otu4DegradeThreshold
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19
Object
column
Unsigned32
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :128459
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- otu4Entry
- Table
- otu4Table
- Siblings
- 26
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-2590845
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otu4FecType The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709 | column | CoriantTypesOtukFec | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1 |
| otu4TxSapi The transmitter sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10 |
| otu4TxDapi The transmitter dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11 |
| otu4TxOperator The transmitter operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12 |
| otu4TimDefectMode The tim defect selection mode
default value :NONE | column | CoriantTypesTimMode | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13 |
| otu4TimAct The enable switching of inserting AIS by tim function
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14 |
| otu4RxSapi The received sapi(Source Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15 |
| otu4RxDapi The received dapi(Destination Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16 |
| otu4RxOperator The received operator TTI | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17 |
| otu4DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
… | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18 |
| otu4AdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2 |
| otu4LoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20 |
| otu4LoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21 |
| otu4ClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22 |
| otu4ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23 |
| otu4HoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24 |
| otu4NearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25 |
| otu4AlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26 |
| otu4ManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.27 |
| otu4OperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3 |
| otu4AvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4 |
| otu4AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5 |
| otu4ServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6 |
| otu4ExpSapi The expected sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7 |
| otu4ExpDapi The expected dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8 |
| otu4ExpOperator The expected operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9 |