drIpInterfaceBroadcastAddr

CROUTE-MIB · .1.3.6.1.4.1.81.31.6.1.1.7
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
The value of the least-significant bit in 
the IP broadcast address used
for sending datagrams on the (logical) 
interface associated with the IP address of
this entry.
For example, when the Internet standard 
all-ones broadcast address is
used, the value will be 1. This value
applies to both the subnet and network
broadcasts addresses used by the entity on
this (logical) interface.

Context

MIB
CROUTE-MIB
OID
.1.3.6.1.4.1.81.31.6.1.1.7
Type
column
Access
readwrite
Status
current
Parent
drIpInterfaceEntry
Table
drIpInterfaceTable
Siblings
15

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
drIpInterfaceSlot
The slot number of the module
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.81.31.6.1.1.1
drIpInterfaceMainRouterAddr
The IP address of the main router backed up on this interface.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.31.6.1.1.10
drIpInterfaceARPServerStatus
Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the …
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.11
drIpInterfaceName
The name of this interface for compatibility with cli.
columnOctetString.1.3.6.1.4.1.81.31.6.1.1.12
drIpInterfaceNetbiosRebroadcast
How to deal with NETBIOS Broadcasts. inbound - netbios broadcasts received from the interface are rebarodcasted outbound - netbios broadcastrs are rebraodcasted t…
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.13
drIpInterfaceIcmpRedirects
enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending o…
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.14
drIpInterfaceOperStatus
The operational status of this interface. up - the interface is active. down - the interface is inactive.
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.15
drIpInterfaceDhcpRelay
enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP interface is define…
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.16
drIpInterfaceAddr
The IP address to which this entry's addressing information pertains.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.31.6.1.1.2
drIpInterfaceNetMask
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.81.31.6.1.1.3
drIpInterfaceLowerIfAlias
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-vola…
columnOctetString.1.3.6.1.4.1.81.31.6.1.1.4
drIpInterfaceType
The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.5
drIpInterfaceForwardIpBroadcast
Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.6
drIpInterfaceProxyArp
When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The …
columnEnumeration.1.3.6.1.4.1.81.31.6.1.1.8
drIpInterfaceStatus
For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all st…
columnRowStatus.1.3.6.1.4.1.81.31.6.1.1.9