portMode

The working mode of port. 
For client side:
CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable.
Default is 100GBE when card created.
              
CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable;
applicable to subport 1 to 4; possible values are: 10GBE, not-applicable.
Default is not-applicable.
              					
For Line side:
CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G.
Default is 16QAM_200G.
              
non applicable : there shall not be service created on the port or subport
subport: the port shall create four subports under the port to support 4x10G.
40GBE: 40GBE service shall be created on the port with default mapping GMP.
10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff.
100GBE: 100GBE service shall be created on the subport with default mapping GMP.
QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port.
16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port.
8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports.
              
Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service.
              					
Restrictions:
Changing Port mode shall be allowed only if the impacted port or subport object is administratively down.
Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'.
If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied.
If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port.
When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal.
              
	Conditions:(../port-type = 'line') or (../port-type = 'client') or (../port-type = 'client-subport')
              	
	default value :not-applicable

MIB

CORIANT-GROOVE-MIB

OID

.1.3.6.1.4.1.42229.1.2.3.6.1.1.18

Type

column

Access

readonly

Status

current

Parent

portEntry