cpqMeAlarmOwner
CPQTHRSH-MIB ·
.1.3.6.1.4.1.232.10.2.2.2.1.10
Object
column
mandatory
r/w
OctetString
The entity that configured this entry and is
therefore using the resources assigned to it.
This string is used to model an administratively
assigned name of the owner of a resource. This
information is taken from the NVT ASCII character set.
It is suggested that this name contain one or more
of the following:
IP address, management station name, network manager's
name, location, or phone number.
In some cases the agent itself will be the owner of
an entry. In these cases, this string shall be set
to a string starting with 'monitor'.
SNMP access control is articulated entirely in terms of
the contents of MIB views; access to a particular SNMP
object instance depends only upon its presence or
absence in a particular MIB view and never upon its
value or the value of related object instances. Thus,
objects of this type afford resolution of resource
contention only among cooperating managers; they
realize no access control function with respect
to uncooperative parties.
Context
- MIB
- CPQTHRSH-MIB
- OID
.1.3.6.1.4.1.232.10.2.2.2.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- cpqMeAlarmEntry
- Table
- cpqMeAlarmTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqMeAlarmIndex mandatory An index that uniquely identifies an entry in the
cpqMeAlarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device. | column | Integer32 | .1.3.6.1.4.1.232.10.2.2.2.1.1 |
| cpqMeAlarmStatus mandatory The status of this alarm entry.
Setting this object to the value invalid(4) has the
effect of invalidating the corresponding entry.
That is, it effectively disassoc… | column | Enumeration | .1.3.6.1.4.1.232.10.2.2.2.1.11 |
| cpqMeAlarmSeverity mandatory This is used to correlate the severity of a particular alarm
entry. The management console can use this to relate the
severity of an alarm entry to the end user. | column | Enumeration | .1.3.6.1.4.1.232.10.2.2.2.1.12 |
| cpqMeAlarmExtendedDescription mandatory This string contains meaningful information about the MIB
variable which has the threshold set upon it. This information
will be bound to a trap and is intended to allow a manage… | column | OctetString | .1.3.6.1.4.1.232.10.2.2.2.1.13 |
| cpqMeAlarmInterval mandatory The interval, in seconds, between consecutive samples of
the data. When setting this variable, care should be given
to ensure that the variable being monitored will not exceed
2^… | column | Integer32 | .1.3.6.1.4.1.232.10.2.2.2.1.2 |
| cpqMeAlarmVariable mandatory The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may
be s… | column | ObjectIdentifier | .1.3.6.1.4.1.232.10.2.2.2.1.3 |
| cpqMeAlarmSampleType mandatory The method of sampling the selected variable and
calculating the value to be compared against the
thresholds.
If the sample type (cpqMeAlarmSampleType) is
absoluteV… | column | Enumeration | .1.3.6.1.4.1.232.10.2.2.2.1.4 |
| cpqMeAlarmValue mandatory The value of the object identifier (cpqMeAlarmVariable)
during the last sampling period. The value during the
current sampling period is not made available until
the period is co… | column | Integer32 | .1.3.6.1.4.1.232.10.2.2.2.1.5 |
| cpqMeAlarmStartupAlarm mandatory The alarm that may be sent when this entry is first
set to valid.
If the sample type (cpqMeAlarmSampleType) is
absoluteValue(1), then the following comparisons are
… | column | Enumeration | .1.3.6.1.4.1.232.10.2.2.2.1.6 |
| cpqMeAlarmRisingThreshold mandatory A threshold for the sampled object identifier
(cpqMeAlarmVariable).
If the sample type (cpqMeAlarmSampleType) is
absoluteValue(1), then the following describes the
… | column | Integer32 | .1.3.6.1.4.1.232.10.2.2.2.1.7 |
| cpqMeAlarmFallingThreshold mandatory A threshold for the sampled object identifier
(cpqMeAlarmVariable).
If the sample type (cpqMeAlarmSampleType) is
absoluteValue(1), then the following describes the
… | column | Integer32 | .1.3.6.1.4.1.232.10.2.2.2.1.8 |
| cpqMeAlarmPermanence mandatory This specifies if the threshold management software should
recreate this entry if it is brought down and then
restarted. A temporary entry will not be recreated after a
restart. … | column | Enumeration | .1.3.6.1.4.1.232.10.2.2.2.1.9 |