cpqFcTapeDriveStatus
CPQFCA-MIB ·
.1.3.6.1.4.1.232.16.3.3.1.1.10
Object
column
mandatory
Enumeration
External Tape Drive Status.
The tape drive can be in one of the following states:
other(1)
The tape drive is in a state other than one of those listed
below.
ok(2)
Indicates that the tape drive is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the tape drive has degraded in some manner.
failed(4)
Indicates that the tape drive has failed and can no longer
return data. The tape drive may need to be replaced.
offline(5)
Indicates that the agent can no longer communicate with the
tape drive. This could be caused by a cabling problem or the
tape drive may be powered off.
missingWasOk(6)
Indicates that a tape drive had a status of OK and is no
longer present. The drive has been removed.
missingWasOffline(7)
Indicates that a tape drive had a status of OFFLINE and is no
longer present. The drive has been removed.
Context
- MIB
- CPQFCA-MIB
- OID
.1.3.6.1.4.1.232.16.3.3.1.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqFcTapeDriveEntry
- Table
- cpqFcTapeDriveTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | ok |
3 | degraded |
4 | failed |
5 | offline |
6 | missingWasOk |
7 | missingWasOffline |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqFcTapeDriveCntlrIndex mandatory External Tape Drive Controller Index.
This value is a logical number whose meaning is OS dependent.
For tape controller has one unique controller number associated
… | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.1 |
| cpqFcTapeDriveCleanReq mandatory External Tape Drive Cleaning Required.
This is an indication of whether the tape drive heads
require a cleaning session to occur. If this variable
indicates a need… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.11 |
| cpqFcTapeDriveCleanTapeRepl mandatory External Tape Drive Cleaning Tape Replacement.
This variable is only applicable to autoloader tape drives.
This variable indicates whether the cleaning tape which i… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.12 |
| cpqFcTapeDriveCondition mandatory External Tape Drive Condition.
This value represents the overall condition of the tape drive. | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.13 |
| cpqFcTapeDriveCleanTapeCount mandatory External Tape Drive Cleaning Tape Count.
This variable is a count from a tape drive of the number of
cleanings done by the tape cleaner last in the drive. | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.14 |
| cpqFcTapeDriveLibraryDrive mandatory External Tape Drive Library Drive.
This variable indicates whether or not the tape drive is part
of a tape library. It can be in one of the following states:
… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.15 |
| cpqFcTapeDriveLocation mandatory External Tape Drive Location.
This is the location of the tape drive. | column | OctetString | .1.3.6.1.4.1.232.16.3.3.1.1.16 |
| cpqFcTapeDriveHotPlug mandatory External Tape Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
supports h… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.17 |
| cpqFcTapeDriveBay mandatory External Tape Drive Bay.
For drives in a hot plug storage system, this is the bay where
the tape drive is located. If the value cannot be determined
or is not appl… | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.18 |
| cpqFcTapeDriveCurrentWidth mandatory External Tape Drive Current Width.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transf… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.19 |
| cpqFcTapeDriveScsiBus mandatory External Tape Drive Scsi Bus.
The bus index indicates to which SCSI bus instance on a tape
controller this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.2 |
| cpqFcTapeDriveCurrentSpeed mandatory External Tape Drive Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated… | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.20 |
| cpqFcTapeDriveScsiTarget mandatory External Tape Drive Scsi Target.
The target index indicates to which SCSI ID on a tape controller
SCSI bus this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.3 |
| cpqFcTapeDriveScsiLun mandatory External Tape Drive Scsi Lun.
The Lun index indicates to which logical unit on a SCSI ID on a
tape controller SCSI bus this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.4 |
| cpqFcTapeDriveSerialNumber mandatory External Tape Drive Serial Number.
This is the unit serial number for the tape drive. It can be
used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.16.3.3.1.1.5 |
| cpqFcTapeDriveModel mandatory External Tape Drive Model.
This is the model name of the tape drive. It can be used for
identification purposes. | column | OctetString | .1.3.6.1.4.1.232.16.3.3.1.1.6 |
| cpqFcTapeDriveFWRev mandatory External Tape Drive Firmware Revision.
This is firmware revision level of the tape drive. It can be
used for identification purposes. | column | OctetString | .1.3.6.1.4.1.232.16.3.3.1.1.7 |
| cpqFcTapeDriveType obsolete External Tape Drive Type.
This is the drive type. It can be used for identification
purposes. The following values are defined:
other(1) The … | column | Enumeration | .1.3.6.1.4.1.232.16.3.3.1.1.8 |
| cpqFcTapeDriveFWSubtype mandatory External Tape Drive Firmware Subtype.
This is used to differentiate the firmware versions
which have the same tape drive type (as specified by
cpqFcTapeDriveType). … | column | Integer32 | .1.3.6.1.4.1.232.16.3.3.1.1.9 |