cpqiScsiNodeAlias

CPQISCSI-MIB · .1.3.6.1.4.1.232.169.2.6.1.1.4
MIB view Table view

Object

column mandatory RFC1213-MIBDisplayString 
A character string that is a human-readable name or
description of the iSCSI node.  If configured, this alias
may be communicated to the initiator or target node at
the remote end of the connection during a Login Request
or Response message.  This string is not used as an
identifier, but can be displayed by the system's user
interface in a list of initiators and/or targets to
which it is connected.
              
If no alias is configured, this object is a zero-length
string.

Context

MIB
CPQISCSI-MIB
OID
.1.3.6.1.4.1.232.169.2.6.1.1.4
Type
column
Access
readonly
Status
mandatory
Parent
cpqiScsiNodeAttributesEntry
Table
cpqiScsiNodeAttributesTable
Siblings
16

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cpqiScsiNodeInstIndex mandatory
An arbitrary integer used to uniquely identify a particular iSCSI instance.
columnRFC1155-SMIGauge.1.3.6.1.4.1.232.169.2.6.1.1.1
cpqiScsiNodeFirstBurstLength mandatory
The maximum length (bytes) supported for unsolicited data to/from this node.
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.10
cpqiScsiNodeMaxBurstLength mandatory
The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs.
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.11
cpqiScsiNodeMaxConnections mandatory
The maximum number of connections allowed in each session to and/or from this node.
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.12
cpqiScsiNodeDataSequenceInOrder mandatory
The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequence…
columnEnumeration.1.3.6.1.4.1.232.169.2.6.1.1.13
cpqiScsiNodeDataPDUInOrder mandatory
The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences…
columnEnumeration.1.3.6.1.4.1.232.169.2.6.1.1.14
cpqiScsiNodeDefaultTime2Wait mandatory
The DefaultTime2Wait preference of this node. This is the minimum time, in seconds, to wait before attempting an explicit/implicit logout or active task reassignment after an unex…
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.15
cpqiScsiNodeDefaultTime2Retain mandatory
The DefaultTime2Retain preference of this node. This is the maximum time, in seconds after an initial wait (Time2Wait), before which an active task reassignment is still possible …
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.16
cpqiScsiNodeErrorRecoveryLevel mandatory
The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imp…
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.17
cpqiScsiNodeNodeIndex mandatory
An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system.
columnRFC1155-SMIGauge.1.3.6.1.4.1.232.169.2.6.1.1.2
cpqiScsiNodeName mandatory
A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of addresses…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.232.169.2.6.1.1.3
cpqiScsiNodeRoles mandatory
A node can operate in one or both of two roles: a target role and/or an initiator role. If the node will operate in both roles, both bits must be set. When a new cp…
columnOctetString.1.3.6.1.4.1.232.169.2.6.1.1.5
cpqiScsiNodeTransportType mandatory
A pointer to the corresponding scsiTrnspt object in the SCSI MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device that is rep…
columnObjectIdentifier.1.3.6.1.4.1.232.169.2.6.1.1.6
cpqiScsiNodeInitialR2T mandatory
This object indicates the InitialR2T preference for this node: True = YES, False = will try to negotiate NO, will accept YES
columnEnumeration.1.3.6.1.4.1.232.169.2.6.1.1.7
cpqiScsiNodeImmediateData mandatory
This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO
columnEnumeration.1.3.6.1.4.1.232.169.2.6.1.1.8
cpqiScsiNodeMaxOutstandingR2T mandatory
Maximum number of outstanding R2Ts allowed per task.
columnInteger32.1.3.6.1.4.1.232.169.2.6.1.1.9