cpqFcTapeCountersTotalUncorrectable
CPQFCA-MIB ·
.1.3.6.1.4.1.232.16.3.4.1.1.8
Object
Tape Device Total Uncorrectable Errors.
This is the total number of read and write errors which could not
be corrected. This value is maintained since the Tape Hardware
Interface driver was loaded.
Errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have errors, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured.
Context
- MIB
- CPQFCA-MIB
- OID
.1.3.6.1.4.1.232.16.3.4.1.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqFcTapeCountersEntry
- Table
- cpqFcTapeCountersTable
- Siblings
- 8
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqFcTapeCountersCntlrIndex mandatory Fibre Channel Tape Counters Controller Index.
This value is a logical number whose meaning is OS dependent.
Each tape controller has one unique controller number as… | column | Integer32 | .1.3.6.1.4.1.232.16.3.4.1.1.1 |
| cpqFcTapeCountersScsiBus mandatory Fibre Channel Tape Counters Scsi Bus.
The bus index indicates to which SCSI bus instance on a tape
controller this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.4.1.1.2 |
| cpqFcTapeCountersScsiTarget mandatory Fibre Channel Tape Counters Scsi Target.
The target index indicates to which SCSI ID on a tape controller
SCSI bus this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.4.1.1.3 |
| cpqFcTapeCountersScsiLun mandatory Fibre Channel Tape Counters Scsi Lun.
The Lun index indicates to which logical unit on a SCSI ID on a
tape controller SCSI bus this table entry belongs. | column | Integer32 | .1.3.6.1.4.1.232.16.3.4.1.1.4 |
| cpqFcTapeCountersReWrites mandatory Tape Device Re-write count.
This is the number of times blocks had to be re-written to the
device. This value is maintained since the Tape Hardware Interface
drive… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.3.4.1.1.5 |
| cpqFcTapeCountersReReads mandatory Tape Device Re-read count.
This is the number of times blocks had to be re-read from the
device. This value is maintained since the Tape Hardware Interface
driver … | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.3.4.1.1.6 |
| cpqFcTapeCountersTotalErrors mandatory Tape Device Total Errors.
This is the total number of read/write errors encountered.
This value is maintained since the Tape Hardware Interface
driver was loaded.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.3.4.1.1.7 |
| cpqFcTapeCountersTotalBytes mandatory Tape Device Total Bytes.
This is the number total number of bytes read/written to the tape
currently installed in the device. This value is reset whenever
a new ta… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.3.4.1.1.9 |