stm16OperStatus
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.3
Object
column
Enumeration
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- stm16Entry
- Table
- stm16Table
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stm16MappingMode The mapping mode of client port packets into ODUk.
default value :not-applicable | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.1 |
| stm16AlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.10 |
| stm16LoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.11 |
| stm16LoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.12 |
| stm16TestSignalType The type mode of test signal.
default value :NONE | column | CoriantTypesTestSignalType | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.13 |
| stm16TestSignalEnable The enable switching of test signal function
default value :NONE | column | CoriantTypesTestSignalConfig | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.14 |
| stm16ServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.15 |
| stm16ManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.16 |
| stm16ExpTrc The expected trc(trail trace identification) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.17 |
| stm16TxTrc The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm' | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.18 |
| stm16RxTrc The received trc(trail trace identification) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.19 |
| stm16AdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.2 |
| stm16TimAct The enable switching of inserting AIS by tim function
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.20 |
| stm16TimMonitor The enable switching of tim defect monitor mode
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.21 |
| stm16AisType NULL
default value :Generic-AIS | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.22 |
| stm16AvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.4 |
| stm16AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.5 |
| stm16ClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.6 |
| stm16ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.7 |
| stm16HoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.8 |
| stm16NearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.9 |