cpqiScsiNodeNodeIndex
CPQISCSI-MIB ·
.1.3.6.1.4.1.232.169.2.6.1.1.2
Object
An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.
Context
- MIB
- CPQISCSI-MIB
- OID
.1.3.6.1.4.1.232.169.2.6.1.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqiScsiNodeAttributesEntry
- Table
- cpqiScsiNodeAttributesTable
- Siblings
- 16
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqiScsiNodeInstIndex mandatory An arbitrary integer used to uniquely identify a particular
iSCSI instance. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.169.2.6.1.1.1 |
| cpqiScsiNodeFirstBurstLength mandatory The maximum length (bytes) supported for unsolicited data
to/from this node. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.10 |
| cpqiScsiNodeMaxBurstLength mandatory The maximum number of bytes which can be sent within
a single sequence of Data-In or Data-Out PDUs. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.11 |
| cpqiScsiNodeMaxConnections mandatory The maximum number of connections allowed in each
session to and/or from this node. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.12 |
| cpqiScsiNodeDataSequenceInOrder mandatory The DataSequenceInOrder preference of this node.
False (=No) indicates that iSCSI data PDU sequences may
be transferred in any order. True (=Yes) indicates that
data PDU sequence… | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.13 |
| cpqiScsiNodeDataPDUInOrder mandatory The DataPDUInOrder preference of this node.
False (=No) indicates that iSCSI data PDUs within sequences
may be in any order. True (=Yes) indicates that data PDUs
within sequences… | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.14 |
| cpqiScsiNodeDefaultTime2Wait mandatory The DefaultTime2Wait preference of this node.
This is the minimum time, in seconds, to wait before attempting
an explicit/implicit logout or active task reassignment after
an unex… | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.15 |
| cpqiScsiNodeDefaultTime2Retain mandatory The DefaultTime2Retain preference of this node.
This is the maximum time, in seconds after an initial wait
(Time2Wait), before which an active task reassignment is still
possible … | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.16 |
| cpqiScsiNodeErrorRecoveryLevel mandatory The ErrorRecoveryLevel preference of this node.
Currently, only 0-2 are valid.
This object is designed to accommodate future error recover
levels.
Higher error recovery levels imp… | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.17 |
| cpqiScsiNodeName mandatory A character string that is a globally unique identifier for
this iSCSI node. The node name is independent of the location
of the node, and can be resolved into a set of addresses… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.169.2.6.1.1.3 |
| cpqiScsiNodeAlias mandatory A character string that is a human-readable name or
description of the iSCSI node. If configured, this alias
may be communicated to the initiator or target node at
the remote end… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.169.2.6.1.1.4 |
| cpqiScsiNodeRoles mandatory A node can operate in one or both of two roles:
a target role and/or an initiator role. If the node
will operate in both roles, both bits must be set.
When a new cp… | column | OctetString | .1.3.6.1.4.1.232.169.2.6.1.1.5 |
| cpqiScsiNodeTransportType mandatory A pointer to the corresponding scsiTrnspt object in
the SCSI MIB (which in turn points to this iSCSI node)
allowing management stations to locate the SCSI-level
Device that is rep… | column | ObjectIdentifier | .1.3.6.1.4.1.232.169.2.6.1.1.6 |
| cpqiScsiNodeInitialR2T mandatory This object indicates the InitialR2T preference for this
node:
True = YES,
False = will try to negotiate NO, will accept YES | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.7 |
| cpqiScsiNodeImmediateData mandatory This object indicates ImmediateData preference for this
node
True = YES (but will accept NO),
False = NO | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.8 |
| cpqiScsiNodeMaxOutstandingR2T mandatory Maximum number of outstanding R2Ts allowed per task. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.9 |