cpIwfVccMib
CPIWF-R-MIB ·
.1.3.6.1.4.1.164.20.5.1.1.4
Object
scalar
Enumeration
This object points to the MIB where the VCC configuration
information can be found. The value of this object should
be as follows:-
af-nm-0165 - indicates that the CP-IWF supports ILMI
for PVC auto-configuration. And the CO-IWF should apply
the index objects, vpi and vci, to the atmfVccTable in
the ILMI MIB (af-nm-0165.000).
rfc2515 - indicates that the CP-IWF supports the AToM MIB.
And the CO-IWF should apply the index objects, vpi and vci,
to the atmVclTable in the AToM MIB (RFC 2515).
The CP-IWF shall support one or other of these MIBs for
holding VCC configuration information.
Default value is atmfAutoConfigGroup
Context
- MIB
- CPIWF-R-MIB
- OID
.1.3.6.1.4.1.164.20.5.1.1.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cpIwf
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | af-nm-0165 |
2 | rfc2515 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfIfIndex The index of the AAL2 to which this CP-IWF is associated.
Default value 0 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.1 |
| cpIwfNumDs0Bundles The total number of DS0 bundles on the CP-IWF. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.10 |
| cpIwfLineSignaling This object defines the line signal coding for CAS.
It represents four parameters, by two octet (nibble per parameter
Bit 7 = MSB, Bit 0 = LSB ) as follows:
RINGING Code- MSB nibb… | scalar | OctetString | .1.3.6.1.4.1.164.20.5.1.1.11 |
| cpIwfVpi The VPI of the AAL2 VCC to which this CP-IWF is associated.
Default value 0 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.2 |
| cpIwfNumIsdnPriPorts The total number of ISDN-PRI user ports on the CP-IWF. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.28 |
| cpIwfIsdnPriPortEncodingSelectionMode This object controls the encoding switching for ISDN PRI user
ports.
masterSlave - the profile entry used by the CP-IWF is the same
as that selected by the CO-IWF.
independent - t… | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.1.29 |
| cpIwfVci The VCI of the AAL2 VCC to which this CP-IWF is associated.
Default value 40 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.3 |
| cpIwfNumPotsPorts The total number of POTS user ports on the CP-IWF. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.5 |
| cpIwfNumIsdnBriPorts The total number of ISDN-BRI user ports on the CP-IWF. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.1.6 |
| cpIwfTimingReference ntr - network timing reference, voice timing derived from
the WAN interface.
adaptiveVoice - voice timing derived from incoming
cell rate.
freeRun - voice timing derived … | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.1.7 |
| cpIwfPotsPortEncodingSelectionMode This objects controls the encoding switching for POTS user
ports.
masterSlave, the profile entry used by the CP-IWF is the same
as that selected by the CO-IWF.
indepndent - … | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.1.8 |
| cpIwfIsdnBriPortEncodingSelectionMode This objects controls the encoding switching for ISDN-BRI user
ports.
masterSlave, the profile entry used by the CP-IWF is the same
as that selected by the CO-IWF.
indepnden… | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.1.9 |