cpqiScsiNodeErrorRecoveryLevel
CPQISCSI-MIB ·
.1.3.6.1.4.1.232.169.2.6.1.1.17
Object
column
mandatory
r/w
Integer32
The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imply support in addition to support for the lower error level functions. In other words, error level 2 implies support for levels 0-1, since those functions are subsets of error level 2.
Context
- MIB
- CPQISCSI-MIB
- OID
.1.3.6.1.4.1.232.169.2.6.1.1.17- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- cpqiScsiNodeAttributesEntry
- Table
- cpqiScsiNodeAttributesTable
- Siblings
- 16
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqiScsiNodeInstIndex mandatory An arbitrary integer used to uniquely identify a particular
iSCSI instance. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.169.2.6.1.1.1 |
| cpqiScsiNodeFirstBurstLength mandatory The maximum length (bytes) supported for unsolicited data
to/from this node. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.10 |
| cpqiScsiNodeMaxBurstLength mandatory The maximum number of bytes which can be sent within
a single sequence of Data-In or Data-Out PDUs. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.11 |
| cpqiScsiNodeMaxConnections mandatory The maximum number of connections allowed in each
session to and/or from this node. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.12 |
| cpqiScsiNodeDataSequenceInOrder mandatory The DataSequenceInOrder preference of this node.
False (=No) indicates that iSCSI data PDU sequences may
be transferred in any order. True (=Yes) indicates that
data PDU sequence… | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.13 |
| cpqiScsiNodeDataPDUInOrder mandatory The DataPDUInOrder preference of this node.
False (=No) indicates that iSCSI data PDUs within sequences
may be in any order. True (=Yes) indicates that data PDUs
within sequences… | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.14 |
| cpqiScsiNodeDefaultTime2Wait mandatory The DefaultTime2Wait preference of this node.
This is the minimum time, in seconds, to wait before attempting
an explicit/implicit logout or active task reassignment after
an unex… | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.15 |
| cpqiScsiNodeDefaultTime2Retain mandatory The DefaultTime2Retain preference of this node.
This is the maximum time, in seconds after an initial wait
(Time2Wait), before which an active task reassignment is still
possible … | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.16 |
| cpqiScsiNodeNodeIndex mandatory An arbitrary integer used to uniquely identify a particular
node within an iSCSI instance present on the local system. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.169.2.6.1.1.2 |
| cpqiScsiNodeName mandatory A character string that is a globally unique identifier for
this iSCSI node. The node name is independent of the location
of the node, and can be resolved into a set of addresses… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.169.2.6.1.1.3 |
| cpqiScsiNodeAlias mandatory A character string that is a human-readable name or
description of the iSCSI node. If configured, this alias
may be communicated to the initiator or target node at
the remote end… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.169.2.6.1.1.4 |
| cpqiScsiNodeRoles mandatory A node can operate in one or both of two roles:
a target role and/or an initiator role. If the node
will operate in both roles, both bits must be set.
When a new cp… | column | OctetString | .1.3.6.1.4.1.232.169.2.6.1.1.5 |
| cpqiScsiNodeTransportType mandatory A pointer to the corresponding scsiTrnspt object in
the SCSI MIB (which in turn points to this iSCSI node)
allowing management stations to locate the SCSI-level
Device that is rep… | column | ObjectIdentifier | .1.3.6.1.4.1.232.169.2.6.1.1.6 |
| cpqiScsiNodeInitialR2T mandatory This object indicates the InitialR2T preference for this
node:
True = YES,
False = will try to negotiate NO, will accept YES | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.7 |
| cpqiScsiNodeImmediateData mandatory This object indicates ImmediateData preference for this
node
True = YES (but will accept NO),
False = NO | column | Enumeration | .1.3.6.1.4.1.232.169.2.6.1.1.8 |
| cpqiScsiNodeMaxOutstandingR2T mandatory Maximum number of outstanding R2Ts allowed per task. | column | Integer32 | .1.3.6.1.4.1.232.169.2.6.1.1.9 |