet mask associated with the IP
address of this entry.
The value of the mask is an IP address with
all the network bits
set to 1 and all the hosts bits set to 0. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.81.31.6.1.1.3 |
| drIpInterfaceLowerIfAlias This object is an 'alias' name for the
lower-layer interface on top
of which this IP interface is defined. The
alias is specified by the network manager, and
provides a non-vola… | column | OctetString | .1.3.6.1.4.1.81.31.6.1.1.4 |
| drIpInterfaceType The logical type of the interface. The default
depends on the physical type.
For example Ethernet and Token-Ring LANs are
of type broadcast | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.5 |
| drIpInterfaceForwardIpBroadcast Whether the router forwards IP directed
broadcasts that are to be transmitted as
link-layer broadcast to an attached net
or subnet. | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.6 |
| drIpInterfaceBroadcastAddr The value of the least-significant bit in
the IP broadcast address used
for sending datagrams on the (logical)
interface associated with the IP address of
this entry.
For exampl… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.81.31.6.1.1.7 |
| drIpInterfaceProxyArp When proxy ARP is enabled, the router
responds to ARP requests received on one
link-layer interface for an IP-address
that is reachable via another link-layer
interface.
The … | column | Enumeration | .1.3.6.1.4.1.81.31.6.1.1.8 |
| drIpInterfaceStatus For adding and deleting IP interfaces.
Deleting this row means deleting the
corresponding entry in IpAddrTable (MIB II).
Deleting an IP interface also causes deletion
of all st… | column | RowStatus | .1.3.6.1.4.1.81.31.6.1.1.9 |