cpqSsBackplaneTempStatus
CPQSTSYS-MIB ·
.1.3.6.1.4.1.232.8.2.2.6.1.11
Object
column
mandatory
Enumeration
Storage System Backplane Fan Status.
This value will be one of the following:
other(1)
The agent is unable to determine if this storage system has
temperature monitoring.
noTemp(2)
This unit does not support temperature monitoring.
ok(3)
The temperature is within normal operating range.
degraded(4)
The temperature is outside of normal operating range.
failed(5)
The temperature could permanently damage the system.
notSupported(6)
The storage system does not support reporting temperature
status through this backplane. The temperature status is
reported through the first backplane on this storage system.
Context
- MIB
- CPQSTSYS-MIB
- OID
.1.3.6.1.4.1.232.8.2.2.6.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqSsBackplaneEntry
- Table
- cpqSsBackplaneTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | noTemp |
3 | ok |
4 | degraded |
5 | failed |
6 | notSupported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqSsBackplaneChassisIndex mandatory Storage System Backplane Chassis Index.
The chassis index uniquely identifies a storage system chassis. | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.1 |
| cpqSsBackplaneFanStatus mandatory Storage System Backplane Fan Status.
This is the current status of the fans in the storage system.
This value will be one of the following:
other(… | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.10 |
| cpqSsBackplaneFtpsStatus mandatory Storage System Backplane Fault Tolerant Power Supply Status.
This value specifies the overall status of the redundant power
supply in a drive box. This value will … | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.12 |
| cpqSsBackplaneSerialNumber mandatory Storage System Backplane Serial Number.
This is the storage system backplane serial number which is normally
displayed on the front bezel. This can be used for ide… | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.13 |
| cpqSsBackplanePlacement mandatory Storage System Backplane Placement.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
located… | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.14 |
| cpqSsBackplaneBoardRevision mandatory Storage System Backplane Board Revision.
This is the board revision of this storage system backplane. | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.15 |
| cpqSsBackplaneSpeed mandatory Storage System Backplane Speed.
The following values are defined:
other(1)
The agent is unable to determine the backplane speed for this
storage … | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.16 |
| cpqSsBackplaneConnectionType mandatory Backlane Box Connection Type.
The following values are defined:
other(1)
The agent is unable to determine the type of connection to
this backplan… | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.17 |
| cpqSsBackplaneConnector mandatory Backplane Connector.
This is the connector to which the backplane is attached.
If the backplane connector cannot be determined, the agent will
return a NULL string. | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.18 |
| cpqSsBackplaneOnConnector mandatory Backplane on Connector.
The backplane on connector indicates to which backplane instance
this table entry belongs. The instances start at one and
increment for eac… | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.19 |
| cpqSsBackplaneIndex mandatory Storage System Backplane Index.
This index uniquely identifies a storage system backplane. | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.2 |
| cpqSsBackplaneLocationString mandatory Backplane Location String.
This string describes the location of the backplane in relation
to the controller to which it is attached. If the location
string cannot… | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.20 |
| cpqSsBackplaneFWRev mandatory Storage System Backplane Firmware Revision.
This is the revision level of storage system backplane. | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.3 |
| cpqSsBackplaneDriveBays mandatory Storage System Backplane Drive Bays.
This is the number of bays on this storage system backplane. | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.4 |
| cpqSsBackplaneDuplexOption mandatory Storage System Backplane Duplex Option.
The following values are defined:
other (1)
The agent is unable to determine if this storage
… | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.5 |
| cpqSsBackplaneCondition mandatory Storage System Backplane Condition.
This is the overall condition of the backplane.
The following values are defined:
other(1)
The agent do… | column | Enumeration | .1.3.6.1.4.1.232.8.2.2.6.1.6 |
| cpqSsBackplaneVersion mandatory Storage System Backplane Version.
This is the version of the drive box back plane. | column | Integer32 | .1.3.6.1.4.1.232.8.2.2.6.1.7 |
| cpqSsBackplaneVendor mandatory Storage System Backplane Vendor
This is the storage box`s vendor name.
This can be used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.8 |
| cpqSsBackplaneModel mandatory Storage System Backplane Model.
This is a description of the storage system`s model.
This can be used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.8.2.2.6.1.9 |