subportPortMode

CORIANT-GROOVE-MIB · .1.3.6.1.4.1.42229.1.2.3.7.1.1.4
MIB view Table view

Object

column CoriantTypesPortMode 
The working mode of port. 
For client side:
CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable.
Default is 100GBE when card created.
              
CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable;
applicable to subport 1 to 4; possible values are: 10GBE, not-applicable.
Default is not-applicable.
              					
For Line side:
CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G.
Default is 16QAM_200G.
              
non applicable : there shall not be service created on the port or subport
subport: the port shall create four subports under the port to support 4x10G.
40GBE: 40GBE service shall be created on the port with default mapping GMP.
10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff.
100GBE: 100GBE service shall be created on the subport with default mapping GMP.
QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port.
16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port.
8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports.
              
Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service.
              					
Restrictions:
Changing Port mode shall be allowed only if the impacted port or subport object is administratively down.
Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'.
If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied.
If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port.
When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal.
              
	Conditions:(../port-type = 'line') or (../port-type = 'client') or (../port-type = 'client-subport')
              	
	default value :not-applicable

Context

MIB
CORIANT-GROOVE-MIB
OID
.1.3.6.1.4.1.42229.1.2.3.7.1.1.4
Type
column
Access
readonly
Status
current
Parent
subportEntry
Table
subportTable
Siblings
18

Syntax

CoriantTypesPortMode
Source
CoriantTypesPortMode
Base type
Enumeration

Values & Constraints

Type Values
0notApplicable
1t10gbe
2t40gbe
3t100gbe
4subport
5qpsk100g
6t8qam300g
7t16qam200g
8fc16g
9fc8g
10otu4
12otu2
13otu2e
14oc192
15stm64
16ochosOtu2
17ochosOtu2e
18t8qam200g
19t10gwanSonet
20t10gwanSdh
21t64qam600g
22t400gbe
23spqpsk100g
24spqpskQpsk100g
25qpsk200g
26sp16qam200g
27t32qam200g
28qpskSp16qam200g
29t16qam300g
30sp16qam300g
31t32qam300g
32t64qam300g
33sp16qam16qam300g
34t16qam400g
35t32qam400g
36t64qam400g
37t16qam32qam400g
38t32qam500g
39t64qam500g
40t32qam64qam500g
41otu4Transparent
42qpsk100gTransparent
43sp16qam16qam200g
44t32qam64qam600g
45t1gbe
46oc48
47stm16
48sp16qam300gC
49qpskSp16qam300gC
50t16qam32qam500gC
51t16qam500gC
52sp16qam500gC
53qpskSp16qam500gC
54t32qam64qam700gC
55t16qam700gC
56sp16qam16qam700gC
57t32qam900gC
58t16qam32qam900gC
59t32qam64qam1100gC
60spqpskQpsk200g
61qpskSp16qam300g
62sp16qam16qam400g
63t16qam32qam500g

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
subportId
The identifier is defined to uniquely identify the subport.
columnCoriantTypesPortId.1.3.6.1.4.1.42229.1.2.3.7.1.1.1
subportConnectedTo
Indicate neighbour port/facility entity to which the current port/facility is connected to.
columnOctetString.1.3.6.1.4.1.42229.1.2.3.7.1.1.10
subportArcConfig
The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.11
subportArcState
The current mode of the Alarm Report Control (ARC). default value :nalm-qi
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.12
subportArcSubState
Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.13
subportArcTimer
The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440
columnUnsigned32.1.3.6.1.4.1.42229.1.2.3.7.1.1.14
subportArcRemainingTime
The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. default value :00d-00h:00m:00s
columnOctetString.1.3.6.1.4.1.42229.1.2.3.7.1.1.15
subportRxOpticalPower
Received optical power
columnCoriantTypesOpticalPower.1.3.6.1.4.1.42229.1.2.3.7.1.1.16
subportTxOpticalPower
Transmitted optical power
columnCoriantTypesOpticalPower.1.3.6.1.4.1.42229.1.2.3.7.1.1.17
subportExternalConnectivity
Indicates the port is connected externally or not. default value :no
columnCoriantTypesYesNo.1.3.6.1.4.1.42229.1.2.3.7.1.1.18
subportDirectionType
Supported direction of the optical port.
columnCoriantTypesTypeOfDirection.1.3.6.1.4.1.42229.1.2.3.7.1.1.19
subportPortName
The name of the port. default value :unspecified
columnCoriantTypesNameIdentifier.1.3.6.1.4.1.42229.1.2.3.7.1.1.2
subportPortType
The type of port. Needs to be provided upon Port creation default value :optical-nomon
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.3
subportAdminStatus
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independent…
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.5
subportOperStatus
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operation…
columnEnumeration.1.3.6.1.4.1.42229.1.2.3.7.1.1.6
subportAvailStatus
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' '…
columnBits.1.3.6.1.4.1.42229.1.2.3.7.1.1.7
subportAliasName
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
columnOctetString.1.3.6.1.4.1.42229.1.2.3.7.1.1.8
subportServiceLabel
Path/service name of cross-connection related facility. default value :
columnOctetString.1.3.6.1.4.1.42229.1.2.3.7.1.1.9