otu2eLoopbackType
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21
Object
column
Enumeration
The type mode of loopback function
default value :none
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- otu2eEntry
- Table
- otu2eTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | terminal |
2 | facility |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otu2eFecType The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709 | column | CoriantTypesOtukFec | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1 |
| otu2eTxSapi The transmitter sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10 |
| otu2eTxDapi The transmitter dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11 |
| otu2eTxOperator The transmitter operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12 |
| otu2eTimDefectMode The tim defect selection mode
default value :NONE | column | CoriantTypesTimMode | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13 |
| otu2eTimAct The enable switching of inserting AIS by tim function
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14 |
| otu2eRxSapi The received sapi(Source Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15 |
| otu2eRxDapi The received dapi(Destination Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16 |
| otu2eRxOperator The received operator TTI | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17 |
| otu2eDegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
… | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18 |
| otu2eDegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :12748 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19 |
| otu2eAdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2 |
| otu2eLoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20 |
| otu2eManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.22 |
| otu2eClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.24 |
| otu2eClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.25 |
| otu2eHoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.26 |
| otu2eNearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.27 |
| otu2eAlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.28 |
| otu2eOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3 |
| otu2eAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4 |
| otu2eAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5 |
| otu2eServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6 |
| otu2eExpSapi The expected sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7 |
| otu2eExpDapi The expected dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8 |
| otu2eExpOperator The expected operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9 |