otu2eAdminStatus
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2
Object
column
Enumeration
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- otu2eEntry
- Table
- otu2eTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | upNoAlm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otu2eFecType The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709 | column | CoriantTypesOtukFec | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1 |
| otu2eTxSapi The transmitter sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10 |
| otu2eTxDapi The transmitter dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11 |
| otu2eTxOperator The transmitter operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12 |
| otu2eTimDefectMode The tim defect selection mode
default value :NONE | column | CoriantTypesTimMode | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13 |
| otu2eTimAct The enable switching of inserting AIS by tim function
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14 |
| otu2eRxSapi The received sapi(Source Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15 |
| otu2eRxDapi The received dapi(Destination Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16 |
| otu2eRxOperator The received operator TTI | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17 |
| otu2eDegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
… | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18 |
| otu2eDegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :12748 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19 |
| otu2eLoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20 |
| otu2eLoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21 |
| otu2eManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.22 |
| otu2eClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.24 |
| otu2eClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.25 |
| otu2eHoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.26 |
| otu2eNearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.27 |
| otu2eAlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.28 |
| otu2eOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3 |
| otu2eAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4 |
| otu2eAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5 |
| otu2eServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6 |
| otu2eExpSapi The expected sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7 |
| otu2eExpDapi The expected dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8 |
| otu2eExpOperator The expected operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9 |