cpqSsBoxSidePanelStatus
CPQSTSYS-MIB ·
.1.3.6.1.4.1.232.8.2.1.1.10
Object
column
mandatory
Enumeration
Drive Box Side Panel Status.
This value will be one of the following:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
sidePanelInPlace(2)
The side panel is properly installed on the storage system.
sidePanelRemoved(3)
The side panel is not properly installed on the storage system.
noSidePanelStatus(4)
This unit does not support side panel status monitoring.
Context
- MIB
- CPQSTSYS-MIB
- OID
.1.3.6.1.4.1.232.8.2.1.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqSsDrvBoxEntry
- Table
- cpqSsDrvBoxTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | sidePanelInPlace |
3 | sidePanelRemoved |
4 | noSidePanelStatus |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqSsBoxCntlrIndex mandatory Drive Box Controller Index.
The controller index indicates to which adapter card instance
this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.8.2.1.1.1 |
| cpqSsBoxFltTolPwrSupplyStatus mandatory This value specifies the overall status of the fault tolerant
power supply sub-system in a drive box.
This value will be one of the following:
other(1)
The power s… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.11 |
| cpqSsBoxBackPlaneVersion mandatory Drive Box Back Plane Version.
This is the version of the drive box back plane. The following
types are defined:
other(1)
The agent does n… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.12 |
| cpqSsBoxTotalBays mandatory Drive Box Total Bays.
This is the total number of bays in this storage system. If the
value cannot be determined or does not apply, -1 is returned. | column | Integer32 | .1.3.6.1.4.1.232.8.2.1.1.13 |
| cpqSsBoxPlacement mandatory Drive Box Placement.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
located internal or ex… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.14 |
| cpqSsBoxDuplexOption mandatory Drive Box Duplex Option.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
duplexed.
… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.15 |
| cpqSsBoxBoardRevision mandatory Drive Box Board Revision.
This is the board revision of this storage system backplane. | column | Integer32 | .1.3.6.1.4.1.232.8.2.1.1.16 |
| cpqSsBoxSerialNumber mandatory Drive Box Serial Number.
This is the drive box`s serial number which is normally display
on the front panel. This can be used for identification
purposes. If the b… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.17 |
| cpqSsBoxCntlrHwLocation mandatory A text description of the hardware location of the controller
to which this box is attached. A NULL string indicates that
the hardware location could not be determined or is irre… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.18 |
| cpqSsBoxBackplaneSpeed mandatory Drive Box Backplane Speed.
The following values are defined:
other(1)
The agent is unable to determine the backplane speed for this
storage syste… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.19 |
| cpqSsBoxBusIndex mandatory Drive Box Bus Index.
The bus index indicates to which bus instance on an adapter card
this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.8.2.1.1.2 |
| cpqSsBoxConnectionType mandatory Drive Box Connection Type.
The following values are defined:
other(1)
The agent is unable to determine the type of connection to
this storage sys… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.20 |
| cpqSsBoxHostConnector mandatory Drive Box Host Connector.
This is the host connector to which the drive box is attached.
If the host connector cannot be determined, the agent will
return a NULL st… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.21 |
| cpqSsBoxBoxOnConnector mandatory Drive Box, Box on Connector.
The box on connector indicates which box instance this table
entry belongs. The instances start at one and increment for
each box atta… | column | Integer32 | .1.3.6.1.4.1.232.8.2.1.1.22 |
| cpqSsBoxLocationString mandatory Drive Box Location String.
This string describes the location of the drive box in relation
to the controller to which it is attached. If the location
string cannot… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.23 |
| cpqSsBoxInitiatorSasAddress mandatory Drive Box Initiator SAS Address String.
This string describes the SAS address of the initiator connected
to the drive box. If the drive box initiator SAS address s… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.24 |
| cpqSsBoxTargetSasAddress mandatory Drive Box Target SAS Address String.
This string describes the SAS address of the target (i.e. the
drive box itself). If the drive box target SAS address string
c… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.25 |
| cpqSsBoxLocalManageIpAddress mandatory Drive Box Local Management IP Address String.
This string reports the management IP address for the
storage box primary controller. If the drive box local manageme… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.26 |
| cpqSsBoxPartnerManageIpAddress mandatory Drive Box Partner Management IP Address String.
This string reports the management IP address for the
storage box partner controller. If the drive box partner mana… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.27 |
| cpqSsBoxConnectionStatus mandatory Drive Box Connection Status.
The following values are defined:
other(1)
The agent is unable to determine the storage system`s
connection status… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.28 |
| cpqSsBoxTargetBasedManagement mandatory Drive Box Target Based Management.
The following values are defined:
other(1)
The agent is unable to determine if this storage system
supports… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.29 |
| cpqSsBoxType obsolete Drive Box Type.
This is the type of drive box. The following types are defined:
other(1)
The agent does not recognize this drive storage s… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.3 |
| cpqSsBoxGSIStatus mandatory Drive Box GSI Status.
This is the status based on the stateof the
Global Service Indicator.
The following values are defined:
other(1)
The … | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.30 |
| cpqSsBoxGSIMessages mandatory Drive Box GSI Messages.
This string will contain any error message from the drive box
describing why the Global Service Indicator is set.
Please refer to User Docum… | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.31 |
| cpqSsBoxModel mandatory Drive Box Model.
This is a description of the drive box`s model.
This can be used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.4 |
| cpqSsBoxFWRev mandatory Drive Box Firmware Revision.
This is the revision level of the drive box.
This can be used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.5 |
| cpqSsBoxVendor mandatory Drive Box Vendor
This is the drive box`s vendor name.
This can be used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.8.2.1.1.6 |
| cpqSsBoxFanStatus mandatory Drive Box Fan Status.
This is the current status of the fans in the drive box.
This value will be one of the following:
other(1)
Fan monitoring is not suppo… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.7 |
| cpqSsBoxCondition mandatory SCSI Drive Box Condition.
This is the overall condition of the drive box.
The following values are defined:
other(1)
The agent does not rec… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.8 |
| cpqSsBoxTempStatus mandatory The temperature of the drive system.
This value will be one of the following:
other(1)
Temperature monitoring is not supported by this system
or it is not suppo… | column | Enumeration | .1.3.6.1.4.1.232.8.2.1.1.9 |