stm16LoopbackType

CORIANT-GROOVE-MIB · .1.3.6.1.4.1.42229.1.2.4.1.58.1.1.12
MIB view Table view

Object

column Enumeration 
The type mode of loopback function
              
              
default value :none

Context

MIB
CORIANT-GROOVE-MIB
OID
.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.12
Type
column
Access
readonly
Status
current
Parent
stm16Entry
Table
stm16Table
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none
1terminal
2facility

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
stm16MappingMode
The mapping mode of client port packets into ODUk. default value :not-applicable
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.1
stm16AlsDegradeMode
The switching of defect BERSD-ODU trig ALS default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.10
stm16LoopbackEnable
The enable switching of loopback function. default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.11
stm16TestSignalType
The type mode of test signal. default value :NONE
columnCoriantTypesTestSignalType.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.13
stm16TestSignalEnable
The enable switching of test signal function default value :NONE
columnCoriantTypesTestSignalConfig.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.14
stm16ServiceLabel
Path/service name of cross-connection related facility. default value :
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.15
stm16ManagedBy
Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. de…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.16
stm16ExpTrc
The expected trc(trail trace identification)
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.17
stm16TxTrc
The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.18
stm16RxTrc
The received trc(trail trace identification)
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.19
stm16AdminStatus
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independent…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.2
stm16TimAct
The enable switching of inserting AIS by tim function default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.20
stm16TimMonitor
The enable switching of tim defect monitor mode default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.21
stm16AisType
NULL default value :Generic-AIS
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.22
stm16OperStatus
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operation…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.3
stm16AvailStatus
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' '…
columnBits.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.4
stm16AliasName
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.5
stm16ClientShutdown
The switching of client-shutdown. default value :no
columnCoriantTypesYesNo.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.6
stm16ClientShutdownHoldoffTimer
The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0
columnUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.7
stm16HoldoffSignal
Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value…
columnCoriantTypesYesNo.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.8
stm16NearEndAls
The switching of near end ALS. default value :no
columnCoriantTypesYesNo.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.9