cpIwfAal2CpsMaxMultiplexedChannels
CPIWF-R-MIB ·
.1.3.6.1.4.1.164.20.5.1.2.2
Object
scalar
r/w
Integer32
Maximum number of multiplexed channels.
Default value { 255 }
Context
- MIB
- CPIWF-R-MIB
- OID
.1.3.6.1.4.1.164.20.5.1.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cpIwfAal2Profile
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpIwfAal2ApplicationIdentifier This attribute describes the application identifier, which
describes the type of signaling used. The value of this object
should be one of those values given in the administered l… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.2.1 |
| cpIwfAal2SscsPcmEncoding This attribute describes the type of PCM encoding used.
Default value { a-law } | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.2.10 |
| cpIwfAal2SscsMaxSssarSduLength This is the maximum size that SSSAR_SDU can take as defined in
ITU - I.366.1. This parameter only applies to those AAl2 Channels
using I.366.1. SSSAR. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.2.11 |
| cpIwfAal2SscsPredefinedProfileIdentifier The ITU-T predefined profile: 1..255.
Default value { 1}
For LA-140 Agent version Greater or equal to 2.0,
ATM Forum Identifier for predefined profile are used,
accord… | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.2.12 |
| cpIwfAal2SscsIeeeOui This attribute contains the IEEE Organizationally Unique
Identifier (OUI) of the entity that specified the profile
being used, if other than ITU-T. For example, if the source
is t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.20.5.1.2.13 |
| cpIwfAal2CpsMaxSDULength Maximum CPS-SDU size given in octets.
Default value { 45 } | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.2.3 |
| cpIwfAal2CpsCIDLowerLimit The minimum value the CID can take for AAL2 bearer channels and
ISDN D Channels.
Default value { 16 } | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.2.4 |
| cpIwfAal2CpsCIDUpperLimit The maximum value the CID can take for AAL2 bearer channels and
ISDN D Channels.
Default value { 255 } | scalar | Integer32 | .1.3.6.1.4.1.164.20.5.1.2.5 |
| cpIwfAal2CpsOptimisation This object refers to the mode of operation of the CPS on the
CP-IWF. The value of this object imposes a restriction on the CPS
SDU length and hence must override the value of cp… | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.2.6 |
| cpIwfAal2SscsFaxModulationTransport This specifies whether fax demodulation is enabled or disabled.
An SNMP Set to enable(2) when Fax Demodulation is not supported
must result in an SNMP response with error status o… | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.2.7 |
| cpIwfAal2SscsCasSignalingTransport This attribute describes whether CAS signaling is transport is
enabled or disabled.
Default value {disabled} | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.2.8 |
| cpIwfAal2SscsDtmfDigitPacketTransport This attribute describes whether DTMF digit packets transport is
enabled or disabled.
Default value { disabled } | scalar | Enumeration | .1.3.6.1.4.1.164.20.5.1.2.9 |